New Formulation for Vibration Analysis
Publication: Journal of Engineering Mechanics
Volume 115, Issue 3
Abstract
In this study, a dynamic model that determines exact vibration mqdes and frequencies for trusses is formulated. This model, based on the exact representation of element inertia forces, represents the rod vibration problem quasistatically through use of equivalent loads. Thereby, the need to iteratively form and decompose the stiffhess matrix in solving the vibration eigenproblem is eliminated without introducing discretization error. The effectiveness of this formulation is illustrated in numerical examples and tested against the current models available for vibration analysis of trusses. Exact solutions of the first and second modes of a plane truss are assessed with respect to computational efficiency for a given solution accuracy. The study leads to the conclusion that exact eigendata pairs can be evaluated using simpler representations and requiring less computer resources than with the conventional finite element or exact displacement model formulations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akesson, B. A. (1976). “PFVIBAT—A computer program for plane frame vibration analysis by an exact method.” Int. J. Numerical Methods in Engrg., 10, 1221–1231.
2.
Anderson, M. S., and Williams, F. W. (1986). “Natural vibration and buckling of general periodic lattic structures.” AIAA J., 24, 163–169.
3.
Anderson, M. S., et al. (1986). User manual for BUNVIS‐RG: A repetitive geometry and substructuring options, NASA Technical Memorandum 87669.
4.
Clough, R. W., and Penzien, J. (1975). Dynamics of structures. McGraw‐Hill Book Company, New York, N.Y.
5.
Hallauer, W. L., and Liu, R. Y. L. (1982). “Beam bending‐torsion dynamic stiffness method for calculation of exact vibration modes.” J. Sound and Vibration, 85, 105–113.
6.
Kolousek, V. (1941). “Anwendung des Gesetzes der virtuellen Verschiebungen und des Reziprozitatssatzes in der Stabwerksdynamik.” Ingenieur Archiv, 12, 363–370.
7.
Kolousek, V. (1973). “Dynamics in engineering structures.” Halsted Press, New York, N.Y.
8.
Leung, A. Y. T. (1983). “Fast convergence modal analysis for continuous systems.” J. Sound and Vibration, 87, 449–467.
9.
Pilkey, W. D. (1987). “A new look at frequency dependent structural matrices to achieve accurate free dynamics analyses.” Proc., 28th Struct. Dynamics and Materials Conf., Paper No. 87‐0815, Part 2a, 296–299.
10.
Richards, R. H., and Leung, Y. T. (1977). “An accurate method in structural vibration analysis.” J. Sound and Vibration, 55, 363–376.
11.
Smith, H. A. (1987). An improved algorithm for finding vibration modes and frequencies of space trusses. Thesis presented to Duke University, Durham, N.C., in partial fulfillment of the requirements for the degree of Master of Science.
12.
Williams, F. W., and Wittrick, W. H. (1970). “An automated computational procedure for calculating natural frequencies of skeletal structures.” Int. J. Mech. Sci., 12, 781–791.
13.
Williams, F. W., and Wittrick, W. H. (1983). “Exact buckling and frequency calculations surveyed.” J. Struct. Engrg., ASCE, 109(1), 169–187.
14.
Wittrick, W. H., and Williams, F. W. (1971). “A general algorithm for computing natural frequencies of elastic structures.” Quarterly J. Mech. and Appl. Math., XXIV, 263–284.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Mar 1, 1989
Published in print: Mar 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.