Applying Groundwater Flow Models in Vapor Extraction System Design
Publication: Journal of Environmental Engineering
Volume 115, Issue 1
Abstract
Vapor extraction systems have recently been used in a variety of environmental engineering applications, including controlling methane migration and remediating problems associated with spills of volatile and semi‐volatile organic compounds. The differential equations that govern pressure flow of gas and vapor in soil are nonlinear in that gas density depends upon gas pressure. However, if the maximum pressure difference between any two points in the flow field is less than approximately 0.5 atmospheres, the differential equations developed to model groundwater flow provide good approximations to gas transport. Vapor extraction systems generally operate under pressure differences on the order of 0.2 atmospheres. Analytical and numerical groundwater flow models can therefore be used to model vapor and gas transport if the proper set of input variables is defined. Analytical groundwater flow models are used to evaluate the results of a field gas extraction test. The results of these evaluations indicate groundwater models can provide an efficient and readily‐accessible tool to aid in designing vapor extraction systems.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alzaydi, A. A., and Moore, C. A. (1978). “Combined pressure and diffusional transition region flow of gases in porous media.” AIChE J., 24(1), 35–43.
2.
Collins, R. E. (1961). Flow of fluids through porous media. Van Nostrand‐Reinhold, Princeton, N.J., 47–74.
3.
Crow, W. L., Anderson, E. P., and Minugh, E. (1985). Subsurface venting of hydrocarbon vapors from a underground aquifer. American Petroleum Inst., Washington, D.C., 4.1
4.
Dullien, F. A. L. (1979). Porous media: fluid transport and pore structure. Academic Press, New York, N.Y., 200–209.
5.
Emcon Assoc. (1980). Methane generation and recovery from landfills. Ann Arbor Sci., Ann Arbor, Mich, 1–48.
6.
Freeze, R. A., and Cherry, S. A. (1979). Groundwater. Prentice‐Hall, Englewood Cliffs, N.J., 26–30; 58–66.
7.
Geankoplis, C. H. (1972). Mass transport phenomena. Holt, New York, N.Y., 1–45; 78–108.
8.
Kidder, R. E. (1957). “Unsteady flow of gas through a semi‐infinite porous medium.” J. of Appl. Mech. Trans., ASME, 24(3), 329–332.
9.
Preliminary evaluation of off‐site gas extraction wells, Midway landfill, Kent, Washington. (1986). Hart‐Crowser, Inc., Seattle, Wash., 1–12.
10.
Satterfield, C. N. (1970). Mass transfer in heterogeneous catalysis. MIT Press, Cambridge, Mass.
11.
Sherard, J. L., Dunnigan, L. P., and Talbot, J. R. (1984). “Basic properties of sand and gravel filters.” J. of Geotech. Eng., 110(6), 684–700.
12.
Weast, R. C., ed. (1968). Handbook of chemistry and physics. CRC Press, Cleveland, Ohio, 1289.
13.
Wootan, W. L., and Voynick, T. (1984). Forced venting to remove gasoline vapor from a large‐scale model aquifer. American Petroleum Inst., Washington, D.C., 1–60.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 115 • Issue 1 • February 1989
Pages: 129 - 149
Copyright
Copyright © 1989 ASCE.
History
Published online: Feb 1, 1989
Published in print: Feb 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.