Infinite Elements for Ground Freezing Problems
Publication: Journal of Engineering Mechanics
Volume 110, Issue 2
Abstract
In the analysis of artificial ground freezing problems, one encounters the domains of interest extending to infinity. A conventional finite element method deals with these problems by extending the mesh to some considerable distance away from the zone of interest and applying a fixed boundary condition there. This method requires a large number of nodal points in modeling the remote region where the perturbation in the variable of interest is virtually zero. Consequently, the cost of numerical analysis increases. The purpose here is to show how the infinite boundary can be treated within the finite element method by developing infinite elements that can be incorporated into standard finite element programs. The proposed method results in appreciable savings in the computer storage and cost of the analysis. The infinite elements employed possess semi‐infinite domain with properly selected decaying shape functions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, H. S., and Maxwell, R. S., A Textbook of Heat, The MacMillan Co., London, U.K., 1959.
2.
Askar, H. G., “Development and Application of Infinite Elements to Ground Freezing Problems,” thesis presented to the University of Colorado, at Boulder, Colo., in 1982, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
3.
Bettess, P., “Infinite Elements,” International Journal for Numerical Methods in Engineering, England, Vol. 11, 1977, pp. 355–375.
4.
Bettess, P., and Zienkiewicz, O. C., “Diffraction and Refraction of Surface Waves Using Finite and Infinite Elements,” International Journal for Numerical Methods in Engineering, England, Vol. 11, 1977, pp. 1271–1290.
5.
Bonacina, C., et al., “Numerical Solution of Phase‐Change Problems,” International Journal of Heat and Mass Transfer, Oxford, England, Vol. 13, 1970, pp. 1459–1477.
6.
Carslaw, H. S., and Jaeger, J. C., Conduction of Heat in Solids, Oxford University Press, Oxford, England, 1947.
7.
Chen, H. S., and Mei, C. C., “Oscillations and Wave Forces in an Offshore Harbor,” Report No. 190, Ralph M. Parsons Laboratory for Water Resources and Hydrodynamics, Massachusetts Institute of Technology, Cambridge, Mass., Aug., 1974.
8.
Comini, G., et al., “Finite Element Solution of Nonlinear Heat Conduction Problems with Special Reference to Phase Change,” International Journal for Numerical Methods in Engineering, England, Vol. 8, 1974, pp. 613–624.
9.
Cruse, T. A., “Application of the Boundary‐Integral Method to Three‐Dimensional Stress Analysis,” Computers and Structures, Oxford, England, Vol. 3, 1973, pp. 509–527.
10.
Delgiudice, S., Comini, G., and Lewis, R. W., “Finite Element Simulation of Freezing Processes in Soils,” International Journal for Numerical Methods in Engineering, England, Vol. 2, 1978, pp. 223–235.
11.
Gradshteyn, I. S., and Ryzhik, I. M., eds., Table of Integrals, Series, and Products, corrected and enlarged ed., Academic Press, New York, N.Y., 1980.
12.
Habib, I. S., Engineering Analysis Methods, Lexington Book, Canada, 1975.
13.
Lees, M., “A Linear Three‐Level Difference Scheme for Quasi‐Linear Parabolic Equations,” Mathematics of Computation, Vol. 20, 1966, pp. 516–522.
14.
Lemmon, E. C., “Phase‐Change Techniques for Finite Element Conduction Codes,” Proceedings, Numerical Methods in Thermal Problems, R. W. Lewis and K. Morgan, eds., Swansea, England, 1979, pp. 149–158.
15.
Luikov, A. V., Analytical Heat Diffusion Theory, Academic Press, New York, N.Y., 1968.
16.
Lynn, P. P., and Hadid, H. A., “Infinite Elements with Type Decay,” International Journal for Numerical Methods in Engineering, England, Vol. 17, 1981, pp. 347–355.
17.
Lysmer, J., and Waas, G., “Shear Waves in Plane Infinite Structures,” Journal of the Engineering Mechanics Division, ASCE, Vol. 98, No. 1–3, 1972, pp. 85–105.
18.
Morgan, K., Lewis, R. W., and Zienkiewicz, O. C., “An Improved Algorithm for Heat Conduction Problems with Phase Change,” International Journal for Numerical Methods in Engineering, England, Vol. 12, 1978, pp. 1191–1195.
19.
Silvester, P., and Hsieh, M. S., “Finite Element Solution of Two‐Dimensional Exterior‐Field Problems,” Proceedings, Institution of Electrical Engineers, Vol. 118, No. 12, Dec., 1971, pp. 1743–1747.
20.
Squire, W., “An Efficient Iterative Method for Numerical Evaluation of Integrals over a Semi‐Infinite Range,” International Journal for Numerical Methods in Engineering, England, Vol. 10, 1976, pp. 478–484.
21.
Taylor, C., and Hood, P., “A Numerical Solution of the Navier Stokes Equations Using the Finite Element Technique,” Computers and Fluids, Oxford, England, Vol. 1, 1973, pp. 73–100.
22.
Wood, W. L., “On the Finite Element Solution of an Exterior Boundary Value Problem,” International Journal for Numerical Methods in Engineering, England, Vol. 10, 1976, pp. 885–891.
23.
Zienkiewicz, O. C., and Parekh, C. J., “Transient Field Problems: Two‐Dimensional and Three‐Dimensional Analysis by Isoparametric Finite Elements,” International Journal for Numerical Methods in Engineering, England, Vol. 2, 1970, pp. 61–71.
24.
Zienkiewicz, O. C., The Finite Element Method in Engineering Science, 2nd ed., McGraw Hill, London, England, 1971.
25.
Zienkiewicz, O. C., “The Finite Element Method and Boundary Solution Procedures as General Approximation Method for Field Problems,” presented at the October 12–17, 1975, World Congress on Finite Element Methods in Structural Mechanics, held at Bournemouth, England.
26.
Zienkiewicz, O. C., Kelly, D. W., and Bettess, P., “The Coupling of the Finite Element Method and Boundary Solution Procedures,” International Journal for Numerical Methods in Engineering, England, Vol. 11, 1977, pp. 355–375.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Feb 1, 1984
Published in print: Feb 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.