Equivalent Systems for Variable Thickness Plates
Publication: Journal of Engineering Mechanics
Volume 115, Issue 10
Abstract
The research work in this paper consists of a rigorous closed form solution regarding the deflection of thin rectangular plates with variable thickness in one dimension. The rigorous closed form solution is given in the form of an equivalent system of flat plates that replaces the original variable thickness plate. The sum of the deflections of the flat plates is equal to the deflection of the original variable thickness plate. A simplified equivalent system is also obtained in order to reduce the mathematical complexity of the problem. Various variable thickness rectangular plates have been solved by using the method stated above, and the results are compared with those obtained by using the finite difference method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Conway, H. D. (1958). “Flexure of infinite rectangular plates of variable thickness.” Ing.‐Arch., 26, 143–145.
2.
Favre, H., and Gilg, B. (1952). “La plaque rectangulaire flechie d'epaisseur linearement variable.” Z. Ange. Math. Mech., 3, 354.
3.
Fertis, D. G. (1973). Dynamics and vibration of structures. John Wiley and Sons, Inc., New York, N.Y.
4.
Fertis, D. G. (1984). Dynamics and vibration of structures. Rev. Ed., Robert E. Krieger Publishing Co., Malabar, Fla.
5.
Fertis, D. G., and Cunningham, H. (1962). “Equivalent systems for shear deflections of variable thickness members.” J. Ind. Math., 12(1).
6.
Fertis, D. G., and Kozma, A. (1962). “Solution of the deflection of variable thickness plates by the method of equivalent systems.” J. Ind. Math., 12(1).
7.
Fertis, D. G., and Mijatov, M. M. (1988). “Equivalent systems for variable thickness plates.” Proc. Southeastern Conf. on Developments in Theoretical and Appl. Mech., Biloxi, Miss.
8.
Fertis, D. G., and Zobel, E. (1958). “Equivalent systems for the deflection of variable stiffness members.” J. Struct. Div., ASCE.
9.
Fertis, D. G., and Zobel, E. (1961). Transverse vibration theory, applications of equivalent systems. Ronald Press, Inc., New York, N.Y.
10.
Fung, Y. C. (1953). “Bending of thin plastic plates of variable thickness.” J. Aeronaut. Sci., 20, 455–463.
11.
Klein, B. (1957). “Shear buckling of simply supported rectangular plates tapered in thickness.” Franklin Inst. J., 263, 537–541.
12.
Melosh, R. J. (1961). “A stiffness matrix for the analysis of thin plates in bending.” J. Aerospace Sci., 28, 34–42.
13.
Mijatov, M. M. (1980). “Analysis of variable thickness plates by the methods of finite difference and equivalent systems,” thesis presented to the University of Akron, at Akron, Ohio, in partial fulfillment of the degree of Master of Science.
14.
Olsson, R. G. (1934). “Biegung der Rechteckplatte bei linear Veranderlicher Biegungssteifigkeit.” Ing. Arch., 5, 363.
15.
Olsson, R. G. (1940). “Biegung der Rechteckplatte von Exponential Veranderlicher Dicke.” Bauingenier, 24, 230.
16.
Olsson, R. G. (1941). “Biegung der Rechteckplatte bei linear Veranderlicher Steifigkeit und Beliebiger Belastung.” Bauingenier, 22, 10.
17.
Reisner, E. (1937). “Remark on the theory of bending of plates of variable thickness.” J. Math. Phys., 16, 43.
18.
Timoshenko, S., and Wainowsky‐Kriger, S. (1959). Theory of plates and shells. McGraw‐Hill Book Company, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Oct 1, 1989
Published in print: Oct 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.