Availability-Based Reliability-Centered Maintenance Scheduling: Case Study of Domestic (Building-Integrated) Hot Water Systems
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 4, Issue 1
Abstract
This study investigates the availability-based reliability-centered maintenance scheduling of domestic (building-integrated) hot water (DHW) of HVAC systems. The keeping system availability (KSA) method is adopted, which provides maintenance scheduling by incorporating the effect of the maintenance activities. This method has been developed for maintenance scheduling in power plants in which the continual ability to generate power is a critical issue. This approach is applied to the case of the DHW system of HVACs, which is also a critical system in provision of hot water in buildings during the long cold seasons in Canada. The mean time to failure (MTTF) and mean time to repair (MTTR) are used to measure the availability of the DHW system. Components with different maintenance timings are sorted according to the effect of maintenance on availability of the system. At the end, a combination of maintenance schedules for the components of the DHW system is provided to ensure its availability while avoiding overmaintenance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are very much thankful to the editor and reviewers of this paper for their helpful comments and suggestions.
References
Anderson, R. T., and Neri, L., eds. (2012). Reliability-centered maintenance: Management and engineering methods, Springer, Dordrecht, Netherlands.
Barringer & Associates. (1997). Availability, reliability, maintainability, and capability, Humble, TX.
Boryczko, K., Piegdon, I., and Eid, M. (2013). “Collective water supply systems risk analysis model by means of RENO software.” Safety, reliability and risk analysis: Beyond the horizon, R. Steenbergen, et al., eds., Taylor & Francis, London, 1987–1992.
Bose, D., Chattopadhyay, S., Bose, G. K., Adhikary, D. D., and Mitra, S. (2012). “RAM investigation of coal-fired thermal power plants: A case study.” Int. J. Ind. Eng. Comput., 3(3), 423–434.
Calixto, E. (2016). Gas and oil reliability engineering: Modeling and analysis, Gulf Professional Publishing, Cambridge, MA.
Duarte, J. A. C., Craveiro, J. C. T. A., and Trigo, T. P. (2006). “Optimization of the preventive maintenance plan of a series components system.” Int. J. Press. Vessels Pip., 83(4), 244–248.
Gulati, R. (2012). Maintenance and reliability best practices, Industrial Press, New York.
IEEE. (2007). “Recommended practice for the design of reliable industrial and commercial power systems.” IEEE 493-2007, New York, 1–369.
Jamshidi, R., and Esfahani, M. M. S. (2015). “Reliability-based maintenance and job scheduling for identical parallel machines.” Int. J. Prod. Res., 53(4), 1216–1227.
Jones, M. S. (2009). “Risk-based inspection—Pressure relief devices.”, Instituto Superior Técnico, Lisbon, Portugal.
Marquez, A. C. (2007). The maintenance management framework: Models and methods for complex systems maintenance, Springer, London.
Mirela, D. (2011). “Operational reliability of the valves.” Proc., 11th WSEAS Int. Conf. on Wavelet Analysis and Multirate Systems (WAMUS), World Scientific and Engineering Academy and Society, Stevens Point, WI.
Mukerji, R., Merrill, H. M., Erickson, B. W., Parker, J. H., and Friedman, R. E. (1991). “Power plant maintenance scheduling: Optimizing economics and reliability.” IEEE Trans. Power Syst., 6(2), 476–483.
Myrefelt, S. (2004). “The reliability and availability of heating, ventilation and air conditioning systems.” Energy Build., 36(10), 1035–1048.
OREDA (Offshore/Onshore Reliability Data). (2015). “Offshore reliability data handbook (1984–2015).” ⟨https://www.oreda.com/handbook/⟩ (Dec. 15, 2016).
Ramakumar, R. (1996). Engineering reliability: Fundamentals and applications, Prentice Hall, Englewood Cliffs, NJ.
Rausand, M. (1998). “Reliability centered maintenance.” Reliab. Eng. Syst. Saf., 60(2), 121–132.
Selvik, J. T., and Aven, T. (2011). “A framework for reliability and risk centered maintenance.” Reliab. Eng. Syst. Saf., 96(2), 324–331.
Stremel, J. P. (1981). “Maintenance scheduling for generation system planning.” IEEE Trans. Power Apparatus Syst., PAS-100(3), 1410–1419.
Vicente, F. (2016). “Reliability analysis of centrifugal pumps system justifies improvements in gas plant.” ABB Service, Valentín Alsina, Argentina.
Zhang, T., and Nakamura, M. (2005). “Reliability-based optimal maintenance scheduling by considering maintenance effect to reduce cost.” Qual. Reliab. Eng. Int., 21(2), 203–220.
Zhang, T., Nakamura, M., and Hatazaki, H. (2002). “Optimizing maintenance scheduling of equipment by element maintenance interval adjustment considering system availability.” Proc., Winter Meeting of the Power Engineering Society Winter Meeting, Vol. 1, IEEE, New York, 205–210.
Zille, V., Bérenguer, C., Grall, A., and Despujols, A. (2011). “Modelling multicomponent systems to quantify reliability centred maintenance strategies.” Proc., Institution Mech. Eng., Part O: J. Risk Reliab., 225(2), 141–160.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Dec 28, 2016
Accepted: Jun 14, 2017
Published online: Oct 28, 2017
Published in print: Mar 1, 2018
Discussion open until: Mar 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.