Use of a Sequencing Batch Reactor for Nitrogen and Phosphorus Removal from Municipal Wastewater
Publication: Journal of Environmental Engineering
Volume 131, Issue 5
Abstract
In this study, a suspended growth sequencing batch reactor (SBR) and an attached cum suspended growth SBR were used to investigate the performance characteristics of nitrogen and phosphorus (NP) removal from municipal sewage. The effects of three controlling factors, namely batch loading rate, feed pattern (initial feed or step feed), and mixing/aeration ratio, on NP removal were investigated under nine different experimental conditions. Owing to a large number of possible combinations among the controlling factors and different experimental conditions, it is very difficult to enumerate all the available combinations experimentally. In view of this, the Taguchi method, a cost-effective technique for design of experiments, was exploited for estimating the optimal operating condition. This study also evaluated the difference between the suspended growth SBR and the attached cum suspended growth SBR. The total nitrogen (TN), total phosphorus (TP), total biochemical oxygen demand , and suspended solids (SS) removal efficiencies were 90.2, 83.9, 98.6, and 93.0%, respectively, for the suspended growth SBR. The corresponding values for the attached cum suspended growth SBR were 92.6, 82.1, 98.3, and 93.1%, respectively. It was observed that the batch loading rate influenced the efficiencies in terms of TN removal. It was also noted that step feed and mixing/aeration ratio had significant impact on TP removal performance. The optimal operating condition for the suspended growth SBR system in terms of batch loading rate, feed pattern, and mixing/aeration ratio were , initial feed, and 1-to-1, respectively. The associated TN, TP, , and SS removal efficiencies for the suspended growth SBR were 93.8, 98.2, 99.6, and 98.5%, respectively. The corresponding results for the attached cum suspended growth SBR system were , initial feed, and 3-to-1, respectively. Similarly, the corresponding removal efficiencies for the attached cum suspended growth SBR were 94.7, 97.8, 99.3, and 98.8%, respectively.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alleman, J. E., and Irvine, R. L. (1980). “Storage-induced denitrification using sequencing batch reactor operation.” Water Res., 14, 1483–1488.
American Public Health Association/American Water Works Association/Water Pollution Control Federation (APHA/AWWA/WPCF). (1995). Standard methods for the examination of water and wastewater, 19th Ed., APHA, Washington, D.C.
Fang, H. H. P., and Ling, J. W. C. (1995). “Removal of nitrogen and phosphorus in batch reactors with fibrous packing.” Bioresour. Technol., 53, 141–145.
Hayakawa, N., Inami, S., Kusunoki, T., Tsuji, J., and Hamamoto, Y. (1981). “Wastewater treatment by a sequencing batch reactor activated sludge process with continuous inflow—A full scale plant study.” Yotii Haisui, 24, 28–38 (in Japanese).
Irvine, R. L., Ketchum, L. H., Arora, M. L., and Barth, E. F. (1985). “An organic loading study of full-scale sequencing batch reactors.” J. Water Pollut. Control Fed., 57(8), 847–853.
Manning, J. F., and Irivine, R. L. (1985). “The biological removal of phosphorus in a sequencing batch reactor.” J. Water Pollut. Control Fed., 51(1), 87–94.
Ng, W. J., Ong, S. L., and Hu, J. Y. (2001). “Denitrifying phosphorus removal by anaerobic/anoxic sequencing batch reactor.” Water Sci. Technol., 43(3), 139–146.
Ohashi, A., et al. (1995). “Influence of substrate ratio on the structure of multi-species biofilms consisting of nitrifiers and heterotrophs.” Water Sci. Technol., 32(8), 75–84.
Peace, G. S. (1993). Taguchi methods—A hands-on approach, Addison-Wesley, Boston.
Sedlak, R. I. (1991). Phosphorus and nitrogen removal from municipal wastewater: Principles and practice, 2nd Ed., Lewis, Boca Raton, Fla.
Wilderer, P. A. (1992). “Sequencing batch biofilm reactor technology.” Harnessing biotechnology for the 21st century, M. R. Ladisch and A. Bose, eds., American Chemical Society, Washington, D.C., 475–479.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 131 • Issue 5 • May 2005
Pages: 734 - 744
Copyright
© 2005 ASCE.
History
Received: Jun 25, 2002
Accepted: Apr 26, 2004
Published online: May 1, 2005
Published in print: May 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.