Attachment Strength of Zebra Mussels on Natural, Polymeric, and Metallic Materials
Publication: Journal of Environmental Engineering
Volume 122, Issue 2
Abstract
Zebra mussel ( Dreissena polymorpha and D. bugensis ) fouling has increased operating and maintenance costs for marine and industrial facilities. An understanding of zebra mussel attachment strength on various substrates of different surface roughness is useful for the development of control strategies. Mussel attachment strength was inferred directly through tensile loading experiments using a calibrated force scale, and indirectly through fluid detachment using a wall jet. The results of both techniques were consistent and yielded statistically significant differences for different substrate types (natural ≥ metallic > polymeric). Attachment varied significantly with material ( P < 0.01) and with surface roughness within a material ( P < 0.05). The lowest attachment strengths were measured on (in increasing order of attachment strength) smooth polytetrafluoroethylene, polymethylmethacrylate, and aluminum. The strongest attachment was measured on rough limestone/dolomite cobble, and mild steel of all roughnesses. Zebra mussel attachment strength was intermediate on, marine concrete, marine plywood, polyvinylchloride, stainless steel, and coal tar epoxy coated mild steel. These results provide preliminary design guidelines for the control of zebra mussels.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ackerman, J. D. (1993). “Preliminary observations of the hydrodynamics of filter feeding in zebra mussels.”Bivalve filter feeders in estuarine and coastal ecosystem processes. R. F. Dame, ed., Springer-Verlag, Berlin, 513–514.
2.
Ackerman, J. D., Ethier, C. R., Allen, D. G., and Spelt, J. K.(1992). “Investigation of zebra mussel adhesion strength using a rotating disk.”J. Envir. Engrg., ASCE, 118(5), 708–724.
3.
Ackerman, J. D., Ethier, C. R., Allen, D. G., and Spelt, J. K. (1993). “The biomechanics of byssal adhesion in Dreissena polymorpha .”Zebra mussels: biology, impact, and control, T. F. Nalepa and D. W. Schloesser, eds., Lewis Press, Boca Raton, Fla., 265–282.
4.
Ackerman, J. D., Sim, B., Nichols, S. J., and Claudi, R. (1994a). “A review of the early life history of zebra mussels ( Dreissena polymorpha ): Comparisons with marine bivalves.”Can. J. Zoology, 72, 1169–1179.
5.
Ackerman, J. D., Wong, L., Ethier, C. R., Allen, D. G., and Spelt, J. K.(1994b). “Preston-Static tubes for the measurement of wall shear stress.”J. Fluids Engrg., 116, 645–649.
6.
Ackerman, J. D., Cottrell, C. M., Ethier, C. R., Allen, D. G., and Spelt, J. K.(1995). “A wall jet to measure the attachment strength in zebra mussels.”Can. J. Fish. Aquat. Sci., 52, 126–135.
7.
Baier, R. E., Gucinski, H., Olivieri, M. P., and Meyer, A. E. (1992). “Rapid underwater bond formation and adhesion of zebra mussel attachment disc protein.”Proc. 6th Int. Symp. Struct. Adhesives Bondings, American Preparedness Association, Washington, D.C., 1–9.
8.
Claudi, R., and Ackerman, J. D. (1992). “Post-settlement movements of juvenile zebra mussels and their potential impact on plant systems.”Corrosion '92. N.A.C.E., Houston, Tex., 341/1–6.
9.
Claudi, R., and Mackie, G. L. (1994). Practical manual for zebra mussel monitoring and control . Lewis Press, Boca Raton, Fla.
10.
Crisp, D. J., Walker, G., Young, G. A., and Yule, A. B.(1985). “Adhesion and substrate choice in mussels and barnacles.”J. Colloid. Interface Sci., 104, 40–50.
11.
Domm, S., McCauley, R. W., Kott, E., and Ackerman, J. D.(1993). “Physiological and taxonomic separation of two Dreissenid mussels in the Laurentian Great Lakes.”Can. J. Fish. Aquatic Sci., 50, 2294–2297.
12.
Eckroat, L. R., Masteller, E. C., Shaffer, J. C., and Steel, L. M. (1993). “The byssus of the zebra mussel ( Dreissena polymorpha ): Morphology, byssal thread formation, and detachment.”Zebra mussels: biology, impact, and control. T. F. Nalepa and D. W. Schloesser, eds., Lewis Press, Boca Raton, Fla., 239–263.
13.
Efird, K. D.(1976). “The inter-relation of corrosion and fouling for metals in sea water.”Mat. Perf., 15, 16–25.
14.
Fisher, E. C., Castelli, V. J., Rodgers, S. D., and Bleile, H. R. (1984). “Technology for control of marine biofouling—a review.”Marine biodeterioration: an interdisciplinary study. J. D. Costlow and R. C. Tipper, eds., Naval Institute Press, Annapolis, Md., 261–298.
15.
Kilgour, B. W., and Mackie, G. L. (1993). “Colonization of different construction materials by the zebra mussel ( Dreissena polymorpha ).”Zebra mussels: biology, impact, and control. T. F. Nalepa and D. W. Schloesser, eds., Lewis Press, Boca Raton, Fla., 167–173.
16.
Kinloch, A. J. (1987). Adhesion and adhesives—science and technology . Chapman and Hall, London, U.K.
17.
Ludyanskiy, M., MacNeill, D., and McDonald, D. (1993). “Zebra mussel ( Dreissena polymorpha ): impact of a bivalve invader.”Biosci., 43, 533–544.
18.
Mackie, G. L. (1991). “Biology of the exotic zebra mussel, Dreissena polymorpha, in relation to native bivalves and its potential impact in Lake St. Clair.”Hydrobiologia, 219, 251–268.
19.
May, B., and Marsden, J. E.(1992). “Genetic identification and implications of another invasive species of Dressenid mussel in the Great Lakes.”Can. J. Fish. Aquat. Sci., 49, 1501–1506.
20.
Mihm, J. W., and Loeb, G. (1992). “Wettability as a surface signal for sessile aquatic organisms.”Modern approaches to wettability: theory and applications. M. E. Schrader and G. Loeb, eds., Plenum Press, New York, N.Y., 263–278.
21.
Nalepa, T. F., and Schloesser, D. W. (1993). Zebra mussels: biology, impact, and control . Lewis Press, Boca Raton, Fla.
22.
National Sanitation Foundation. (1992). PPI-PVC range formulae . National Sanitation Foundation, Ann Arbor, Mich.
23.
Pennak, R. W. (1989). Freshwater invertebrates of the United States, protozoa to mollusca, 3rd Ed., John Wiley, New York, N.Y.
24.
Pillai, A. G. G., and Ravindran, K. (1988). “Crevice corrosion in seawater of aluminum alloys under fouling deposits.”Marine Biodeterioration. M.-F. Thompson, R. Sarojini, and R. Nagabhushanam, eds., Oxford and IBH Publishing, New Delhi, India, 739–746.
25.
Raju, G. J. V. J., Rao, K. S., and Viswanadham, B. (1988). “Recruitment of the fouling bivalve, Mytilopsis sallei (Recluz), on metallic and nonmetallic surfaces at Visakhapatnam Harbor, India.”Marine Biodeterioration. M.-F. Thompson, R. Sarojini, and R. Nagabhushanam, eds., Oxford and IBH Publishing, New Delhi, India, 513–525.
26.
Reeders, H. H., by de Vaate, A., and Slim, F. J. (1989). “The infiltration of Dreissena polymorpha (Bivalvia) in three Dutch lakes with reference to biological water quality management.”Freshwater Biol., 22, 133–141.
27.
Rosenberg, G., and Ludyanskiy, M. L. (1994). “A nomenclatural review of Dreissena (Bivalvia: Dreissenidae), with identification of the quagga mussel as Dreissena bugensis .”Can. J. Fish. Aquat. Sci., 51, 1474–1484.
28.
Sokal, R. R., and Rohlf, F. J. (1981). Biometry, 2nd Ed., Freeman, San Francisco, Calif.
29.
Waite, J. H.(1983). “Adhesion in byssally attached bivalves.”Biol. Rev., 58, 209–231.
30.
Walz, N. (1973). “Studies on the biology of Dreissena polymorpha Pallas in the Lake of Constance.”Archiv fur Hydrobiologie/Supplement, Stuttgart, Germany, 42, 452–482.
31.
Walz, N. (1975). “The settlement of larvae of Dreissena polymorpha on artificial substrates.”Archiv fur Hydrobiologie/Supplement, Stuttgart, Germany, 47, 423–431.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Feb 1, 1996
Published in print: Feb 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.