Defining Biosolids Stability
Publication: Journal of Environmental Engineering
Volume 123, Issue 12
Abstract
The test methods, criteria, and approaches used for stability assessment of biosolids produced by composting, alkaline stabilization, heat drying, and digestion technologies have been reviewed in a recently completed study sponsored by the Water Environment Research Foundation (WERF), and are summarized in this paper. It was concluded that no one method is suitable for assessing stability for all types of biosolids. Stability assessment depends on the process used to manufacture the product, and intended use of the biosolids. A matrix based on use and technology was developed as an approach for biosolids stability assessment. A table was presented that summarizes the current state of practice. Tests were recommended as the most useful methods of stability assessment, at the present time, for each of the stabilization technologies examined. While there is an increasing recognition of the importance of stability assessment for beneficial use of biosolids, there is a lag in the practical use of stability assessment. Research needs were presented for further implementation of biosolids stability assessment.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Brinton, W. F. Jr., Evans, E., Droffner, M. L., and Brinton, R. B.(1995). “Standardized test for evaluation of compost self heating.”Biocycle, 36(11), 64–69.
2.
Bruce, A. M. (1984). “Assessment of sludge stability.”Methods of characterization of sewage sludge, T. J. Casey, ed., Reidel, Dordrecht, The Netherlands, 131–143.
3.
Bruce, A. M., and Fisher, W. J. (1984). “Sludge stabilization-methods and measurements.”Sewage sludge stabilization and disinfection, A. M. Bruce, ed., Ellis Horwood, Ltd., Chichester, United Kingdom.
4.
Burnham, J. C., Hatfield, N., Bennett, G. F., and Logan, T. J. (1992). “Use of quicklime and cement or lime kiln dust for municipal sludge pasteurization and stabilization with the N-Viro soil process.”ASTM special technical publication no. 1135, D. D. Walker, ed., ASTM, West Conshohocken, Pa, 128–141.
5.
Coalition of Northeastern Governors (CONEG) Source Reduction Task Force. (1996). “Model procurement guidelines for source-separated compost.”Final Rep., Washington, D.C.
6.
Composting Council. (1995). Compost stability and growth response: Interim limits and verification protocols. Alexandria, Va. (preliminary draft Jan. 24, 1995).
7.
Epstein, E. (1997). Science of composting. Technomic Publishing Co. Inc., Lancaster, Pa.
8.
Federal Register. (1995). 40CFR Parts 403 and 503, 60(No. 206; Oct. 25).
9.
Hartenstein, R.(1981). “Sludge decomposition and stabilization.”Science, 212, 743–749.
10.
Inbar, Y., Chen, Y., Hadar, Y., and Hoitink, H. A. J.(1990). “New approaches to compost maturity.”Biocycle, 31(12), 64–69.
11.
Jeris, J. S., Ciarcia, D., Chen, E., and Mena, K. (1985). “Determining the stability of treated municipal sludges.”EPA 600/2-85-001, Final rep. prepared for U.S. EPA, Cincinnati, Ohio.
12.
Jiménez, E. I. and Garcia(1989). “Evaluation of city refuse compost maturity: A review.”Biological Wastes, 27(2), 115–142.
13.
Krishnamoorthy, R. (1987). “Evaluation of parameters to measure sludge aerobic stabilization,” PhD thesis, Dept. of Agr. Engrg., Cornell Univ., Ithaca, N.Y.
14.
Logan, T. J., Pierzynski, G. M., and Pepperman, R. (1995a). “National markets for organic products including biosolids: Opportunities, competition and constraints.” Paper presented at the 4th Joint WEF and AWWA Conf. Biosolids and Residuals Mgmt., Kansas City, Mo, July.
15.
Logan, T. J., Harrison, B. J., Goins, L. E., and Hatfield, N.(1995b). “Soil substitute from alkaline stabilization.”Biocycle, 36(9), 80.
16.
Mathur, S. P., Owen, G., Dinel, H., and Schnitzer, M.(1993). “Determination of compost biomaturity. I. Literature review.”Biological Agriculture and Horticulture, 10, 65–85.
17.
Switzenbaum, M. S., Moss, L. H., Epstein, E., Pincince, A. B., and Donovan, J .F. (1997). “Defining biosolids stability: a basis for public and regulatory acceptance.”Final rep. submitted to Water Environment Research Foundation, Alexandria, Va.
18.
U.S. EPA. (1993). Standards for the use or disposal of sewage sludge. 40 CFR Part 503, 58 FR 9248, Feb. 19.
19.
Vesilind, P. A. (1979). Treatment and disposal of wastewater sludges. Ann Arbor Science, Ann Arbor, Mich.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 123 • Issue 12 • December 1997
Pages: 1178 - 1184
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Dec 1, 1997
Published in print: Dec 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.