Determining the Middle Tower Stiffness Value in an In-Plane Double-Cable Triple-Tower Suspension Bridge
Publication: Journal of Bridge Engineering
Volume 23, Issue 7
Abstract
Determining the stiffness of the middle tower is a key problem in designing multispan suspension bridges. In this study, the expressions for the upper and lower limits of the middle tower stiffness of double-cable triple-tower suspension bridges were deduced by implementing the antiskid safety factor and the deflection-to-span ratio of the main cable as the control indexes in an analytical algorithm to determine the appropriate stiffness of the middle tower. The formulas obtained were verified by finite-element models, and the results showed good agreement. Furthermore, the formulas can be used to quickly select the type of middle tower for a double-cable multispan suspension bridge at the initial design phase. The value ranges of the middle tower stiffness were compared between the double-cable and conventional multispan suspension bridges, and the results showed a large difference between the upper and lower limits of the middle tower stiffness in a double-cable system; the middle tower stiffness of the double-cable system was more likely to simultaneously meet the requirements of structural deformation and skid resistance of the main cable, and the value range of the middle tower stiffness can be expanded by increasing the sag-to-span ratio of the bottom cable or decreasing the ratio of the top cable. The lower limit of the middle tower stiffness of the double-cable multispan suspension bridge is smaller than that of the conventional bridge, which allows the flexible tower to be incorporated into the design of a double-cable system.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by the National Natural Science Foundation of China (No. 51608440) and the Fundamental Research Funds for the Central Universities (No. 2452017114). The authors express their gratitude for the financial assistance.
References
Chai, S. B., Xiao, R. C., and Li, X. N. (2014). “Longitudinal restraint of a double-cable suspension bridge.” J. Bridge Eng., 06013002.
Chai, S. B., Xiao, R. C., and Wang, X. L. (2016). “Approximate calculation for deformation of multi-tower suspension bridges.” Struct. Eng. Int., 26(1), 45–51.
Choi, D. H., Gwon, S. G., and Na, H. S. (2014). “Simplified analysis for preliminary design of towers in suspension bridge.” J. Bridge Eng., 04013007.
del Arco, D. C., and Aparicio, Á. C. (2001). “Preliminary static analysis of suspension bridges.” Eng. Struct., 23(9), 1096–1103.
Forsberg, T. (2001). “Multi-span suspension bridges.” Int. J. Steel Struct., 1(1), 63–73.
Gimsing, N. J. (1997). Cable supported bridges: Concept and design, 2nd Ed., Wiley, Hoboken, NJ.
Hasegawa, K., Kojima, H., and Sasaki, M. (1995). “Frictional resistance between cable and saddle equipped with friction plate.” J. Struct. Eng., 1–14.
Jennings, A. (1983). “Gravity stiffness of classical suspension bridges.” J. Struct. Eng., 16–36.
midas Civil [Computer software]. (2012). MIDAS Information Technology Company, Seongnam, Gyeonggi, South Korea.
Takena, K., Sasaki, M., and Hata, K. (1992). “Slip behavior of cable against saddle in suspension bridges.” J. Struct. Eng., 377–391.
Thai, H. T., and Choi, D. H. (2013). “Advanced analysis of multi-span suspension bridges.” J. Constr. Steel Res., 90, 29–41.
Wang, H., Tao, T., Zhou, R., and Hua, X., and Kareem, A. (2014). “Parameter sensitivity study on flutter stability of a long-span triple-tower suspension bridge.” J. Wind Eng. Ind. Aerodyn., 128, 12–21.
Wang, H., Zou, K. G., Li, A. Q., and Jiao, C. K. (2010). “Parameter effects on the dynamic characteristics of a super-long-span triple-tower suspension bridge.” J. Zhejiang Univ. Sci. A: Appl. Phys. Eng., 11(5), 305–316.
Wang, X. L., Chai, S. B., and Xu, Y. (2016). “Deformation characteristics of double-cable multispan suspension bridges.” J. Bridge Eng., 06015007.
Wang, X. L., Chai, S. B., and Xu, Y. (2017). “Sliding resistance of main cables in double-cable multispan suspension bridges.” J. Bridge Eng., 06016011.
Yoshida, O., Okuda, M., and Moriya, T. (2004). “Structural characteristics and applicability of four-span suspension bridge.” J. Bridge Eng., 453–463.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 23 • Issue 7 • July 2018
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Jul 3, 2017
Accepted: Jan 15, 2018
Published online: Apr 19, 2018
Published in print: Jul 1, 2018
Discussion open until: Sep 19, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.