Treating Navy Wastewaters Using High-Shear Rotary and Tubular Membrane Systems
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 18, Issue 3
Abstract
Membrane filtration systems can handle varying wastewaters with simple and robust operation. However, current low permeate flux rates attributed to solids accumulation at the membrane surface limit more widespread technology use. This work seeks a better understanding of flux performance relative to solids concentration and transmembrane pressure coupled with potential flux enhancements. Enhancements revolve around disturbing solids accumulation at the membrane surface by physical cleaning or periodic flow reversal. Results indicate both rotary and tubular membranes produce consistent particle-free, low-turbidity permeate at varying levels of feed solids concentrations. Rotary membranes may produce only slightly greater permeate flux rates than tubular membranes at low feed solids concentration, but the difference increases drastically as feed solids concentration increases. Rotary membrane systems can concentrate wastewaters to greater than 40% solids, but the greater the feed solids, the less additional pressure increases flux. Membrane surface cleaning by continually cleaning via nylon brushes contacting the membrane surface, periodic sponge ball surface cleanings, or periodic flow reversal can significantly increase permeate flux rates (2 to 20 times).
Get full access to this article
View all available purchase options and get full access to this article.
References
Bendick, J. A., Modise, C. M., Miller, C. J., Neufeld, R. D., and Vidic, R. D. (2004). “Application of cross flow microfiltration for the treatment of combined sewer overflow wastewater.” J. Environ. Eng., 1442–1449.
Gan, Q. (1999). “Evaluation of solids reduction and backflush technique in crossflow microfiltration of a primary sewage effluent.” Resour. Conserv. Recycl., 27(1–2), 9–14.
Gan, Q., and Allen, S. J. (1999). “Crossflow microfiltration of a primary sewage effluent-solids retention efficiency and flux enhancement.” J. Chem. Technol. Biotechnol., 74(7), 639–699.
Lorch, W., ed. (1987). Handbook of water purification, Ellis Horwood, Chichester.
Reed, B., Lin, W., and Viadero, R. (1998). “Treatment of a concentrated oily waste using a high-shear rotary ultrafiltration system: Preliminary results.” Fluid/Part. Sep. J., 11(1), 82–88.
Reed, B. E., Vaughan, R., Lin, W., and Viadero, R. (2000). “Recovery of metal working (MW) fluids using the chelation-ultrafiltration (CUF) process.” J. Environ. Eng., 807–814.
Shondi, R., and Bhave, R. (2001). “Role of backpulsing in fouling minimization in crossflow filtration with ceramic membranes.” J. Membr. Sci., 186(1), 41–52.
Viadero, R., Masciola, D., Reed, B., and Vaughan, R. (2000). “Two-phase limiting flux in high-shear rotary ultrafiltration of oil-in-water emulsions.” J. Membr. Sci., 175(1), 85–96.
Viadero, R., and Reed, B. (1999). “Effects of rotation and pressure in high-shear rotary disk ultrafiltration.” J. Environ. Eng., 638–646.
Viadero, R., Vaughan, R., and Reed, B. (1999). “Study of series resistances in high-shear rotary ultrafiltration.” J. Membr. Sci., 162(1–2), 199–211.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 2, 2012
Accepted: Jul 12, 2013
Published online: Feb 14, 2014
Published in print: Jul 1, 2014
Discussion open until: Jul 14, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.