Recovery of EDTA from Power Plant Boiler Chemical Cleaning Wastewater
Publication: Journal of Environmental Engineering
Volume 126, Issue 10
Abstract
The deposition of iron oxides, metallic copper, and other impurities on boiler tube surfaces causes loss of heat transfer efficiency at electrical power plants. Hence, the tubes are cleaned every 3–5 years in order to restore the heat transfer efficiency. Chelating agents, mainly ethylenediaminetetraacetate (EDTA) and its salts, have been extensively used for the removal of metal deposits from the boiler tube surfaces. Consequently, the boiler chemical cleaning wastewater (BCCW) contains large amounts of iron, copper, and chelating agents. An electrochemical reduction process that reduces metal ions to their elemental state is tested and evaluated in order to provide the potential option to recover EDTA for reuse from power plant BCCW. Results from controlled direct current electrolysis experiments show that the electroreduction process can successfully remove metal ions from the synthetic solution and field BCCW samples and can deposit elemental metals on the cathodic plate. At a current density of 15.5 mA/cm2 and a temperature of 40°C, the percentage metal removal and current efficiency were 94.16 and 8.27%, respectively, with a cadmium cathodic plate. Moreover, results also indicate that the percentage of metal removal and overall current efficiency increase with increasing current density and temperature under the optimal condition (15.5 mA/cm2 and 40°C). The electroreduction process is able to separate metal ions from their EDTA complexes. The free EDTA can be recovered from field power plant BCCW and be reused again as cleaning agent.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, H. E., and Chen, P. H. ( 1993). “Remediation of metal contaminated soil by EDTA incorporating electrochemical recovery of metal and EDTA.” Envir. Progress, 12(4), 284–293.
2.
American Public Health Association (APHA), American Water Works Association (AWWA), and Water Pollution Control Federation (WPCF). ( 1992). Standard methods for the examination of water and wastewater. 18th Ed., American Public Health Association, Washington, D.C.
3.
Bard, A. J., and Faulkner, L. R. ( 1980). Electrochemical methods fundamentals and applications, Wiley, New York.
4.
Bard, A. J., Parson, R., and Jordon, J. ( 1985). Standard potentials in aqueous solution, Marcel Dekker, New York.
5.
Bergers, P. J. M., and Groot, A. C. ( 1994). “The analysis of EDTA in water by HPLC.” Water Res., 28(3), 639–642.
6.
Dahmen, E. A. M. F. ( 1986). Electroanalysis: Theory and application in aqueous and non-aqueous media and in automated chemical control, Elsevier Science, New York.
7.
Dwyer, F. P., and Mellor, D. P. ( 1964). Chelating agents and metal chelates, Academic, New York.
8.
Flaschka, H. A. ( 1959). EDTA titration, Pergamon, N.Y.
9.
Gaudy, A. F., and Gaudy, E. ( 1980). Microbiology for environmental engineers and scientists, McGraw-Hill, New York.
10.
Hine, F. ( 1985). Electrode processed and electrochemical engineering, Plenum, New York.
11.
Holcombe, L. J., Behrens, G. P., and Micheletti, W. C. ( 1987). “Methods for removal of copper and iron from boiler chemical cleaning wastes.” Envir., Progress, 6(2), 74–81.
12.
Huang, C. P., and Hsu, M. ( 1997). “Recovery of EDTA from power plant boiler chemical cleaning wastewater.” CBWP-MANTA-TR97-7, Chesapeake Bay and Watershed Programs, Monitoring and Non-Tidal Assessment.
13.
Levich, V. G. ( 1962). Physicochemical hydrodynamics, Prentice-Hall, Englewood Cliffs, N.J.
14.
Margulova, T. K. ( 1989). “Current problem of chelating agent water treatment at thermal and nuclear power stations.” Thermal Engrg., 36(11), 608–613.
15.
Parthasaradhy, N. V. ( 1988). Practical electroplating handbook, Prentice-Hall, Englewood, N.J.
16.
Pribil, R. ( 1972). Analytical applications of EDTA and related compounds, Pergamon, New York.
17.
Raub, E., and Muller, K. ( 1967). Fundamentals of metal deposition, Elsevier Science, New York.
18.
Skoog, D. A., and Leary, J. J. ( 1992). Principles of instrumental analysis, Saunders College Publishing, Philadelphia.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 126 • Issue 10 • October 2000
Pages: 919 - 924
History
Received: Mar 18, 1999
Published online: Oct 1, 2000
Published in print: Oct 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.