Materials Balance for Municipal Solid-Waste Management
Publication: Journal of Environmental Engineering
Volume 124, Issue 1
Abstract
A spreadsheet model MSWFLOW was developed as an accounting procedure for determining impacts of management decisions on the physical scale and productive outputs of a municipal solid-waste system. The model tracks the disposition of 50 different waste products and includes source reduction, recovery (recycling and composting), waste-to-energy (WTE) combustion, and landfilling. Outputs from the calculations include mass and volume of waste generated, collected, and diverted by source reduction or recovery; physical scale (daily mass and/or volume) of the recovery and combustion facilities; landfilled mass and associated volume requirement; potential (maximum) annual landfill gas production; and net electrical power production from the combustion facility. The spreadsheet was demonstrated by evaluations of several alternative management strategies for municipal solid waste from a typical U.S. city with a population of 100,000.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Biocycle Editorial Staff. (1990). The biocycle guide to collecting, processing and marketing of recyclables. The JG Press, Inc., Emmaus, Pa.
2.
CalRecovery, Inc. (1993). Handbook of solid waste properties. Governmental Advisory Associates, Inc., New York, N.Y.
3.
Chang, N.-B., Schuler, R. E., and Shoemaker, C. A.(1993). “Environmental and economic optimization of an integrated solid waste management system.”J. Resour. Mgmt. and Technol., 21(2), 87–100.
4.
Chang, N.-B., Yang, Y. C., and Wang, S. F.(1996). “Solid-waste management system analysis with noise control and traffic congestion limitations.”J. Envir. Engrg., ASCE, 122(2), 122–131.
5.
Charles, M. A., and Kiser, J. V. L. (1995). “Waste-to-energy: benefits beyond waste disposal.”Solid waste technologies 1995 industry source book. Adams/Green Industry Publishing, Cathedral City, Calif., 12–14.
6.
Everett, J. W., and Modak, A. R.(1996). “Optimal regional scheduling of solid waste systems. I. Model development.”J. Envir. Engrg., 122(9), 785–792.
7.
Hilts, M. E.(1994). “Searching for model recycling facilities: paradigms for the `90s and beyond.”Solid Waste Technol., 8(5), 22–32.
8.
MacDonald, M. L.(1996). “Solid waste management models: a state of the art review.”J. Solid Waste Technol. and Mgmt., 23(2), 73–83.
9.
McBean, E. A., Rovers, F. A., and Farquhar, G. F. (1995). Solid waste landfill engineering and design. Prentice-Hall, Inc., Englewood Cliffs, N.J.
10.
Modak, A. R., and Everett, J. W.(1996). “Optimal regional scheduling of solid waste systems. II. Model solutions.”J. Envir. Engrg., 122(9), 793–799.
11.
Niessen, W. R. (1977). “Properties of waste materials.”Handbook of solid waste management, D. G. Wilson, ed., Van Nostrand Reinhold, New York. N.Y., 10–62.
12.
Office of Solid Waste and Emergency Response (OSWER). (1992). “Characterization of municipal solid waste in the United States: 1992 update.”Rep. No. EPA/530-R-92-019, U.S. Environmental Protection Agency, Washington, D.C.
13.
Office of Solid Waste and Emergency Response (OSWER). (1994). “Characterization of municipal solid waste in the United States: 1994 update. “Rep. No. EPA530-R-94-042, U.S. Environmental Protection Agency, Washington, D.C.
14.
Office of Solid Waste and Emergency Response (OSWER). (1996). “Characterization of municipal solid waste in the United States: 1995 update.”Rep. No. EPA530-R-96-001, U.S. Environmental Protection Agency, Washington, D.C.
15.
Recycling insights. (1994). SWPlan for Windows. CPM, Inc., Shakopee, Minn.
16.
Rich, L. G. (1973). Environmental systems engineering. McGraw-Hill, Inc., New York, N.Y.
17.
Schade, B. F. (1989). “Solid waste management in Oklahoma, an economic analysis,” MS dissertation, University of Oklahoma, Norman, Okla.
18.
Solid Waste Technologies Staff.(1995). “In search of North America's best recycling centers.”Solid Waste Technol., 9(5), 16–23.
19.
Tchobanoglous, G., Theisen, H., and Vigil, S. (1993). Integrated solid waste management. McGraw-Hill, Inc., New York, N.Y.
20.
WastePlan. (1994). Tellus Institute, Boston, Mass.
21.
Wilson, D. L.(1972). “Prediction of heat of combustion of solid wastes from ultimate analysis.”Envir. Sci. and Technol., 6(13), 1119.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Jan 1, 1998
Published in print: Jan 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.