Impact of Booster Chlorination on Chlorine Decay and THM Production: Simulated Analysis
Publication: Journal of Environmental Engineering
Volume 135, Issue 10
Abstract
The effect of conventional and booster chlorination on chlorine residuals and trihalomethane (THM) formation in drinking water distribution systems was modeled using the EPANET hydraulic modeling software. The model results suggest that booster chlorination may allow utilities to meet disinfection goals better by carrying chlorine residuals to remote points in the distribution system while lowering the total mass of chlorine applied to the system. The model results suggest that booster chlorination may provide the greatest advantages to points in the distribution system located near storage tanks by providing a more consistent chlorine residual and possibly reducing THM formation. A new version of the EPANET model, the EPANET Multispecies model, was also used to compare chlorine decay due to reactions in the bulk fluid and reactions occurring at the pipe wall. The results suggest that chlorine decay due to wall reactions can be very significant at remote points in the distribution system. Additionally, if THMs are assumed to form primarily through reactions in the bulk fluid, use of the new EPANET Multispecies software allows for calculation of THM formation based solely on chlorine reactions in the bulk fluid rather than on overall chlorine decay.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers thank Dominic Boccelli of the EPA, Feng Shang of the University of Cincinnati, and Vanessa Speight of Malcolm Pirnie for their assistance on this project.
References
Biswas, P., Lu, C. S., and Clark, R. M. (1993). “A Model for chlorine concentration decay in pipes.” Water Res., 27(12), 1715–1724.
Boccelli, D. L., Tryby, M. E., Uber, J. G., Rossman, L. A., Zierolf, M. L., and Polycarpou, M. M. (1998). “Optimal scheduling of booster disinfection in water distribution systems.” J. Water Resour. Plann. Manage., 124(2), 99–111.
Boccelli, D. L., Tryby, M. E., Uber, J. G., and Summers, R. S. (2003). “A reactive species model for chlorine decay and THM formation under rechlorination conditions.” Water Res., 37(11), 2654–2666.
Bove, F. J., Fulcomer, M. C., Klotz, J. B., Esmart, J., Dufficy, E. M., and Savrin, J. E. (1995). “Public drinking-water contamination and birth outcomes.” Am. J. Epidemiol., 141(9), 850–862.
Clark, R. M., and Sivaganesan, M. (1998). “Predicting chlorine residuals and formation of TTHMs in drinking water.” J. Environ. Eng., 124(12), 1203–1210.
Hallam, N. B., West, J. R., Forster, C. F., Powell, J. C., and Spencer, I. (2002). “The decay of chlorine associated with the pipe wall in water distribution systems.” Water Res., 376(14), 3749–3788.
Krasner, S. W., Mcguire, M. J., Jacangelo, J. G., Patania, N. L., Reagan, K. M., and Aieta, E. M. (1989). “The occurrence of disinfection by-products in United-States drinking-water.” J. Am. Water Works Assoc., 81(8), 41–53.
Morris, R. D., Audet, A. M., and Angelillo, I. F. (1992). “Chlorination, chlorination by-products and cancer: A meta-analysis.” Am. J. Public Health, 82(7), 955.
Nuckols, J. R., Rossman, L. W., and Singer, P. S. (2001). Development of exposure assessment methods for THM and HAA in water distribution systems, American Water Works Association Research Foundation, Denver.
Powell, J. C., Hallam, N. B., West, J. R., Forster, C. F., and Simms, J. (2000a). “Factors which control bulk chlorine decay rates.” Water Res., 34(1), 117–126.
Powell, J. C., West, J. R., Hallam, N. B., Forster, C. F., and Simms, J. (2000b). “Performance of various kinetic models for chlorine decay.” J. Water Resour. Plann. Manage., 126(1), 13–20.
Rossman, L. A. (2000). EPANET 2 users’ manual, EPA/600/R-00/057, U.S.EPA, Cincinnati.
Rossman, L. A., Brown, R. A., Singer, P. C., and Nuckols, J. R. (2001). “DBP formation kinetics in a simulated distribution system.” Water Res., 35(14), 3483–3489.
Rossman, L. A., Clark, R. M., and Grayman, W. M. (1994). “Modeling chlorine residuals in drinking-water distribution-systems.” J. Environ. Eng., 120(4), 803–820.
Shang, F., Uber, J. G., and Rossman, L. A. (2008). EPANET multi-species extenstion users’ manual, EPA/600/S-07/021, U.S. EPA, Cincinnati.
Singer, P. C., et al. (2002). Relative dominance of HAAs and THMs in treated drinking water, American Water Works Association Research Foundation, Denver.
Tryby, M. E., Boccelli, D. L., Koechling, M. T., Uber, J. G., Summers, R. S., and Rossman, L. A. (1999). “Booster chlorination for managing disinfectant residuals.” J. Am. Water Works Assoc., 91(1), 95–108.
Tryby, M. E., Boccelli, D. L., Uber, J. G., and Rossman, L. A. (2002). “Facility location model for booster disinfection of water supply networks.” J. Water Resour. Plann. Manage., 128(5), 322–333.
USEPA. (1998). “National primary drinking water regulations: Disinfectants and disinfection by-products, final rule.” FR 98–32887, Washington, D.C.
USEPA. (2005). “National primary drinking water regulations: Stage 2 disinfectants and disinfection byproducts rule, final rule.” 40 CFR, Parts 9, 141, and 142, Washington, D.C.
Vasconcelos, J. J., et al. (1996). Characterization and modeling of chlorine decay in distribution systems, American Water Works Association Research Foundation, Denver.
Vasconcelos, J. J., Rossman, L. A., Grayman, W. M., Boulos, P. F., and Clark, R. M. (1997). “Kinetics of chlorine decay.” J. Am. Water Works Assoc., 89(7), 54–65.
Waller, K., Swan, S. H., DeLorenze, G., and Hopkins, B. (1998). “Trihalomethanes in drinking water and spontaneous abortion.” Epidemiology, 9(2), 134–140.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Aug 7, 2007
Accepted: Jan 20, 2009
Published online: Sep 15, 2009
Published in print: Oct 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.