Observed Downwash Concentrations Compared to ISCST Predictions in Urban Core
Publication: Journal of Environmental Engineering
Volume 121, Issue 1
Abstract
An atmospheric tracer (SF 6 ) was released from an industrial stack in an urban core during nocturnal neutral to stable atmospheric conditions in an effort to determine the dispersive characteristics and the atmospheric transport of stack effluent under these conditions. Tracer concentration data are compared to predictions made by the Environmental Protection Agency's Industrial Source Complex Short Term (ISCST) model. ISCST is the regulatory air-pollution model typically recommended in situations where structure-induced plume downwash is a possibility. Under the meteorological conditions and stack parameters sampled in the present study, the downwash algorithm causes the ISCST model to overpredict surface concentrations below 3.5 m/s or below a wind speed/exit velocity ( u /V e) ratio of 0.25. Model performance was better in neutral than in stable atmospheric conditions. The stack effluent temperature was >450°K, and the model overprediction may be due in part to the treatment of thermal buoyancy in the model treatment of building wake downwash.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Fackrell, J. E.(1984). “Parameters characterising dispersion in the near wake of buildings.”J. Wind Engrg. and Ind. Aero., 16, 97–118.
2.
Huber, A. H. (1979). “An evaluation of obstacle wake effects on plume dispersion.”AMS Fourth Symp. on Turbulence, Diffusion and Air Pollution, AMS, Boston, Mass.
3.
Huber, A. H.(1984). “Evaluation of a method for estimating pollutant concentrations downward of influencing buildings.”Atmos. Envir., 18(11), 2313–2338.
4.
“Industrial source complex (ISC) dispersion model user's guide, Vol. 1.” (1987). 2nd Ed., (Revised), OAQPS EPA-450/4-88 002a, Environmental Protection Agency, Washington, D.C., Dec.
5.
Schulman, L. L., and Hanna, S. R.(1986). “Evaluation of downwash modifications to the industrial source complex model.”J. APCA, 36, 258–264.
6.
Schulman, L. L., and Scire, J. S. (1991). “The effect of stack height, exhaust speed, and wind direction on concentrations from a rooftop stack.”ASHRAE Trans., 97(2).
7.
Schulman, L. L., and Scire, J. S. (1993). “Building downwash screening modeling for the downwind recirculation cavity.”J. AWMA, 43, Aug.
8.
Thistle, H. W., Murray, D. R., Carroll, M. R., and Gustafson, G. W. (1992). “Building wake pollutant concentrations in an urban setting: a tracer study to evaluate regulatory model performance.” AICHE Symp. Series 288, AICHE, New York, N.Y., Vol. 88.
9.
Thistle, H. W., Murray, D. R., Ratte, M. R., and Carroll, M. R.(1995). “Atmospheric tracer concentrations from an elevated source in an urban core.”J. Envir. Engrg., 121(1), 5–15.
10.
Turner, D. B. (1970). “Workbook of atmospheric dispersion estimates.”EPA OAP Pub#AP-26, Environmental Protection Agency, Washington, D.C.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 121 • Issue 1 • January 1995
Pages: 16 - 20
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Jan 1, 1995
Published in print: Jan 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.