Organic Compounds in Ferrous Foundry Process Waste Leachates
Publication: Journal of Environmental Engineering
Volume 119, Issue 1
Abstract
An investigation is conducted to determine the potential for and extent of ground‐water contamination by organic matter arising from ferrous foundry solid‐waste landfills. In the laboratory, the Environmental Protection Agency's (EPA's) toxicity characteristic leaching procedure (TCLP) is used on waste samples representing nine common binder systems to identify organic compounds that may be released from these materials in landfills. Leachates are analyzed by gas chromatography/mass spectrometry (GC/MS) for qualitative analysis against a data base of 45,000 compounds, and by gas chromatography/flame ionization detector (GC/FID) for quantitative analysis. A field study at four ferrous foundry waste landfills is conducted to determine presence of organic compounds leached from the solid wastes. Laboratory results indicate that although a wide variety of organic compounds are detected, most are present at low concentrations. Core oil and phenolic urethane binder systems leached the largest number of organic compounds and at the highest concentrations. No samples produced concentrations above the TCLP regulatory levels. In field investigations, trace concentrations of some organic compounds, all below quantitative limits, were found in ground‐waters adjacent to three landfills.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Blaha, F. J., Ham, R. K., Boyle, W. C., Kunes, T. J., Nichols, D. G., and Stanforth, R. R. (1985). Leachate and groundwater quality in and around ferrous foundry landfills and comparisons to leach test results, American Foundrymen's Soc., Golf and Wolf Roads, Des Plaines, Ill.
2.
“Control of toxic organic pollutants.” (1984). Report on NUS Project Number 3828.10, NUS Corp., U.S. EPA Effluent Guidelines Div., Washington, D.C.
3.
“Definition and procedure for determination of the method detection limit.” (1984). Fed. Register, 49(Oct.), 43,256.
4.
Engroff, E. C., Fero, R. L., Ham, R. K., and Boyle, W. C. (1989). Laboratory leaching of organic compounds in ferrous foundry process waste, American Foundrymen's Soc., Golf and Wolf Roads, Des Plaines, Ill.
5.
Fero, R. L., Ham, R. K., and Boyle, W. C. (1986). An investigation of groundwater contamination by organic compounds leached from iron foundry solid wastes, American Foundrymen's Soc., Golf and Wolf Roads, Des Plaines, Ill.
6.
“Identification and listing of hazardous waste.” (1986). Fed. Register, 51(June), 114, 21,685.
7.
Krueger, R. C., Ham, R. K., and Boyle, W. C. (1989). “The variability of ferrous foundry waste leaching characteristics and comparison to landfill unsaturated zone leachate quality.” Proc. of 43rd Annual Purdue Industrial Waste Conference, Lewis Publishers, Inc., Chelsea, Mich., 605–616.
8.
Santa Maria, C. (1974). “A study of foundry waste materials,” M.S. Thesis, University of Wisconsin‐Madison, Wisc.
9.
Scott, W. D., and Feazel, C. E. (1976). “A review of organic sand binder chemistry,” Mod. Cast., Jun.
10.
“Solid Waste Disposal Facility Criteria.” (1988). Fed. Register, 53(Aug.), 33,314.
11.
Test methods for evaluating solid waste, Vol. 1 B: Laboratory manual, physical/chemical methods. (1986). U.S. EPA, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Mar 10, 1991
Published online: Jan 1, 1993
Published in print: Jan 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.