Weekend Closure for Construction of Asphalt Overlay on Urban Highway
Publication: Journal of Construction Engineering and Management
Volume 126, Issue 4
Abstract
Construction of asphalt overlays for urban highways is generally restricted to off-peak hours, often exclusively nighttime hours, and to partial closures to minimize public inconvenience. Such constraints are thought to adversely affect production and quality. In August 1997, the Washington State Department of Transportation implemented a pilot project to evaluate the option of a full weekend closure—closure of all lanes in a single direction throughout designated weekend hours—as an alternative to nighttime closures. Two concerns were consistent construction quality between nighttime and daytime paving and general comparison of the full weekend closure with other closure strategies. Surface smoothness (rideability) and in-place density were compared between nighttime and daytime mainline paving for this project, and gradation and asphalt cement content variabilities were compared with published average values. Production rates were compared to those from a comparably sized nighttime project. The investigation revealed that consistent quality, exceeding reported average values, may be achieved. High paving production rates resulted from close proximity of the hot mix plant to the work zone.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Asphalt construction handbook. (1992). Barber Greene, DeKalb, Ill.
2.
Dunston, P. S., and Mannering, F. L. (1998). “Evaluation of the full weekend closure strategy for highway reconstruction projects: I-405 Tukwila to Factoria.” Res. Rep. WA-RD 454.1 to the Wash. State Dept. of Transp., University of Washington, Seattle, Wash.
3.
Ellis, R. D., and Kumar, A. (1993). “The influence of nighttime operations on construction cost and productivity.” Transp. Res. Rec. 1389, Transportation Research Board, Washington, D.C., 31–37.
4.
Herbsman, Z. J. (1995). “A+B bidding method—Hidden success story for highway construction.”J. Constr. Engrg. and Mgmt., ASCE, 121(4), 430–437.
5.
Hinze, J. W., and Carlisle, D. (1990). An evaluation of the important variables in nighttime construction, Transportation Northwest (TRANSNOW), University of Washington, Seattle.
6.
Hot mix asphalt fundamentals, Compaction America Inc., Kewanee, Ill.
7.
Huft, D. L. (1992). “Analysis and recommendations concerning profilograph measurements on F0081(50)107 Kingsbury County.” Transp. Res. Rec. 1348, Transportation Research Board, Washington, D.C., 29–34.
8.
Hughes, C. S. (1996). NCHRP synthesis of highway practice 232: Variability in highway pavement construction, Transportation Research Board, Washington, D.C.
9.
Linden, R. N., Mahoney, J. P., and Jackson, N. C. (1989). “Effect of compaction on asphalt performance.” Transp. Res. Rec. 1217, Transportation Research Board, Washington, D.C., 20–28.
10.
Markey, S. J., Mahoney, J. P., and Gietz, R. H. (1994). “An initial evaluation of the WSDOT quality assurance specification for asphalt concrete.” Rep. No. WA-RD 326.1 to the Wash. State Dept. of Transp., University of Washington, Seattle, Wash.
11.
Nam, D., Lee, J., Dunston, P., and Mannering, F. (1999). “Analysis of the impacts of freeway reconstruction closures in urban areas.” Transp. Res. Rec. 1654, Transportation Research Board, Washington, D.C., 161–170.
12.
Price, D. A. (1986). “Nighttime paving.” Implementation Rep., Colorado Department of Transportation for Federal Highway Administration, Washington, D.C.
13.
Read, S. A. ( 1996). “Construction related temperature differential damage in asphalt concrete pavements.” Master's thesis, Dept. of Civ. Engrg., University of Washington, Seattle, Wash.
14.
Rohlf, J. G. (1994). “Innovative contracting practices.” TR News 175, Transportation Research Board, Washington, D.C., 10–36.
15.
Scofield, L. A., Kalvela, S. A., and Anderson, M. R. (1992). “Evaluation of California profilograph.” Transp. Res. Rec. 1348, Transportation Research Board, Washington, D.C., 1–7.
Information & Authors
Information
Published In
History
Received: Mar 19, 1999
Published online: Jul 1, 2000
Published in print: Jul 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.