Permeable Treatment Beds for Plating Sludge Disposal
Publication: Journal of Environmental Engineering
Volume 117, Issue 5
Abstract
The purpose of this paper is to summarize aspects of the permeable treatment bed concept for the containment of metals from a plating sludge when landfilled. Background information presented in the literature and an experimental proof‐of‐concept investigation are included. Laboratory experiments were performed under controlled conditions, using model reactors to simulate the leachability of a metal hydroxide sludge placed in a humid landfill environment. The effects of simulated natural and acid rains on the leachability of selected metals are considered. The results indicate the effectiveness of the concept to control the release of heavy metals from the sludge into ground water.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Artiola, J., and Fuller, W. H. (1979). “Effects of crushed limestone barriers on chromium attenuation in soils.” J. Envir. Quality, 9(4), 503–510.
2.
Draper, C. E. (1986). “Controlling metal finishing sludge leachability: Laboratory studies.” Thesis presented to Pennsylvania State University at University Park, Pa., in partial fulfillment of the requirements for the degree of Master of Science.
3.
Federal register, 40 CFR (1980). Part 261.24, 45(98), 33063‐33285.
4.
Federal register, 40 CFR (1990). Part 261 et al., 55(61), 11798‐118777.
5.
Handbook of remedial action at waste disposal sites (1985). Environmental Protection Agency, Cincinnati, Ohio.
6.
Lancy, L. E. (1984). “Waste treatment and hazardous waste management problems facing the metal finishing industry in Pennsylvania.” Report No. LW8407, Envir. Resour. Res. Inst., Pennsylvania State Univ., University Park, Pa.
7.
Lancy, L. E., and Steward, F. A. (1978). “Disposal of metal finishing sludges: The segregated landfill concept.” Plating and Surface Finishing, 65(12).
8.
Peters, R. W., and Ferg, J. (1987). “The dissolution/leaching behavior of metal hydroxide metal sulfide sludges from plating wastewaters.” Hazardous Waste and Hazardous Materials, 4(4).
9.
Proc. Fourth Annual Res. Symp. (1978). Environmental Protection Agency, 282–298.
10.
Regan, R. W., and Contos, L. G. (1990). “Development strategy for the implementation of solid waste reclamation: Foundry industry.” Proc. 45th Industrial Waste Conf., Purdue University.
11.
Regan, R. W., and Draper, C. E., (1987). “Sludge disposal: Examining the segregated landfill concept,” Plating and Surface Finishing, 58–63.
12.
“Section 75. 260(b).” (1980). Pennsylvania solid waste management act (Act 97) and regulations.
13.
Standard methods for the examination of water, sewage and industrial wastes. (1985). 16th ed., American Waterworks Association and Water Pollution Control Federation, New York, N.Y.
14.
Steward, F. A., and Lancy, L. E. (1985). “Sludge disposal, a crisis in the making?” Met. Finish., 83(15).
15.
Testing methods for evaluating solid waste, field manual physical chemical methods. (1986). 3rd ed, Environmental Protection Agency, Cincinnati, Ohio.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Sep 1, 1991
Published in print: Sep 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.