Rectangular Footing Dimensions to Develop the Plastic Moment Capacity of RC Bridge Columns
Publication: Journal of Bridge Engineering
Volume 23, Issue 7
Abstract
This technical note presents charts that allow bridge engineers to quickly estimate the minimum footing dimensions, as controlled by the nominal (or ultimate) bearing capacity of the supporting soil, to develop the biaxial plastic moment capacity of corresponding columns. The design aids are applicable to rectangular, circular, and oval reinforced concrete (RC) columns with cross-sectional dimensions of up to 2.44 m (8 ft), longitudinal reinforcement ratios from 1 to 2%, transverse reinforcement ratios from 0.4 to 1.2%, concrete compressive strengths () from 28 (4) to 42 MPa (6 ksi), and axial load levels between 0.05 and 0.2.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2011). “Guide specifications for LRFD seismic bridge design, 2nd Ed.” LRFDSEIS-2, Washington, DC.
AASHTO. (2014). LRFD bridge design specifications and commentary, 7th Ed., Washington, DC.
Antonellis, G., Gavras, A., Panagiotou, M., Kutter, B. L., Guerrini, G., Sander, A. C., and Fox, P. J. (2015). “Shake table test of large-scale bridge columns supported on rocking shallow foundations.” J. Geotech. Geoenviron. Eng., 04015009.
ASCE. (2014). “Seismic evaluation and retrofit of existing buildings.” ASCE/SEI 41-13, Reston, VA.
Blandon, C. A., Smith-Pardo, J. P., and Ortiz, R. A. (2015). “Rotational capacity of shallow footings and its implication on SSI analyses.” Earthquakes Struct., 8(3), 591–617.
Bowles, J. E. (1997). Foundation analysis and design, 5th Ed. (international), McGraw-Hill, New York.
Chadwell, C. B., and Imbsen, R. A. (2004). “XTRACT: A tool for axial force-ultimate curvature interactions.” Proc., Structures Congress 2004, ASCE, Reston, VA.
Deng, L., Kutter, B. L., and Kunnath, S. K. (2012). “Centrifuge modeling of bridge systems designed for rocking foundations.” J. Geotech. Geoenviron. Eng., 335–344.
Drosos, V., Georgarakos, T., Loli, M., Anastasopoulos, I., Zarzouras, O., and Gazetas, G. (2012). “Soil-foundation-structure interaction with mobilization of bearing capacity: Experimental study on sand.” J. Geotech. Geoenviron. Eng., 1369–1386.
Kim, D.-K., Lee, S.-H., Kim, D.-S., and Choo, Y. W. (2015). “Rocking effect of a mat foundation on the earthquake response of structures.” J. Geotech. Geoenviron. Eng, 4014085.
Meyerhof, G. G. (1953). “The bearing capacity of footings under eccentric and inclined loads.” Proc. 3rd Int. Conf. of Soil Mech. and Found. Eng.; Organizing Committee, of the International Conference on Soil Mechanics and Foundation Engineering, Zurich, Switzerland.
Smith-Pardo, J. P., Ortiz, A., and Blandon, C. A. (2014). “Biaxial capacity of rigid footings: Simple closed-form equations and experimental results.” Eng. Struct., 69, 149–157.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Jul 14, 2017
Accepted: Dec 21, 2017
Published online: Apr 30, 2018
Published in print: Jul 1, 2018
Discussion open until: Sep 30, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.