Strain Rate Effect on Structural Steel under Cyclic Loading
Publication: Journal of Engineering Mechanics
Volume 113, Issue 9
Abstract
The strain rate and strain rate history effects on the inelastic stressstrain behavior of annealed A‐36 structural steel at room temperature are examined experimentally under monotonic and cyclic loading conditions. The strain rate used is between which covers the range that might be experienced by steel building frames during earthquake ground motions. An axial‐torsional, electrohydraulic, servocontrolled testing system with strain control is used for all the tests. Test results show relatively more significant strain rate sensitivity of the material for monotonic loading and less significant strain rate sensitivity for cyclic loading. Strain rate hfstory effect is not significant in most of the tests.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Clifton, R. L., “Dynamic Plasticity,” Journal of Applied Mechanics, Vol. 50, Dec., 1983, p. 941.
2.
Duffy, J., The Dynamic Plastic Deformation of Metals: A Review, Air Force Wright Aeronautical Laboratories, Technical Report No. AFWAL‐TR‐82‐4024, 1982.
3.
Eleiche, A. M., “Strain‐Rate History and Temperature Effects on the Torsional‐Shear Behavior of a Mild Steel,” Experimental Mechanics, Vol. 21, No. 8, Aug., 1981, pp. 285–294.
4.
Frantz, R. A., and Duffy, J., “The Dynamic Stress‐Strain Behavior in Torsion of 1100‐0 Aluminum Subjected to a Sharp Increase in Strain Rate,” Journal of Applied Mechanics, Vol. 39, 1972, p. 939.
5.
Harding, J., Ed., Mechanical Properties at High Rates of Strain, The Institute of Physics, London, U.K., 1980.
6.
Harding, J., and Welsh, L. M., “A Tensile Testing Technique for Fiber‐Reinforced Composite at Impact Rates of Strain,” Journal of Material Science, No. 18, 1983, pp. 1810–1826.
7.
Hartley, K. A., and Duffy, J., “Strain Rate and Temperature History Effect during Deformation of fcc abd bcc Metals,” The Institute of Physics Conference Series No. 70, 1984, pp. 21–30.
8.
Krempl, E., “An Experimental Study of Room Temperature Rate‐Sensitiviry, Creep, and Relaxation of AISI Type 304 Stainless Steel,” Journal of Mechanics and Physics of Solids, Vol. 27, 1979, p. 363.
9.
Lee, G. C., “Pilot Study on the Dynamic Behavior of Steel Gable Frames,” WRC Progress Report, Sep., 1984, pp. 24–38.
10.
Lindholm, U. S., Ed., Mechanical Behavior of Materials under Dynamic Loads, Spring‐Verlag, New York, N.Y., 1968.
11.
Lindholm, U. S., Yeakley, L. M., and Nagy, A., AFML‐TR‐149, Wright‐Patterson Air Force Base, Air Force Material Laboratory, Ohio, 1971.
12.
Malvern, L. E., “Experimental and Theoretical Approaches to Characterization of Material Behavior at High Strain Rates of Deformation,” presented at the 3rd Conference on the Mechanical Properties of Materials at High Rates of Strain, held at Qxford, U.K., 1984.
13.
Marsh, K. J., and Campbell, J. D., “The Effect of Strain Rate on the Post‐Yield Flow of Mild Steel,” Journal of Mechanics and Physics of Solids, Vol. 11, 1963, p. 49.
14.
Mesuid, S. A., and Malvern, L. E., “Experimental Investigation into Load Relaxation in Aluminum (HE30TB) and Mild Steel (EN1A),” International Journal of Mechanical Science, Vol. 24, No. 5, 1982, pp. 299–312.
15.
Perzyna, P., “Fundamental Problems in Viscoplasticity,” Advances in Applied Mechanics, Vol. 9, 1966, pp. 243–377.
16.
Yen, C. F., Wang, K. F., and Hsaio, W. C., “An Experimental Study of the Uniaxial Rate‐Dependent Behavior of Type 304 Stainless Steel at Room Temperature,” Proceedings, 1986 SEM Spring Conference on Experimental Mechanics, held at New Orleans, La., Jun., 1986, pp. 720–728.
17.
Zukas, J. A., Nicholas, T., Swift, H. F., Greszczuk, L. B., and Curran, D. R., Impact Dynamics, John Wiley and Sons, New York, N.Y., 1982.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Sep 1, 1987
Published in print: Sep 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.