Reaeration Equations and Waste‐Load Allocations
Publication: Journal of Environmental Engineering
Volume 117, Issue 2
Abstract
This technical note estimates the possible effects on calculated critical dissolved oxygen deficits of using reaeration equations as compared to measured reaeration rates. Differences between observed and calculated reaeration coefficients can produce changes of about 30 percent in the calculated critical dissolved oxygen deficits. The uncertainty in dissolved oxygen concentrations, due to the use of reaeration equations rather than measured reaeration coefficients, are probably on the order of tenths to one part per million. This technical note deals with the effects of using equations rather than indications of the adequacy of the equations to represent reaeration coefficients.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cleveland, K. D. (1989). “Predicting reaeration rates in Texas streams.” J. Envir. Engrg., 115(3), 620–632.
2.
Covar, A. P. (1974). “A suggested policy on calculation of reaeration coefficients.” Technical Report, Standards and Modeling Section, Texas Water Quality Board, Austin, Tex.
3.
“Rates, constants, and kinetics formulations in surface water quality modeling.” (1985). Report No. USEPA/600/3‐85/040, 2nd Ed.
4.
“Simplified mathematical model of water quality.” (1971). Hydroscience Inc., under subcontract to Mitre Corp., March.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Mar 1, 1991
Published in print: Mar 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.