Efficient Elimination of Organic Liquid Wastes: Wet Air Oxidation
Publication: Journal of Environmental Engineering
Volume 115, Issue 2
Abstract
Wet air oxidation is ideally suited to liquid wastes which are too dilute to be incinerated and too refractory to be handled by chemical or biological oxidation. This process relies on high temperature (470°–600° K) and pressure (2–20 mPa) conditions for oxidation of the organic substances by molecular oxygen in the liquid phase. Several types of industrial wastes, mainly paper‐mill black liquors, biological sludges, and acidic organic wastes, have been tested for oxidation in a batch reactor. This research provides evidence for the high efficiency of the wet air oxidation process for the transformation of most of the pollutants to carbon dioxide. An average removal efficiency of 98% was obtained. As acetic acid is the main intermediate appearing during oxidation of the heavier organics, the study of the behavior of sodium acetate under treatment conditions enabled the most efficient oxidation conditions to be determined for numerous wastes. The various data available are compiled in a general chart which makes a quick determination of the working conditions possible for any indexed waste. Moreover, it has been established that a continuous process usually leads to a net production of energy. It is believed that this research is the first step in the design of a large‐scale wet air oxidation unit.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chou, C. L., and Verhoff, F. H. (1981). “Process for power generation from wet air oxidation with application to coal gasification waste water.” Ind. Eng. Chem. Process Des. Dev., 20, 12–19.
2.
Day, D. C., Hudgins, R. R., and Silveston, P. L. (1973). “Oxidation of propionic acid solutions.” Can. J. Chem. Engrg., 51, 733–740.
3.
Emanuel, N. M., Denisof, E. T., and Maizus, J. R. (1967). Liquid phase oxidation of hydrocarbons, Plenum Press, New York, N.Y.
4.
Fletcher, R., and Powell, M. J. D. (1963). “A rapidly convergent descent method for minimization.” Computer J. 7, 163–168.
5.
Flynn, B. L. (1976). “Increasing the thermodynamic efficiency of black liquor recovery operations by the use of wet air oxidation.” AIChE Symp. Ser. 72(157), 96–99.
6.
Foussard, J. N. (1983). “Etude de l'oxydation en phase aqueuse à température et à pression élevées: transfert de l'oxygene moléculaire et cinétique de dégradation des acides carboxyliques 1égers,” thesis presented to the Institute de Sciences Appliquées, Toulouse, France, in partial fulfillment of the requirements for the degree of Doctor of Engineering.
7.
Foussard, J. N., Debellefontaine, H., and Besombes‐Vailhé, J. (1984). “Transfert de l'oxygène dans l'eau à température et pression élevées, étude cinétique en réacteur agité par la méthode au sulfite.” Can. J. Chem. Engrg., 62, 513–520.
8.
Himelblau, D. M. (1960). “Solubilities of inert gases in water, 0 °C to near the critical point of water.” J. Chem. Engrg. Data 5, 10–15.
9.
Ikeda, I. (1972). “Experimental study on treatment of night soil by the wet air oxidation process.” Wat. Res. 6, 967–979.
10.
Jannot, F. (1972). “Etude de l'épuration de liqueurs noires de papeteries,” thesis presented to the Universite de Paris de Paris VI, Paris, France, in partial fulfillment of the requirements for the degree of Doctor of Engineering.
11.
Morgan, J. E., and Saul, C. M. (1968). “The Zimmermann process in a soda pulp mill recovery system. Development of a commercial process.” Appita 22(3), 60–75.
12.
Ploos Van Amstel, J. J. A., and Rietema, K. (1973). “Wet air oxidation of sewage sludge.” Chem. Ing. Tech. 45(20), 1205–1211.
13.
Pujol, C. (1978). “Contribution à l'étude de l'oxydation en phase liquide de liqueurs noires de papeterie par l'oxygène moléculaire,” thesis presented to the Institute des Sciences Appliquées, Toulouse, France, in partial fulfillment of the requirements for the degree of Doctor of Engineering.
14.
Pujol, C., Talayrach, B., and Besombes‐Vailhé, J. (1979). “Détermination par microcalorimétrie à haute température de la chaleur d'oxydation de liqueur noire de papeterie par l'oxygéne moléculaire.” Trib. Cebedeau 425, 151–154.
15.
Taylor, J. E., and Weygandt, J. C. (1974). “A kinetic study of high pressure aqueous oxidations of organic compounds using elemental oxygen.” Can. J. Chem. 52, 1925–1933.
16.
Teletzke, G. M., Gitchel, W. B., Diddams, D. G., and Hoffman, C. A. (1967). “Components of sludge and its wet air oxidation products.” J. WPCF 39(6), 994–1005.
17.
Williams, P. E. L., Day, D. C., Hudgins, R. R., and Silveston, P. L. (1973). “Wet air oxidation of low molecular weight organic acids.” Wat. Pollut. Res. Can. 8, 224–236.
18.
Williams, P. E. L., Silveston, P. L., and Hudgins, R. R. (1975). “Oxidation of butyric acid solutions.” Can. J. Chem. Engrg., 53, 354–355.
19.
Zimmermann, F. J. (1954). “Waste disposal, U.S. Patent no. 2 665 249.” U.S. Patent Office 6(10), 630–631.
20.
Zimmermann, F. J. (1961). “Wet air combustion.” Ind. Wat. Wast. 6, 102–106.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 115 • Issue 2 • April 1989
Pages: 367 - 385
Copyright
Copyright © 1989 ASCE.
History
Published online: Apr 1, 1989
Published in print: Apr 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.