Using Scanning Lasers to Determine the Thickness of Concrete Pavement
Publication: Journal of Construction Engineering and Management
Volume 134, Issue 8
Abstract
Due to limited budgets and reduced inspection staff, state departments of transportation are in need of innovative approaches for providing more efficient quality assurance on concrete paving projects. In Iowa, the current technique is to take core samples of the pavement, which is a labor intensive, destructive process. Due to these limitations, a limited number of cores are used to estimate the pavement thickness. Any method that can reduce or eliminate cores and increase the statistical accuracy of the thickness estimate will be beneficial. One method, which uses a laser to scan the surface of the base prior to paving and then to scan the surface after paving can determine the thickness at any point. Also, scanning lasers provide thorough data coverage that can be used to calculate thickness variance accurately and identify any areas where the thickness is below tolerance. The laser scanning methodology for this study involved the following: (1) investigating characteristics of the paving process; (2) using a laser scanner on three different sites; (3) processing the data to create clean surface models; (4) performing statistical analyses to determine thickness variability; and (5) summarizing the results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to thank the Iowa Highway Research Board for sponsoring this research. Thanks are also extended to the writers' technical committee, who provided invaluable insights and guidance: John Adam, Chris Brakke, Mark Dunn, Todd Hanson, Kevin Jones, and Kevin Merryman.
References
AASHTO. (2001). “Standard method of test for measuring length of drilled concrete cores.” AASHTO T 148-97, Washington, D.C.
Cable, J. K., and Jaselskis, E. J. (2004). “Stringless Portland cement concrete paving.” TR-490, Center for Portland Cement Concrete Pavement Technology, Ames, Iowa.
Cutelius, B. (1998). “Engineering applications of airborne scanning lasers: Reports from the field.” Photogramm. Eng. Remote Sens., 64(4), 246–253.
Gomaco. (2004). “Stringless control system.” ⟨http://www.gomaco.com/downloads/stringless-brochure.pdf⟩ (Sept. 9, 2004).
Guralnick, S.-A., Suen, E.-S., and Smith, C. (1993). “Automating inspection of highway pavement surfaces.” J. Transp. Eng., 119(1), 1–12.
“Impact echo in the thick of pavement construction.” (1994). Civil Eng., 64(12), 19–21.
Iowa Dept. of Transportation (Iowa DoT). (2001). Standard specifications for highway and bridge construction, Iowa Department of Transportation, Ames, Iowa.
Iowa Dept. of Transportation (Iowa DoT). (2005a). “Materials instructional memorandum 346: Locating, drilling and evaluating Portland cement concrete pavement cores.” Instructional memorandums, Office of Materials, Ames, Iowa.
Iowa Dept. of Transportation (Iowa DoT). (2005b). “Materials instructional memorandum 347: Measuring length of drilled concrete cores.” Instructional memorandums, Office of Materials, Ames, Iowa.
Jaselskis, E. J., Cackler, E. T., Walters, R. C., Zhang, J., and Kaewmoracharoen, M. (2006). “Using scanning lasers for real-time pavement thickness measurement.” TR-538, Center for Transportation Research and Education, Ames, Iowa.
Liu, R., Chen, X., Li, J., Xing, H., and Liang, R. (2005). “A nondestructive device for measuring the thickness of concrete pavement.” Texas Dept. of Transportation, Austin, Tex.
Maierhofer, C. (2003). “Nondestructive evaluation of concrete infrastructure with ground penetrating radar.” J. Mater. Civ. Eng., 15(3), 287–297.
“New tool for nondestructive thickness measurements.” (1995). Public Works, 126(1), 52–53.
Popovics, S., Bilgutay, N.-M., and Karaoguz, M. (2000). “High-frequency ultrasound technique for testing concrete.” ACI Mater. J., 97(1), 58–65.
RIEGL. (2004). “2D tunnel profiler LMS-Q250i.” ⟨http://www.riegl.com/lms-q250i/e-lms-q250i.htm⟩ (Aug. 20, 2004).
Roberts, J., Winstanley, G., and Corke, P. (2003). “Three-dimensional imaging for a very large excavator.” Int. J. Robot. Res., 22(7/8), 467–477.
Sawyer, T. (2002). “Lasers go into overdrive, pushed by technology gains.” ENR, 249(12), 54–56.
Wozencraft, J., and Millar, D. (2005). “Airborne lidar and integrated technologies for coastal mapping and nautical charting.” Mar. Technol. Soc. J., 39(3), 27–35.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jul 26, 2006
Accepted: Nov 16, 2006
Published online: Aug 1, 2008
Published in print: Aug 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.