Effect of Feed Rate and Classifier Height on Air Classification
Publication: Journal of Environmental Engineering
Volume 116, Issue 4
Abstract
The effects of varying the height and number of stages and feed rate for nonpulsing, passive‐pulsing, and active‐pulsing air classifiers is studied for the separation of complicated particle mixtures. All of the air classifier configurations tested achieve high maximum separation efficiency. Increasing height is found to increase the range of air flow over which separation efficiencies greater than 90% are achieved. Decreasing feed rate has a similar effect. For each of the three classifiers studied—nonpulsing, passive pulsing, and active pulsing—the tallest classifiers at the lowest feed rates achieved the broadest efficient separation range. Results indicate that the passive‐pulsing air classifier performs better than the active‐pulsing air classifier, which in turn performs better than the nonpulsing air classifier.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Crowe, P. B., and Peirce, J. J. (1988). “Particle density and air‐classifier performance.” J. Energy Engrg., ASCE, 114(2), 382–399.
2.
Everett, J., and Peirce, J. J. (1989). “Variable injection active‐pulse air classification.” J. Envir. Engrg., ASCE, 115(2), 395–408.
3.
Jackson, C. R., Stessel, R., and Peirce, J. J. (1988). “Passive pulsing air classifier theory.” J. Envir. Engrg., ASCE, 114(1), 106–119.
4.
McNabb, M. B. (1983). “A new test for the evaluation of air classifier performance.” Thesis presented to Duke University, at Durham, N.C., in partial fulfillment of the requirements for the degree of Master of Science.
5.
Peirce, J. J. (1988). “Pulsed air classification for resource recovery and energy production.” ISWA 88 Proc., Copenhagen, Denmark, 1, 351–357.
6.
Peirce, J. J., and Stessel, R. (1983). “Pulsed flow air classification for waste‐to‐energy.” J. Energy Engrg., ASCE, 109(2), 60–73.
7.
Peirce, J. J., and Taub, J. (1983). “Instabilities in air classification of fuels.” J. Energy Engrg., ASCE, 109(2), 74–87.
8.
Peirce, J. J., Vesilind, P. A., and McNabb, M. (1983). “Predicting air classifier performance.” J. Energy Engrg., ASCE, 109(1), 7–16.
9.
Peirce, J. J., Vesilind, P. A., and McNabb, M. (1982). “Predicting particle behavior in air classifiers.” Conserv. Recycling, 5(4), 209–213.
10.
Peirce, J. J., Vesilind, P. A., and Stessel, R. (1983). “Quantifying the performance of N‐way separators.” Resour. Conserv., 10(3), 243–248.
11.
Peirce, J. J., and Wittenberg, N. (1984). “Zigzag configurations and air classifier performance,” J. Energy Engrg., ASCE, 110(1), 36–48.
12.
Stessel, R., and Peirce, J. J. (1987). “Particle separation in pulsed air flow.” J. Engrg. Mech., ASCE, 113(10), 1594–1607.
13.
Stessel, R., and Peirce, J. J. (1986). “Comparing pulsing classifiers for waste‐to‐energy.” J. Energy Engrg., ASCE, 112(1), 1–13.
14.
Stessel, R., and Peirce, J. J. (1985). “Separation of solid waste with pulsed airflow.” J. Envir. Engrg., ASCE, 111(6), 833–849.
15.
Stessel, R., Peirce, J. J., and Wolf, B. (1986). “Passive pulsing air classifiers for energy production.” J. Energy Engrg., ASCE, 112(1), 25–26.
16.
Stessel, R. I. (1983). “Pulsed flow air classification.” Thesis presented to Duke University, at Durham, N.C., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
17.
Vesilind, P. A., and Henrikson, R. A. (1981). “Effect of feed rate on air classifier performance.” Resour. Conserv., 6(3–4), 211–221.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jul 1, 1990
Published in print: Jul 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.