Analysis Of R/C Panels Using Different Concrete Models
Publication: Journal of Engineering Mechanics
Volume 115, Issue 3
Abstract
The paper describes the application of a series of different concrete models to the analysis of a number of reinforced concrete panels tested by Vecchio and Collins. The different models involve both fixed and “swinging” (rotating) cracks with and without allowance for the tensile strength of the concrete. A simple plasticity model is also applied. Because the numerical solutions are obtained via the arc‐length analysis procedure, the complete (including post‐maximum) load‐deflection responses are traced, and consequently it is possible to clearly identify not only the computed collapse load but also the collapse modes. Differences between the various models as well as differences with the experimental behavior can thereby be investigated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adeghe, L. N., and Collins, M. P. (1986). “A finite element model for studying reinforced concrete detailing problems.” Pub. No. 86‐12, Dept. of Civil Engrg., Univ. of Toronto, Toronto, Canada.
2.
Balakrishnan, S., and Muurray, D. W. (1987). “Prediction of response of concrete beams and panels by nonlinear finite element analysis.” Proc., IABSE Colloq. on Computational Mechanics of Concrete Structures—Advances and Applications, Delft University Press, Delft, The Netherlands, 393–404.
3.
Bažant, Z. P. (1981). Discussion at IABSE Colloq. on “Advanced mechanics of reinforced concrete.” Final Report, Delft University Press, Delft, The Netherlands, 490–491.
4.
Bažant, Z. P. (1983). “Comment on orthotropic models for concrete and geomaterials.” J. of Eng. Mech.Div., ASCE, 109(6), 849–865.
5.
Bažant, Z. P. (1986). “Distributed cracking and non‐local continuum.” Finite element methods for nonlinear problems, P. G. Bergan et al., eds., Springer‐Verlag, 77–102.
6.
Committee on Concrete and Masonry Structures. (1982). Finite element analysis of reinforced concrete: state‐of‐the‐art report. ASCE, New York, N.Y.
7.
Cope, R. J., et al. (1980). “Modelling of reinforced concrete behaviour for finite element analysis of bridge slabs.” Numerical methods for nonlinear problems, C. Taylor et al., eds., Vol. 1, Pineridge Press, Swansea, U.K., 457–470.
8.
Crisfield, M. A. (1981). “A fast incremental/iterative solution procedure that handles snap‐through.” Comp. Struct., 13, 55–62.
9.
Crisfield, M. A., and Wills, J. (1987). “Numerical comparisons using different ‘concrete models’.” Proc., IABSE Colloq. on Computational Mechanics of Concrete Structures—Advances and Applications, Delft University Press, Delft, The Netherlands, 177–188.
10.
Crisfield, M. A., and Wills, J. (1989). “Solution strategies and softening materials.” Comp. Methods Appl. Mech. Engrg. (in press).
11.
de Borst, R. (1987). “Stability and uniqueness in numerical modelling of concrete structures.” Proc., IABSE Colloq. on Computational Mechanics of Concrete Structures—Advances and Applications, Delft University Press, Delft, The Netherlands, 161–176.
12.
de Borst, R., and Nauta, P. (1985). “Non‐orthogonal cracks in a smeared finite element model.” Engrg. Computations, 2, 35–46.
13.
Gupta, A. K., and Akbar, A. (1984). “Cracking in reinforced concrete analysis.” J. Struct. Engrg., ASCE, 110(8), 1735–1746.
14.
Kollegger, J., and Mehlhorn, G. (1987). “Material model for cracked reinforced concrete.” Proc., IABSE Colloq. on Computational Mechanics of Concrete Structures—Advances and Applications, Delft University Press, Delft, The Netherlands, 177–188.
15.
Kupper, H., and Gerstle, K. N. (1973). Behavior of concrete under biaxial stresses. J. Engrg. Mech. Div., ASCE, 99(4), 852–866.
16.
Liu, T. C. Y., Nilson, A. H., and Slate, F. O. (1972). “Biaxial stress‐strain relations for concrete.” J. Struct. Div., ASCE, 98(5), 1025–1034.
17.
Marti, P. (1979). Plastic analysis of reinforced concrete shear walls.” Introductory Report of IABSE Colloq. on Plasticity in Concrete, Zurich, Switzerland, 51–69.
18.
Milford, R. V., and Schnobrich. (1984) “Nonlinear behavior of reinforced concrete cooling towers.” Report ISSN: 0069‐4274, University of Illinois, Urbana, Ill.
19.
Neilson, M. P. (1963). “Yield conditions for reinforced concrete shells in the membrane state.” Non‐classical Shell Problems, Proc., IASS Symp., North‐Holland, Amsterdam, The Netherlands, 1030–1040.
20.
Onate, E., Oliver, J., and Bugeda, G. (1985). “Finite element analysis of the response of concrete dams subjected to internal loads.” Finite Element methods for nonlinear problems, P. G. Bergan et al., eds., Springer‐Verlag, Berlin, Germany, 653–672.
21.
Scanlon, A., and Murray, D. W. (1974). “Time‐dependent reinforced concrete slab deflections.” J. Struct. Div., ASCE, 100(9), 1911–1924.
22.
Willam, K., Pramono, E., and Stein, S. (1987). “Fundamental issues of smeared crack models.” Paper presented at Int. Conf. on Fracture of Concrete and Rock, Houston, Tex., June.
23.
Vecchio, F., and Collins, M. P. (1982). “The response of reinforced concrete to inplane shear and normal stresses.” ISBN 0‐7727‐7029‐8, Pub. No. 82‐03, University of Toronto, Toronto, Canada.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Mar 1, 1989
Published in print: Mar 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.