Reliability of Highly Redundant Plastic Structures
Publication: Journal of Engineering Mechanics
Volume 110, Issue 5
Abstract
Reliability analysis of highly redundant ideal‐plastic structures is difficult due to the existence of a very large number of possible failure modes. If only some of the failure modes are identified and included in the reliability calculation, the result will be an overestimation of the reliability. However, the lower bound theorem of plasticity theory allows for a calculation that underestimates the reliability. This theorem is applied to construct lower bounds that are optimized in a certain sense. Only a suboptimization is practicable. Therefore the resulting lower bounds are not particularly close to the exact reliability. However, some theorems originating from the lower bound optimization analysis turn out to be useful for defining a strategy of search for the most important collapse mechanisms of certain general types of models of plastic frame and truss structures. The total reliability can only be calculated up to upper and lower bounds, but examples show that the upper bound defined by the identified mechanisms is close to the mathematically exact reliability.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ang, A. H.‐S., and Ma, H.‐F., “On the Reliability of Structural Systems,” Proceedings of ICOSSAR'81: Structural Safety and Reliability, T. Moan and M. Shinozuka, eds., Elsevier, Amsterdam, 1981, pp. 295–314.
2.
Augusti, G., and Baratta, A., “Limit Analysis of Structures with Stochastic Strength Variations,” Journal of Structural Mechanics, Vol. 1, No. 1, 1972, pp. 43–62.
3.
Augusti, G., and Baratta, A., “Probabilistic Limit Analysis and Design of Structures and Earthwork: The Static Approach,” Proceedings of the 2nd International Conference on Application of Statistics and Probability in Soil and Structural Engineering, Aachen, (Deutsche Gesellschaft für Erd‐ und Grundbau e.V., Essen, F.R. Germany), 1975, pp. 7–26.
4.
Ditlevsen, O., “Generalized Second Moment Reliability Index,” Journal of Structural Mechanics, Vol. 7, No. 4, 1979, pp. 435–451.
5.
Ditlevsen, O., “Narrow Reliability Bounds for Structural Systems,” Journal of Structural Mechanics, Vol. 7, No. 4, 1979, pp. 453–472.
6.
Ditlevsen, O., Uncertainty Modeling, McGraw Hill, New York, N.Y., 1981.
7.
Ditlevsen, O., “System Reliability Bounding by Conditioning,” Journal of the Engineering Mechanics Division, ASCE, Vol. 108, No. EM5, 1982, pp. 708–718.
8.
Ditlevsen, O., “Basic Reliability Concepts, in Reliability Theory and its Application in Structural and Soil Mechanics,” NATO ASI Series E, P. Thoft‐Christensen, ed., Martinus Nijhoff Publishers, The Hague, 1983.
9.
Ditlevsen, O., “Gaussian Safety Margins,” Proceedings of ICASP 4: International Conference on Applications of Statistics and Probability in Soil and Structural Engineering, Florence, Italy, 1983.
10.
Gorman, M. R., “Reliability of Structural Systems,” Report No. 79‐2, Case Western Reserve University, Ohio, 1979.
11.
Hasofer, A. M., and Lind, N. C., “Exact and Invariant Second‐Moment Code Format,” Journal of the Engineering Mechanics Division, ASCE, Vol. 100, No. EM1, 1974, pp. 111–121.
12.
Kounias, E. G., “Bounds for the Probability of a Union, with Applications,” The Annals of Mathematical Statistics, Vol. 39, No. 6, 1968, pp. 2154–2158.
13.
Ma, H.‐F., and Ang, A. H.‐S., “Reliability Analysis of Redundant Ductile Structural Systems,” Report No. U1LU‐ENG‐81‐2013, University of Illinois at Urbana, 1981.
14.
Moses, F., “Structural Systems Reliability and Optimization,” Computers and Structures, Vol. 7, 1977, pp. 283–290.
15.
Moses, F., “System Reliability Developments in Structural Engineering,” Structural Safety, Vol. 1, No. 1, 1982, pp. 3–13.
16.
Murotsu, Y., Okada, H., Yonezawa, M., and Taguchi, K., “Reliability Assessment of Redundant Structure,” Proceedings of ICOSSAR'81: Structural Safety and Reliability, T. Moan and M. Shinozuka, eds., Elsevier, Amsterdam, 1981, pp. 315–329.
17.
Murotsu, Y., Okada, H., Yonezawa, M., Grimmelt, M., and Taguchi, K., “Automatic Generation of Stochastically Dominant Modes of Structural Failure in Frame Structure,” Bulletin of University of Osaka Prefecture, Series A, Vol. 39, No. 2, 1981, pp. 85–101.
18.
Sandbye, P., “Normalkraftens indflydelse på jernbetonrammers flydelast (Influence of the Normal Force on the Yield Load of Reinforced Concrete Frame Structures),” B‐Undervisning og Forskning 67, Engineering Academy of Denmark, 1967, pp. 169–174.
19.
Thoft‐Christensen, P., and Søslash;rensen, J. D., “Calculation of Failure Probabilities of Ductile Structures by the β‐Unzipping Method,” Report No. 8208, Institute of Building Technology and Structural Engineering, Aalborg Universitetscenter, Aalborg, Denmark, 1982.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 110 • Issue 5 • May 1984
Pages: 671 - 693
Copyright
Copyright © 1984 ASCE.
History
Published online: May 1, 1984
Published in print: May 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.