Frictional Punch and Crack in Plane Elasticity
Publication: Journal of Engineering Mechanics
Volume 115, Issue 6
Abstract
A general solution to the frictional punch problem is obtained for any shape, but the part of the punch is a straight boundary. As an example, a crack initiating from an end of the punch in an elastic half‐plane is analyzed. A rational mapping function and complex stress functions are used for the analysis. The stress distributions, the stress intensity factors and the resultant moment to keep the punch horizontal are evaluated for some Poisson's ratio and frictional coefficient. For a short crack, the effect of the frictional coefficient to the stress intensity factor is investigated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Galin, L. A. (1953). Contact problems in the theory of elasticity, Moscow, U.S.S.R. (in Russian).
2.
Gladwell, G. M. (1980). Contact problems in the classical theory of elasticity. Sijth‐off & Noordhoff, The Netherlands.
3.
Hasebe, N., and Iida, J. (1980). “A crack originating from a triangular notch on a rim of a semi‐infinite plate.” Engrg. Fracture Mech., 10, 773–782.
4.
Hasebe, N., and Inohara, S. (1980). “Stress analysis of a semi‐infinite plate with an oblique edge crack.” Ingenieur Archiv, 49, 51–62.
5.
Hasebe, N. (1981). “An edge crack in a semi‐infinite plate welded to a rigid stiffener.” Proc. Japan Soc. of Civ. Engrs., 314, 149–157.
6.
Hasebe, N. (1984). “Mixed boundary value problem of plate with crack.” Engrg. Mech., ASCE, 110(1), 37–48.
7.
Hasebe, N., et al. (1988). “Mixed boundary value problem of simple support type in plane elasticity.” Acta Mechanica.
8.
Kaneta, M., Yatsuzuka, H., and Murakami, Y. (1985) “Mechanism of crack growth in lubricated rolling sliding contact.” ASLE Transactions, 28(3), 407–414.
9.
Kaneta, M., Suetsugu, M., and Murakami, Y. (1986). “Mechanism of surface crack growth in lubricated rolling/sliding spherical contact.” J. Appl. Mech., 53, 354–360.
10.
Keer, L. M., Bryant, M. D., and Haritos, G. K. (1982). “Subsurface and surface cracking due to Hertzian contact.” J. Lubrication Tech., 104, 347–351.
11.
Keer, L. M., and Bryant, M. D. (1983). “A pitting model for rolling contact fatigue.” J. Lubrication Tech., 105, 198–205.
12.
Murakami, Y., Kaneta, M., and Yatsuzuka, H. (1985). “Analysis of surface crack propagation in lubricated rolling contact.” ASLE Trans., 28(1), 60–68.
13.
Murakami, Y., ed. (1986). Stress intensity factors handbook. Pergamon Press, Oxford, U.K.
14.
Muskhelishvili, N. I. (1963). Some basic problems of mathematical theory of elasticity. 4th Ed., Noordhoff, The Netherlands.
15.
Pater, A. D., and Kalker, J. J. eds. (1974). “The mechanics of the contact between deformable bodies.” Proc., Symp. of IUTAM, Delft Univ. Press.
16.
Sheppard, S. D., Hills, D. A., and Barber, J. R. (1986). “An analysis of fretting cracks—II. Unloading and reloading phases.” Int. J. Solids and Structs., 22(4), 387–396.
17.
Sih, G. C. (1973). Handbook of stress intensity factors. Lehigh Univ., Pa. Tada, H. (1973). The stress analysis of cracks handbook. Del Research Corporation, Pa.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 115 • Issue 6 • June 1989
Pages: 1137 - 1149
Copyright
Copyright © 1989 ASCE.
History
Published online: Jun 1, 1989
Published in print: Jun 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.