Particle Size Effects on Breakage of ACT Aggregates under Physical and Environmental Loadings
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 24, Issue 1
Abstract
Aggregates manufactured from fine-grained thermal waste residues using accelerated carbonation technology (ACT) represent a potential sustainable alternative to natural aggregates. However, for these manufactured products to compete with virgin stone in geotechnical applications, their durability under mechanical and environmental loadings must be assessed. This paper describes the particle breakage that occurs for different grain sizes (entire sample, 5–2.5 mm and 2.5–1.25 mm) of a cement kiln dust accelerated carbonated manufactured aggregate after undergoing triaxial compression, triaxial shear, and freeze/thaw (f/t) testing. The particle breakage of the aggregate was dominated by the larger (5–2.5 mm) size fraction of the sample under all loading conditions. Particle breakage results from f/t testing indicated that the 5–2.5 mm size corresponded to similar or slightly less particle breakage than that under triaxial shear, whereas the particle breakage of the 2.5–1.25 mm aggregate after 20 cycles of freeze–thaw was relatively small. The performance of the carbonated aggregate in terms of relative breakage was similar or slightly better than the results for natural calcareous sand found in the literature.
Get full access to this article
View all available purchase options and get full access to this article.
References
Altuhafi, F. N., and M. R. Coop. 2011. “Changes to particle characteristics associated with the compression of sands.” Geotechnique 61 (6): 459–471. https://doi.org/10.1680/geot.9.P.114.
ASTM. 2011a. Standard test method for consolidated drained triaxial compression test for soils. ASTM D4767. West Conshohocken, PA: ASTM.
ASTM. 2011b. Standard test method for single pellet crush strength of formed catalysts and catalyst carriers. ASTM D4179. West Conshohocken, PA: ASTM.
BSI (British Standards Institution). 2016. Lightweight aggregates. BSI BS EN 13055-4. London: BSI.
Cassini, F., G. M. B. Viggiani, and S. M. Springman. 2013. “Breakage of an artificial crushable material under loading.” Granular Matter 15 (5): 661–673. https://doi.org/10.1007/s10035-013-0432-x.
Coop, M. 1990. “The mechanics of uncemented carbonate sands.” Geotechnique 40 (4): 607–626. https://doi.org/10.1680/geot.1990.40.4.607.
Costa, I., R. Baciocchi, A. Polettini, R. Pomi, C. D. Hills, and P. J. Carey. 2007. “Current status and perspectives of accelerated carbonation processes on municipal waste combustion residues.” Environ. Monit. Assess. 135 (1–3): 55–75. https://doi.org/10.1007/s10661-007-9704-4.
Domingo, C., E. Loste, J. Gomez-Morales, J. Garcia-Carmona, and J. Fraile. 2006. “Calcite precipitation by a high-pressure carbonation route.” J. Supercrit. Fluids 36 (3): 202–215. https://doi.org/10.1016/j.supflu.2005.06.006.
Fernández, B. M., S. J. R. Simons, C. D. Hills, and P. J. Carey. 2004. “A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of .” J. Hazard. Mater. 112 (3): 193–205. https://doi.org/10.1016/j.jhazmat.2004.04.019.
Gunning, P. J., C. D. Hills, A. Antemir, and P. J. Carey. 2011. “Secondary aggregate from waste treated with carbon dioxide.” Proc. Inst. Civ. Engineers: Constr. Mater. 164 (5): 231–239. https://doi.org/10.1680/coma.1000011.
Gunning, P. J., C. D. Hills, and P. J. Carey. 2009. “Production of lightweight aggregate from industrial waste and carbon dioxide.” Waste Manage. 29 (10): 2722–2728. https://doi.org/10.1016/j.wasman.2009.05.021.
Hardin, B. O. 1985. “Crushing of soil particles.” J. Geotech. Eng. 111 (10): 1177–1192. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:10(1177).
Klotz, E. U., and M. R. Coop. 2001. “An investigation of the effect of soil state on the capacity of driven piles in sands.” Geotechnique 51 (9): 733–751. https://doi.org/10.1680/geot.2001.51.9.733.
Lade, P. V., J. A. Yamamuro, and P. A. Bopp. 1996. “Significance of particle crushing in granular materials.” J. Geotech. Eng. Am. Soc. Civ. Eng. 122 (4): 309–316. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:4(309).
Lake, C. B., H. Choi, C. D. Hills, P. Gunning, and I. Manaqibwala. 2016. “Manufactured aggregate from cement kiln dust.” Environ. Geotech. 6 (2): 111–112. https://doi.org/10.1680/jenge.15.00074.
Lee, K. L., and I. Farhoomand. 1967. “Compressibility and crushing of granular soil.” Can. Geotech. J. 4 (1): 68–86. https://doi.org/10.1139/t67-012.
Marsal, R. J. 1967. “Large-scale testing of rockfills materials.” J. Soil Mech. Found. Eng. Div. 93 (2): 27–44.
Mun, W., and J. S. McCartney. 2017. “Roles of particle breakage and drainage in the isotropic compression of sand to high pressures.” J. Geotech. Geoenviron. Eng. 143 (10): 64017071. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001770.
Shahnazari, H., and R. Rezvani. 2013. “Effective parameters for the particle breakage of calcareous sands: An experimental study.” Eng. Geol. 159 (Jun): 98–105. https://doi.org/10.1016/j.enggeo.2013.03.005.
Shipton, B., and M. R. Coop. 2012. “On the compression behaviour of reconstituted soils.” Soils Found. 52 (4): 668–681. https://doi.org/10.1016/j.sandf.2012.07.008.
Yamamuro, J. A., and P. V. Lade. 1993. “Effects of strain rate on instability of granular soils.” Geotech. Test. J. 16 (3): 304–313. https://doi.org/10.1520/GTJ10051J.
Zheghal, M. 2009. “The impact of grain crushing on road performance.” Geotech. Geol. Eng. 27 (4): 549–558. https://doi.org/10.1007/s10706-009-9256-1.
Zheng, W., and D. Tannant. 2016. “Frac sand crushing characteristics and morphology changes under high compressive stress and implications for sand pack permeability.” Can. Geotech. J. 53 (9): 1412–1423. https://doi.org/10.1139/cgj-2016-0045.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jan 29, 2019
Accepted: Jun 10, 2019
Published online: Aug 28, 2019
Published in print: Jan 1, 2020
Discussion open until: Jan 28, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.