In Situ Source Treatment of Using a -Based Reductant Blend: Long-Term Monitoring and Evaluation
Publication: Journal of Environmental Engineering
Volume 134, Issue 8
Abstract
The long-term effectiveness of an reductant solution blend for in situ saturated zone treatment of dissolved and solid phase in a high pH chromite ore processing solid waste fill material was investigated. Two field pilot injection studies were conducted that showed sustained treatment of over evaluation periods of more than 1,000 days. No well or aquifer formation clogging was observed during injection although treatment was limited to the pore volume displacement radius of the injected reductant. Analysis of posttreatment core samples suggested treatment effectiveness of solid phase , whereas lab tests suggested treatment of the solid phase can be complete provided the chromite ore processing solid waste sediments are sufficiently dosed with the reductant. The sustained treatment of dissolved phase migrating through the treatment zones for more than 1,000 days following injection provided strong evidence of a residual treatment capacity having been imparted to the formation solids. Scanning electron microscopy–energy dispersive x-ray spectroscopy analyses of posttreatment core samples indicated that much of the may be removed through the formation of a Cr-bearing precipitate, possibly a complex carbonate, characterized by an molar ratio of roughly 1:1.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to acknowledge the contributions of David Jewett in conducting hydraulic testing at the site; Frank Beck, Patrick Clark, Kyle Jones, and Mark Paddock for assistance in installation and sampling of wells at the site; Shaw Environmental (Ning Xu, Lynda Callaway, Kelley Bates, Ravi Costa, Jarrod Tollett, Brad Scroggins) for analysis of aqueous and solid phase samples, and Daniel Kremser at Battelle for sample characterization via x-ray diffractometry. Additionally, the writers would like to thank Craig Zeller from EPA Region 4 and Tim Nelson from the Macalloy Corporation for their sustained support throughout the course of the study.
References
Amonette, J. E., Szecsody, J. E., Schaef, H. T., Templeton, J. C., Gorby, Y. A., and Fruchter, J. S. (1994). “Abiotic reduction of aquifer materials by dithionite: A promising in situ remediation technology.” Proc., 33rd Hanford Symp. on Health and the Environment—In Situ Remediation: Scientific Basis for Current and Future Technologies, G. W. Gee, N. R. Wing, eds., Battelle Press, Columbus, Ohio, 851–882.
Bond, D. L., and Fendorf, S. (2003). “Kinetics and structural constraints of chromate reduction by green rusts.” Environ. Sci. Technol., 37(12), 2750–2757.
Buerge, I. J., and Hug, S. J. (1997). “Kinetics and pH dependence of chromium(VI) reduction by iron(II).” Environ. Sci. Technol., 31(5), 1426–1432.
de Carvalho, L. M., and Schwedt, G. (2001). “Polarographic determination of dithionite and its decomposition products: Kinetic aspects, stabilizers, and analytical application.” Anal. Chim. Acta, 436(2), 293–300.
Eary, L. E., and Rai, D. (1988). “Chromate removal from aqueous wastes by reduction with ferrous ion.” Environ. Sci. Technol., 22(8), 972–977.
Fruchter, J. S., Cole, C. R., Williams, M. D., Vermeul, V. R., Amonette, J. E., Szecsody, J. E., Istok, J. D., and Humphrey, M. D. (2000). “Creation of a subsurface permeable treatment zone for aqueous chromate contamination using in situ redox manipulation.” Ground Water Monit. Rem., 20(2), 66–77.
Gasana, E., Westbroek, P., Temmerman, E., and Thun, H. P. (1999). “Electrochemical behaviour of sodium dithionite at a platinum electrode and determination of diffusion coefficient in alkaline solution.” Anal. Commun., 36(12), 387–389.
Geelhoed, J. S., Meeussen, J. C. L., Roe, M. J., Hillier, S., Thomas, R. P., Farmer, J. G., and Paterson, E. (2003). “Chromium remediation or release? Effect of iron(II) sulfate addition on chromium(VI) leaching from columns of chromite ore processing residue.” Environ. Sci. Technol., 37(14), 3206–3213.
Göske, J., König, U., and Pöllmann, H. (2004). “Kinetical investigations on lamellar calcium aluminate chromate hydrates with high speed detector.” Mater. Sci. Forum, 443–444, 299–302.
He, T. Y., Chen, C., and Traina, S. J. (2004). “Inhibited reduction by aqueous under hyperalkaline conditions.” Environ. Sci. Technol., 38(21), 5535–5539.
Houben, G. J. (2004). “Modeling the buildup of iron oxide encrustations in wells.” Ground Water, 42(1), 78–82.
Kieber, R. J., and Helz, G. R. (1992). “Indirect photoreduction of aqueous chromium(VI).” Environ. Sci. Technol., 38(1), 307–312.
Knight, B. L. (1973). “Reservoir stability of polymer solutions.” JPT, J. Pet. Technol., 25, 618–626.
Kovacs, K. M., and Rabai, G. (2002). “Mechanism of the oscillatory decomposition of the dithionite ion in a flow reactor.” Chem. Commun. (Cambridge), 2002(7), 790–791.
Lin, C. J. (2002). “The chemical transformations of chromium in natural waters—A model study.” Water, Air, Soil Pollut., 139(1–4), 137–158.
Palmer, C. D., and Puls, R. W. (1994). “Natural attenuation of hexavalent chromium in ground water and soils.” EPA/540/S-94/505, U.S. Environmental Protection Agency, Washington, D.C.
Pettine, M., D’ottone, L., Campanella, L., Millero, F. J., and Passino, R. (1998). “The reduction of chromium (VI) by iron(II) in aqueous solutions.” Geochim. Cosmochim. Acta, 62(9), 1509–1519.
Sass, B. M., and Rai, D. (1987). “Solubility of amorphous chromium(III)-iron(III) hydroxide solid solutions.” Inorg. Chem., 26(14), 2228–2232.
Seaman, J. C., Bertsch, P. M., and Schwallie, L. (1999). “In situ reduction within coarse-textured, oxide-coated soil and aquifer systems using solutions.” Environ. Sci. Technol., 33(6), 938–944.
Sedlak, D. L., and Chan, P. G. (1997). “Reduction of hexavalent chromium by ferrous iron.” Geochim. Cosmochim. Acta, 61(11), 2185–2192.
Stumm, W. (1992). Chemistry of the solid–water interface, Wiley, New York.
Su, C., and Ludwig, R. D. (2005). “Treatment of hexavalent chromium in chromite ore processing solid waste using a mixed reductant solution of ferrous sulfate and sodium dithionite.” Environ. Sci. Technol., 39(16), 6208–6216.
Szecsody, J. E., Fruchter, J. S., Williams, M. D., Vermeul, V. R., and Sklarew, D. (2004). “In situ chemical reduction of aquifer sediments: Enhancement of reactive iron phases and TCE dechlorination.” Environ. Sci. Technol., 38(17), 4656–4663.
Taylor, H. F. W. (1997). Cement chemistry, 2nd Ed., Thomas Telford, London.
Tremaine, J., and Keel, N. L. (1999). “In situ remediation of hexavalent chromium in groundwater: Practical implementation.” Proc., Abiotic In Situ Technologies for Groundwater Remediation Conf. Proc., U.S. Environmental Protection Agency, Washington, D.C., EPA/625/R-99/012, 101–103.
U.S. Environmental Protection Agency (USEPA). (2000). “In situ treatment of soil and groundwater contaminated with chromium.” EPA/625/R-00/005, Washington, D.C.
Wayman, M., and Lem, W. J. (1970). “Decomposition of aqueous dithionite. Part II. A reaction mechanism for the decomposition of aqueous sodium dithionite.” Can. J. Chem., 48(5), 782–787.
Westbroek, P., Govaert, E., Gasana, E., Temmerman, E., and Kiekens, P. (1999). “Possibilities to measure the concentration of sodium dithionite in textile applications by means of amperometric sensors.” AUTEX Res. J., 1(1), ⟨http://www.autexrj.org/No1/old_4.pdf⟩.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Aug 4, 2006
Accepted: Nov 7, 2007
Published online: Aug 1, 2008
Published in print: Aug 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.