Hydraulic Considerations in Geosynthetic and Aggregate Subsurface Drains
Publication: Journal of Environmental Engineering
Volume 133, Issue 9
Abstract
The hydraulic design of certain types of subsurface drains has recently been put on a more rational footing, and deficiencies in earlier design methods have been demonstrated. However, significant limitations remain in hydraulic design methods for geosynthetic and aggregate subsurface drains. It is important to decouple the groundwater hydrology from the internal hydraulics of the drain, and properly design subsurface drains for open-channel rather than pressurized conditions. Present design methods can inadvertently result in pressurized flow. The assumption of uniform flow (Manning’s equation alone) is also improperly made in some present design methods. Consequences can include unintended pressurized flow and attendant nonuniformity of inflow on the one hand and uneconomical design on the other. Current standard guidelines provide relatively little guidance for the design of geosynthetic and aggregate drains. A current ASTM standard, commonly referenced by geosynthetic manufacturers, has significant limitations. Deficiencies and qualifications are identified for present design methods. Guidance is given for the improved design of geosynthetic and aggregate subsurface drains based on sound hydraulic principles.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmed, Z., White, T. D., and Kuczek, T. (1997). “Comparative-field performance of subdrainage systems.” J. Irrig. Drain. Eng., 123(3), 194–201.
ASCE. (2006). “Standard guidelines for the design of urban subsurface drainage.” ASCE/EWRI standard 12-05, Reston, Va.
ASTM. (2003). “Test method for determining the (in-plane) flow rate per unit width and hydraulic transmissivity of a geosynthetic using a constant head.” ASTM designation D4716-03, West Conshohocken, Pa.
Christopher, B. C., and Zhao, A. (2001). Design manual for geocomposite underdrain systems, Tenax Corporation, Baltimore.
Cornish, R. J. (1928). “Flow in pipe of rectangular cross-section.” Proc. R. Soc. London, Ser. A, 120, 691–700.
Davis, S. N., and DeWiest, J. M. (1966). Hydrogeology, Wiley, New York.
Dempsey, B. J. (1988). “Core flow-capacity requirements of geocomposite fin-drain materials used in pavement subdrainage.” Transportation Research Record. 1159, Transportation Research Board, Washington D.C., 21–29.
Federal Highway Administration. (FHwA). (1990). “Highway subdrainage design by microcomputer: (DAMP) Drainage analysis & modeling programs.” FHWA-IP-90-012, Washington, D.C., 84–88, 101–108.
Federal Highway Administration (FHwA). (2002). User’s guide for drainage requirements in pavements—DRIP 2.0 microcomputer program, Washington, D.C., 4-21 to 29, 5-8 to 14.
Forrester, K. (2001). Subsurface drainage for slope stabilization, ASCE, Reston, Va., 130–133.
Graber, S. D. (2004). “Collection conduits including subsurface drains.” J. Environ. Eng., 130(1), 67–80.
Graber, S. D. (2007). “Full-flowing collection conduits with nonuniform inflow.” J. Environ. Eng., 133(6), 575–580.
Harr, M. E. (1962). Groundwater and seepage, McGraw-Hill, New York, 210–226.
Koerner, R. M. (2005). Designing with geosynthetics, Pearson Prentice- Hall, Upper Saddle River, N.J., 29–41, 44–48, 70, 135–138, 165, 166, 263–268, 396–399, 403–408, 412–423, 757–758, 769–773, 776–779.
McEnroe, B. M. (1993). “Maximum saturated depth over landfill liner.” J. Environ. Eng., 119(2), 262–270.
McNown, J. S. (1954). “Mechanics of manifold flow.” Trans. Am. Soc. Civ. Eng., 119, 1103–1142.
National Cooperative Highway Research Program (NCHRP). (2004). Guide for mechanistic-empirical design of new and rehabilitated pavement structures–Appendix TT: Drainage requirement in pavements (DRIP) microcomputer program user’s guide, National Research Council, Washington, D.C.
Rumer, R. R., Jr., and Drinker, P. A. (1966). “Resistance to laminar flow through porous media.” J. Hydr. Div., 92(5), 155–163.
Somerton, C. W., and Wood, P. (1988). “Effect of walls in modeling flow through porous media.” J. Hydraul. Eng., 114(12), 1431–1448.
Stormont, J. C., and Zhou, S. (2005). “Impact of unsaturated flow on pavement edgedrain performance.” J. Transp. Eng., 131(1), 46–53.
Straub, L. G., Silberman, E., and Nelson, H. C. (1958). “Open-channel flow at small Reynolds numbers.” Trans. Am. Soc. Civ. Eng., 123, 685–706, 713,714.
Tan, S.-A., Chew, S.-H., Karunaratne, G.-P., and Wong, S.-F. (2000). “Performance of repaired slope using a GEONET or GEOPIPE drain to lower ground-water table.” Testing and performance of geosynthetics in subsurface drainage, ASTM stock No. STP 1390, West Conshohocken, Pa., 3–14.
Venkataraman, P., and Rao, P. R. M. (1998). “Darcian, transitional, and turbulent flow through porous media.” J. Hydraul. Eng., 124(8), 840–846 [with errata 125(4), 437].
Ward, J. C. (1964). “Turbulent flow in porous media.” J. Hydr. Div., 90(5), 1–12.
Woerner, J. L., Jones, B. A., and Fenzl, R. N. (1968). “Laminar flow in finitely wide rectangular channels.” J. Hydr. Div., 94(3), 691–704.
Woo, D.-C., and Brater, E. F. (1961). “Laminar flow in rough rectangular channels.” J. Geophys. Res., 66(12), 4207–4217.
Yen, B. C. (1992). “Hydraulic resistance in open channels.” Channel flow resistance: Centennial of Manning’s formula, B. C. Yen, ed., Water Resources Publications, Littleton, Colo., 1–135.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 133 • Issue 9 • September 2007
Pages: 869 - 878
Copyright
© 2007 ASCE.
History
Received: Aug 17, 2006
Accepted: Mar 14, 2007
Published online: Sep 1, 2007
Published in print: Sep 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.