Analytical Determination of Pollutant Wash-Off Parameters
Publication: Journal of Environmental Engineering
Volume 125, Issue 10
Abstract
The wash-off algorithm in the Storm Water Management Model has been widely used to simulate the wash off of sediment and pollutants from impervious areas. This algorithm indicates an exponential relationship between pollutant wash off and runoff volume. To simulate water quality, the initial mass of sediment or pollutant at the beginning of the storm and an empirical wash-off coefficient need to be determined. A simple analytical technique is developed for evaluating these parameters from measured water quality and runoff data. The proposed method is based on an expression of the exponential wash-off equation in terms of concentration rather than pollutant mass, and it can be applied to parameter evaluation without recourse to complex numerical models or optimization techniques.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alley, W. M. (1981). “Estimation of impervious-area wash-off parameters.” Water Resour. Res., 17(4), 1161–1166.
2.
Alley, W. M., and Smith, P. E. (1981). “Estimation of accumulation parameters for urban runoff quality modeling.” Water Resour. Res., 17(6), 1657–1664.
3.
Hardee, J., Miller, R. A., and Mattraw, Jr., H. C. (1979). “Stormwater-runoff data for a multifamily residential area, Dade County, Florida.” Open-File Rep., 79-1295, U.S. Geological Survey, Tallahassee, Fla.
4.
Haster, T. W., and James, W. P. (1994). “Predicting sediment yield in storm-water runoff from urban areas.”J. Water Resour. Plng. and Mgmt., ASCE, 120(5), 630–650.
5.
Huber, W. C., and Dickinson, R. E. (1988). “Storm water management model (SWMM), version 4, user's manual.” Rep. EPA/600/3-88/001a (NTIS PB-88-236641/AS), Environmental Protection Agency, Athens, Ga.
6.
Jewell, T. K., Adrian, D. D., and Nunno, T. J. (1978). “Methodology for calibrating stormwater models.”J. Envir. Engrg. Div., ASCE, 104(3), 485–501.
7.
Metcalf and Eddy Inc., University of Florida, and Water Resources Engineers Inc. (1971). “Storm Water Management Model, volume 1: final report.” EPA Rep. 11024 DOC 07-71, (NTIS PB-203289), Environmental Protection Agency, Washington, D.C.
8.
Nakamura, E. (1984). “Factors affecting stormwater quality decay coefficient.” Proc., 3rd Int. Conf. on Urban Storm Drainage, P. Balmer, P.-A. Malmkvist, and A. Sjoberg, eds., Goteborg, Sweden, 3, 979–988.
9.
Sartor, J. D., and Boyd, G. B. (1972). “Water pollution aspects of street surface contaminants.” Rep. EPA-R2-72-081 (NTIS PB-214408), U.S. Environmental Protection Agency, Washington, D.C.
10.
Sonnen, M. B. (1980). “Urban runoff quality: information needs.”J. Tech. Councils, ASCE, 106(1), 29–40.
11.
U.S. Army Corps of Engineers (USACE). (1977). “Storage, treatment, overflow, runoff model (STORM): user's manual.” Rep. NTIS AD-A955-817, Hydrologic Engineering Center, Davis, Calif.
Information & Authors
Information
Published In
History
Published online: Oct 1, 1999
Published in print: Oct 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.