Finite Element Analysis of Orthogonally Stiffened Annular Sector Plates
Publication: Journal of Engineering Mechanics
Volume 115, Issue 9
Abstract
The finite element analysis of an orthogonally stiffened annular sector plate is presented by combining the annular sector plate element and the curved beam element. The plate and the curved beam elements are the isoparametric elements in which the effects of shear deformation and rotary inertia have been taken into account. In addition, both these elements are meant to be used for arbitrarily laminated structures and they are based on the higher order theories previously presented for plates, shells, and beams. Numerical results are presented to demonstrate the accuracy and correctness of the present finite element procedure for stiffened plates. Numerical results obtained on circumferentially stiffened sector plates illustrate the accuracy of an equivalent orthotropic plate (EOP) model and the plate‐stiffener system (PSS) model. The limitations of modeling the plate by thin plate elements and stiffeners by thin beam elements are also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barve, V. D., and Dey, S. S. (1983). “Isoparametric finite difference energy method for plate bending problems.” Computers and Struct., 17, 459–465.
2.
Bhimaraddi, A. (1984). “A higher order theory for free vibration analysis of circular cylindrical shells.” Int. J. Solids and Structs., 20, 623–630.
3.
Bhimaraddi, A. (1987). “Static and transient response of rectangular plates.” Thin‐Walled Structures, 5, 125–143.
4.
Bhimaraddi, A. (1988). “Generalized analysis of shear deformable rings and curved beams.” Int. J. Solids and Structs., 24, 363–374.
5.
Bhimaraddi, A., Carr, A. J., and Moss, P. J. (1988a). “A shear deformable finite element for the analysis of general shells of revolution.” Computers and Structs.
6.
Bhimaraddi, A., Carr, A. J., and Moss, P. J. (1988b). “Generalised finite element analysis of laminated curved beams with constant curvature.” Computers and Structs.
7.
Clifton, R. J., Chang, J. C. L., and Au, T. (1963). “Analysis of orthotropic plate bridges,” J. Struct. Div., ASCE, 39, 133–171.
8.
Harik, I. E. (1984). “Analytical solution to orthotropic sector.” J. Engrg. Mech., ASCE, 110, 554–568.
9.
Harik, I. E., and Haddad, B. F. (1987). “ASM solution of stiffened sector plates.” J. Engrg. Mech., 113, 1809–1825.
10.
Kohnke, P. C., and Schnobrich, W. C. (1972). “Analysis of eccentrically stiffened cylindrical shells.” J. Struct. Div., ASCE, 98, 1493–1510.
11.
Lo, K. H., Christensen, R. M., and Wu, E. M. (1977). “A higher‐order theory for plate deformation, pt. 1—Homogeneous plates.” J. Appl. Mech., 44, 663–668.
12.
Olson, M. D., and Hazell, C. R. (1977). “Vibration studies on some integral ribstiffened plates.” J. Sound and Vib., 50, 43–61.
13.
Panc, V. (1975). Theories of elastic plates. Noordhoff Int. Publishing, Leyden, The Netherlands.
14.
Ramakrishnan, R., and Kunukkusseril, V. X. (1976). “Free vibration of stiffened circular bridge decks.” J. Sound and Vib., 44, 209–221.
15.
Reissner, E. (1985). “Reflections on the theory of elastic plates.” Appl. Mech. Rev., 38, 1453–1464.
16.
Srinivasan, R. S., and Thiruvenkatachari, V. (1985). “Static and dynamic analysis of stiffened plates.” Computers and Structs., 21, 395–403.
17.
Srinivasan, R. S., and Thiruvenkatachari, V. (1986). “Free vibration analysis of laminated annular sector plates.” J. Sound and Vibration, 109, 89–96.
18.
Troitsky, M. S. (1976). Stiffened plates, bending, stability and vibrations, Elsevier, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Sep 1, 1989
Published in print: Sep 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.