Estimation of Polyethylene Oxide Polymer Train and Loop Densities on Contaminant Barrier Materials
Publication: Journal of Environmental Engineering
Volume 130, Issue 8
Abstract
Desiccation of exposed clayey materials in cover layers of waste containment systems can ultimately result in the development of cracks that can promote the infiltration of rainwater and/or snowmelt, and escape of gases from buried wastes. Clayey barriers can be stabilized against desiccation by introducing binders such as concentrated polymer liquids or aqueous solutions. In this research, a theoretical analysis of the morphological configuration of molecules of polyethylene oxide (PEO) on montmorillonite (a common barrier mineral) was performed. A methodology for estimating polymer train and loop densities using batch sorption measurements was developed and demonstrated using PEO sorption test data for sodium montmorillonite (specific surface area: 31.82±0.22 m2/g) at initial aqueous PEO (molecular weight 8,000,000) concentrations of 0, 0.5, 1.0, 2.0, and 4.0 g/L. From test data, the distribution coefficient of PEO was determined to be 0.1599 mL/g. The analyses indicate that the distribution of sorbed PEO molecules into trains and loops is very sensitive to PEO chain flexibility. For example, for a function of partition function (λ) value of 0.1, the numbers of PEO molecular trains on 1 g of sodium montmorillonite are estimated to be and for chain flexibilities of 0.2 and 0.8, respectively. The greater the chain flexibility, the greater the opportunity for polymer molecules to lie flat on clay particles. Within an initial PEO concentration range of 0–4.0 g/L, no significant dependence of sorbed polymer molecular configuration on initial concentration was found. Possibly, extension of sorbed polymer molecular loops into barrier soil pores narrows fluid flow channels and hence the desiccation rate. This research enhances understanding of the physico-chemical processes that underlie clay stabilization by aqueous polymers.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aranda, P., and Ruiz-Hitzky, E.(1992). “Poly (ethylene oxide)—Silicate intercalation materials.” Chem. Mater., 4(6), 1395–1403.
Bae, S., and Inyang, H. I.(2001). “Effects of various polyethylenimine solutions on desiccation of Na-montmorillonite.” Soil Sediment Contam.,10, 675–685.
Bae, S., Inyang, H. I., and de Brito Galvão, T. C. (2002). “Physico-chemical interactions of kaolinite with polyethylene oxide polymer solutions.” Proc., 6th Int. Symp. on Environmental Geotechnology and Global Sustainable Development, Seoul, Republic of Korea, 243–254.
Balazs, A. C.(1996). “Capturing the dynamic behavior of adsorbed polymers.” Science, 274, 2036–2037.
Bohmer, M. R., Hoogsteen, W., and Belder, G. F. (1999). “Role of polymers in particle adhesion and thin particle layers.” Colloid-polymer interactions, R. S. Farinato and P. Dubin, eds., Wiley, New York, 101–124.
Chen, T., Maltesh, C., and Somasundaran, P. (1998). “Effect of solids concentration on polymer adsorption and conformation.” Water soluble polymers: Solution properties and applications, Z. Amjad, ed., Plenum, New York, 23–30.
Daniels, J. L., and Inyang, H. I.(2003). “Durability of Boston Blue Clay in waste containment applications.” J. Mater. Civ. Eng., 15(2), 144–152.
Daniels, J. L., Inyang, H. I., and Kurup, P. (2002). “The influence of dissolved polymers on the properties of earthen barriers used in waste containment applications.” Proc., 6th Int. Symp. on Environmental Geotechnology and Global Sustainable Development, Seoul, Republic of Korea, 363–370.
Fleer, G. J., and Lyklema, J. (1983). “Adsorption of polymers.” Adsorption from solution at the solid/liquid interface, G. D. Parfitt and C. H. Rochester, eds., Academic, Orlando, Fla., 155–220.
Forsman, W. C., and Hughes, R. E.(1963). “Configurational properties of random-flight chains in solution and in an interface.” J. Chem. Phys., 38(9), 2123–2129.
Garvey, M. J., Tadros, Th. F., and Vincent, B.(1976). “A comparison of the adsorbed layer thickness obtained by several techniques of various molecular weight fractions of poly (vinyl alcohol) on aqueous polystyrene latex particles.” J. Colloid Interface Sci., 55, 440–453.
Hoeve, C. A. J.(1970). “On the general theory of polymer adsorption at a surface.” J. Polym. Sci., Part C: Polym. Symp., 30, 361–367.
Hoeve, C. A. J.(1971). “Theory of polymer adsorption at interfaces.” J. Polym. Sci., Part C: Polym. Symp., 34, 1–10.
Hoeve, C. A. J.(1977). “On the theory of polymer adsorption at an interface.” J. Polym. Sci., Polym. Symp., 61, 389–399.
Hoeve, C. A. J., DiMarzio, E. A., and Peyser, P.(1965). “Adsorption of polymer molecules at low surface coverage.” J. Chem. Phys., 42, 2558–2563.
Inyang, H. I., and Bae, S. (2002). “Aqueous polyvinyl alcohol loss from desiccating sodium montmorillonite: Implications in dust control during mining operations.” Proc., 7th Int. Conf. on Environmental Issues and Waste Management in Energy and Mineral Production, Cagliari, Italy, 347–352.
Inyang, H. I., Daniels, J. L., and Chien, C. C. (2000). “Methods of analysis of contaminant migration in barrier materials.” Remediation of hazardous waste contaminated soils, 2nd Ed., D. L. Wise, D. J. Trantolo, W. J. Cichon, H. I. Inyang, and U. Stottmeister, eds., Marcell Dekker, New York, 63–82.
Inyang, H. I., Iskandar, A., and Parikh, J. M. (1997). “Physico-chemical interactions in waste containment barriers.” Encyclopedia of environmental analysis and remediation, Vol. 2, Wiley, New York, 1158–1165.
Inyang, H. I., and Tumay, M. T. (1995). “Containment systems for contaminants in the subsurface.” Encyclopedia of environmental control technology, Gulf Publishing, New York, 175–215.
Kargbo, D. M., Fanning, D. S., Inyang, H. I., and Duell, R. W.(1993). “The environmental significance of acid sulphate clays as waste covers.” Environ. Geol., (22), 218–226.
Khoultchaev, K. K., Kerekes, R. J., and Englezos, P.(1997). “Temperature-dependent behavior of polyethylene oxide in papermaking suspensions.” J. Am. Inst. Chem. Eng.,43(9), 2353–2358.
Magdassi, S., and Rodel, B.-Z.(1996). “Flocculation of montmorillonite dispersions based on surfactant-polymer interactions.” Colloids Surf., A, 119, 51–56.
Motomura, K., and Matuura, R.(1969). “Conformation of adsorbed polymeric chain II.” J. Chem. Phys., 50, 1281–1287.
Podoll, R. T., Irwin, K. C., and Brendlinger, S.(1987). “Sorption of water-soluble oligomers on sediments.” Environ. Sci. Technol., 21(6), 562–568.
Reddi, L. N., and Inyang, H. I. (2000). Geoenvironmental engineering: principles and applications, Marcell Dekker, New York.
Rubio, J., and Kitchener, J. A.(1976). “The mechanism of adsorption of poly (ethylene oxide) flocculant on silica.” J. Colloid Interface Sci., 57(1), 132–142.
Schamp, N. V., and Huylebroeck, J.(1973). “Adsorption of polymers on clays.” J. Polym. Sci., Polym. Symp., 42, 553–562.
Silberberg, A.(1962). “The adsorption of flexible molecules. Part II. The shape of the adsorbed molecule; The adsorption isotherm surface tension and pressure.” J. Phys. Chem., 66, 1884–1907.
Silberberg, A.(1967). “Adsorption of flexible macromolecules. III. Generalized treatment of the isolated macromolecule; The effect of self-exclusion.” J. Chem. Phys., 46, 1105–1114.
Smith, G. D., Bedrov, D., and Borodin, O.(2000). “Conformations and chain dimensions of poly (ethylene oxide) in aqueous solution: a molecular dynamics simulation study.” J. Am. Chem. Soc., 122(39), 9548–9549.
Wennerstrom, H. (1997). “Polymers.” Fundamentals of interfacial engineering, R. J. Stokes and D. Fennell Evans, eds., Chap. 6, Wiley-VHC, New York, 271–367.
Yerushalmi-Rozen, R., and Klein, J. (1995). “Polymer brushes paint a stable picture.” Phys. World, August, 30–35.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jun 17, 2003
Accepted: Jun 18, 2003
Published online: Jul 15, 2004
Published in print: Aug 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.