Electricity Use in Small Wastewater Treatment Plants
Publication: Journal of Environmental Engineering
Volume 117, Issue 3
Abstract
Electrical energy consumption was documented for five wastewater treatment facilities with average flows of less than Three of the plants employed activated sludge, one used trickling filter/solids contact, and one had parallel activated‐sludge and trickling‐filter trains. All digested sludge aerobically. Most of the larger motors at the facilities (5 kW or more) were operated within a load range giving optimum efficiency. Smaller motors were generally operated in very inefficient load ranges. Aeration for secondary processes or (aerobic) sludge digestion was the greatest single consumer of electrical energy, accounting for 49–97% of total plant requirements. Unit energy consumption at the facilities ranged from 0.39 to of wastewater treated, and from 3.7 to 7.2 kWh/kg removed. This parameter varied inversely with the percentage of design capacity at which the plants were operated. The peaking factor for electrical demand ranged from 1.2–1.9.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andersson, L. G. (1980). Energy savings at wastewater treatment plants. Directorate‐General for Res., Science and Educ., Commission of European Communities, Luxembourg.
2.
GIT Energy efficiency in water and wastewater treatment plants. (1981). Engrg. Exp. Station, Georgia Inst. of Tech., Atlanta, Ga.
3.
Greenwood, D. R., and Gloyna, E. F. (1980). Energy consumption in municipal wastewater treatment facilities. Ctr. for Res. in Water Resour., Univ. of Texas, Austin, Tex.
4.
Hagen, R. M., and Roberts, E. B. (1976). “Energy requirements for wastewater treatment, Part 2.” Water Sew. Works, 123(12), 52–57.
5.
Middlebrooks, E. J., Middlebrooks, C. H., and Reed, S. C. (1981). “Energy requirement for small wastewater treatment systems.” J. Water Pollut. Control Fed., 53(7), 1172–1197.
6.
Mills, A. M., and Tchobanoglous, G. (1974). “Energy consumption in wastewater treatment.” Energy, agriculture and waste management, W. J. Jewel, ed., Ann Arbor Science, Ann Arbor, Mich., 151–185.
7.
Owen, W. F. (1982). Energy in wastewater treatment. Prentice‐Hall, Englewood Cliffs, N.J.
8.
Smeaton, R. W., ed. (1987). Motor application and maintenance handbook. Second Ed., McGraw‐Hill, New York, N.Y.
9.
Smith, R. (1973). Electrical power consumption for municipal wastewater treatment. Report EPA‐R2‐73‐281, U.S. Envir. Protection Agency, Cincinnati, Ohio.
10.
Smith, R. (1978). Total energy consumption in municipal wastewater treatment. Report EPA‐600/2‐78‐149, U.S. Envir. Protection Agency, Cincinnati, Ohio.
11.
Wang, M. H., and Wang, L. K. (1979). “Mathematical modeling of electrical energy consumption and heating requirements by municipal wastewater treatment plants.” J. Envir. Sci., 22(4), 23–26.
12.
Wesner, G. M., Culp, G. L., Lineck, T. S., and Hinrichs, D. J. (1978). Energy conservation in municipal wastewater treatment. Report MCD‐32, EPA 430/9‐77‐011, U.S. Envir. Protection Agency, Washington, D.C.
13.
Zarnett, G. D. (1975). Energy requirements for conventional and advanced waste‐water treatment. Publication No. W47, Pollut. Control Branch, Ministry of the Environment, Toronto, Ontario, Canada.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 117 • Issue 3 • May 1991
Pages: 300 - 307
Copyright
Copyright © 1991 ASCE.
History
Published online: May 1, 1991
Published in print: May 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.