Excess Biofilm Control by Distributor-Speed Modulation
Publication: Journal of Environmental Engineering
Volume 121, Issue 4
Abstract
The concept of slowing the distributor speed to flush excess biofilm from rock media was discovered by English investigators in the late 1940s. In the 1980s, German investigators quantified the hydraulic effect of average flow and distributor speed in terms of instantaneous or flushing intensity ( SK ), in mm/pass of an arm. Studies and analysis conducted in recent years have found that the use of slowed distributor speed was effective in improving performance, but that optimum speed was much higher than that required to flush the media. This information evolved into distributor control/drive arrangements that would automatically provide the optimum speed as a function of flow and loading. This concept has been retrofitted at several wastewater-treatment plants, and the Central Valley, Utah, design and initial results are presented. A number of sizing formulations are provided that have evolved from these experiences.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Albertson, O. E. (1989a). “Slow down that trickling filter!”WPCF Operations Forum, (Jan.), 15–20.
2.
Albertson, O. E. (1989b). “Slow motion distributor gain momentum.”WPCF Operations Forum, (Aug.), 28–29.
3.
Balakrishnan, S., Eckenfelder, W. W., and Brown, C. (1969). “Organics removal by a selected trickling filter media.”Water and Wastes Engrg./Industrial, No. 1, 22–25.
4.
Boller, M., and Gujer, W.(1986). “Nitrification in tertiary trickling filters followed by deep-bed filters.”Wat. Res., 20(11), 1363–1373.
5.
Design of wastewater treatment plants: ASCE manual and report on engineering practice No. 76; Chapter 12, (1992). ASCE, New York, N.Y.
6.
“Gruńdś;atze für die Bemessung von einstufigen Tropfkörpern und Scheibentauchkörpern mit Anschlußwertn über 500 Einwohnergleichwerten.” (1983). Arbeiblatt A135, Section 3.2.2 Tropfkorperbessung, St. Augustin, Germany, 6 (in German).
7.
Hawkes, H. A. (1955). “The effect of periodicity of dosing on the amount of film and numbers of insects and worms in alternating double filters at Minworth, Birmingham.”Inst. of Sewage Purification J. and Proc., No. 1, 48–50.
8.
Howland, W. E. (1958). “Flow over porous media as in a trickling filter.”Proc., 12th Annu. Industrial Waste Conf., Purdue Univ., West Lafayette, Ind., Vol. 94, 435–465.
9.
Kornegay, B. H., and Andrews, J. F. (1968). “Kinetics of fixed film biological reactor.”J. Water Pollution Control Federation, Vol. 40, 460–468.
10.
Lumb, C., and Barnes, J. P. (1948). “Periodocity of dosing percolating filters.”J. Inst. of Sewage Purification, No. 1, 83–89.
11.
Maier, W. J., Behn, V. C., and Gates, C. D. (1967). “Simulation of the trickling filter process.” JSED/ASCE, SA4, pp. 91–111.
12.
Orr, P., and Lawty, R.(1990). “Operating experience with large random packed biofilm reactors.”Water Sci. and Technol., 22(1/2), 203–214.
13.
O'Shaughnessey, F. G. (1931). “Some considerations in the oxidation of sewage.”Proc., Assoc. of Mgrs. of Sewage Disposal Works, 74.
14.
Richards, T. (1984). “Evaluation of biological tower/suspended growth systems.”Proc., 2nd Int. Conf. on Fixed-Film Biological Processes, Arlington, Virginia, 1584–1622.
15.
Sarner, E. (1978). “Plastic packed trickling filters.” Dept. of Water Resour. Engrg. and Envir. Engrg., Univ. of Lund, Sweden.
16.
Tomlinson, T. G., and Hall, H. (1955). “The effect of periodicity of dosing on the efficiency of percolating filters.”Inst. of Sewage Purification J. and Proc., No. 1, 40–47.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Apr 1, 1995
Published in print: Apr 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.