Abstract
Accurately determining the current state of the main cables of a suspension bridge is critical to assessing the safety of the bridge. These cables are composed of thousands of individual bridge wires, each of which deteriorates over time at a different rate. Current inspection methods provide an incomplete picture of the condition across the cable section, so cable strength estimation methods that rely on this inspection data involve considerable uncertainty. Furthermore, there is no method for estimating the continuing decline in cable strength following an inspection due to ongoing corrosion. This paper lays the groundwork for a time-dependent corrosion-rate model for bridge wires by using monitored environmental parameters from the cable interior. To establish this model, a methodology to estimate the annual corrosion rate as a function of environmental variables was proposed. First, experimental data on the corrosion rate of carbon steel from previous studies were analyzed using machine learning methods. Temperature, relative humidity, pH, and Cl− concentration were determined to be the most relevant variables for predicting the corrosion rate. Next, cyclic corrosion tests were performed by subjecting bridge wires to various levels of these environmental variables, and the resulting data were used to augment the experimental data set from previous studies. Finally, a corrosion-rate model that predicts the annual corrosion rate of bridge wires was developed using the augmented data set.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was sponsored by the Federal Highway Administration under Contract DTFH61-04-C-00040 (program managers Dr. H. Ghasemi and Dr. P. Virmani). The support and guidance of Dr. Ghasemi and Dr. Virmani are greatly appreciated. The continuous suggestions by Dr. Bojidar Yanev, New York City Department of Transportation, were also greatly appreciated.
References
Abdul Azim, A. A., and Sanad, S. H. (1972). “Effects of acid concentration, C-content and temperature on the corrosion rate of steel in HCl.” Corros. Sci., 12(4), 313–324.
ASM International. (1987). Corrosion. Metals handbook, Vol. 13, 9th Ed. ASM International, Materials Park, OH.
ASTM. (2011). “Standard practice for modified salt spray (fog) testing”. ASTM G85.11. West Conshohocken, PA.
Bäck, T., and Schwefel, H.-P. (1993). “An overview of evolutionary algorithms for parameter optimization.” Evol. Comput., 1(1), 1–23.
Barton, S. C., Vermaas, G. W., Duby, P. F., West, A. C., and Betti, R. (2000). “Accelerated corrosion and embrittlement of high-strength bridge wire.” J. Mater. Civ. Eng., 33–38.
Betti, R., Khazem, D., Carlos, M., Gostautas, R., and Virmani, Y. P. (2014). “Corrosion monitoring research for New York city bridges.” Rep. No. 1010 FHWA-HRT-14-023, Federal Highway Administration, McLean, VA.
Betti, R., West, A. C., Vermaas, G., and Cao, Y. (2005). “Corrosion and embrittlement in high-strength wires of suspension bridge cables.” J. Bridge Eng., 151–162.
Betti, R., and Yanev, B. (1999). “Conditions of suspension bridge cables: New York City case study.” Transp. Res. Rec., 1654, 105–112.
Bieniek, M., and Betti, R. (1998). Cable conditions for New York City bridges, NYCDOT, New York.
Bishop, C. M. (2006). Pattern recognition and machine learning, Springer, New York.
Brence, J. R., and Brown, D. E. (2002). “Data mining corrosion from eddy current non-destructive tests.” Comput. Ind. Eng., 43(4), 821–840.
Briggs, C. M. (1968). “Atmospheric corrosion of carbon and low alloy cast steels.” Metal corrosion in the atmosphere, STP435, W. H. Ailor and S. K. Coburn, eds., ASTM, Conshohocken, PA, 271–284.
Cai, J., Cottis, R. A., and Lyon, S. B. (1999). “Phenomenological modelling of atmospheric corrosion using an artificial neural network.” Corros. Sci., 41(10), 2001–2030.
Cao, Y., Vermaas, G. W., Betti, R., West, A. C., and Duby, P. F. (2003). “Corrosion and degradation of high-strength steel bridge wire.” Corrosion, 59(6), 547–554.
Cawley, G. C., and Talbot, N. L. C. (2010). “On over-fitting in model selection and subsequent selection bias in performance evaluation.” J. Mach. Learn. Res., 11, 2079–2107.
Chang, C.-C., and Lin, C.-J. (2011). “LIBSVM: A library for support vector machines.” ACM Trans. Intell. Syst. Technol., 2(3), 27:1–27:27.
Chavel, B. W., and Leshko, B. J. (2012). “Primer for the inspection and strength evaluation of suspension bridge cables.” Rep. No. FHWA-IF-1038 11-045 Prepared for the Federal Highway Administration, HDR Engineering, Pittsburgh, PA.
Chou, J.-S., Ngo, N.-T., and Chong, W. K. (2017). “The use of artificial intelligence combiners for modeling steel pitting risk and corrosion rate.” Eng. Appl. Artif. Intell., 65(Oct), 471–483.
Corvo, F., Minotas, J., Delgado, J., and Arroyave, C. (2005). “Changes in atmospheric corrosion rate caused by chloride ions depending on rain regime.” Corros. Sci., 47(4), 883–892.
Davis, J. R. (2001). Alloying: Understanding the basics, ASM International, Materials Park, OH.
de la Fuente, D., Castaño, J. G., and Morcillo, M. (2007). “Long-term atmospheric corrosion of zinc.” Corros. Sci., 49(3), 1420–1436.
Eiselstein, L. E., and Caligiuri, R. D. (1987). “Atmospheric corrosion of the suspension cables on the Williamsburg Bridge.” Degradation of metals in the atmosphere, STP965, S. W. Dean and T. S. Lee, eds., ASTM, West Conshohocken, PA, 78–95.
Fan, R.-E., Chen, P.-H., and Lin, C.-J. (2005). “Working set selection using second order information for training support vector machines.” J. Mach. Learn. Res, 6, 1889–1918.
Feliu, S., Morcillo, M., and Feliu, J. S., Jr. (1993a). “The prediction of atmospheric corrosion from meteorological and pollution parameters—I. Annual corrosion.” Corros. Sci., 34(3), 403–414.
Feliu, S., Morcillo, M., and Feliu, J. S., Jr. (1993b). “The prediction of atmospheric corrosion from meteorological and pollution parameters—II. Long-term forecasts.” Corros. Sci., 34(3), 415–422.
Fischer, M. (1978). “Model presentations on the course of the reaction and discussion of the functions of passivating additives in the chemical passivation of iron in the pH range weakly acidic, neutral, basic.” Werkst. Korros., 29(3), 188–198.
Furuya, K., Kitagawa, M., Nakamura, S., and Suzumura, K. (2000). “Corrosion mechanism and protection methods for suspension bridge cables.” Struct. Eng. Int., 10(3), 189–193.
Harrell, F. (2001). Regression modeling strategies with applications to linear models, logistic regression, and survival analysis, Springer-Verlag, New York.
Hawkins, D. M., and Kraker, J. (2010). “Deterministic fallacies and model validation.” J. Chemom., 24, 188–193.
Kamrunnahar, M., and Urquidi-Macdonald, M. (2010). “Prediction of corrosion behavior using neural network as a data mining tool.” Corros. Sci., 52(3), 669–677.
Kobus, J. (2000). “Long-term atmospheric corrosion monitoring.” Mater. Corros., 51(2), 104–108.
Kohavi, R. (1995). “A study of cross-validation and bootstrap for accuracy estimation and model selection.” Proc., 14th Int. Joint Conference on Artificial Intelligence, Vol. 2, International Conference on Artificial Intelligence, 1137–1145.
Kohavi, R., and John, G. H. (1997). “Wrappers for feature subset selection.” Artif. Intell., 97(Dec), 273–324.
Krstajic, D., Buturovic, L. J., Leahy, D. E., and Thomas, S. (2014). “Cross-validation pitfalls when selecting and assessing regression and classification models.” J. Cheminf., 6, 1–15.
Mayrbaurl, R. M., and Camo, S. (2004). “Guidelines for inspection and strength evaluation of suspension bridge parallel wire cables.” NCHRP Rep. 534, Transportation Research Board, Washington, DC.
Nakamura, S., and Suzumura, K. (2005). “Corrosion assessment of bridge cables.” Proc., 5th Int. Conf., Bridge Management, Vol. 1, G. A. R. Parke and P. Disney, eds., Thomas Telford, London, 28–36.
Nakamura, S., and Suzumura, K. (2012). “Experimental study on repair methods of corroded bridge cables.” J. Bridge Eng., 720–727.
Nakamura, S.-I., Suzumura, K., and Tarui, T. (2004). “Mechanical properties and remaining strength of corroded bridge wires.” Struct. Eng. Int., 14(1), 50–54.
Revie, R., and Uhlig, H. H. (2008). Corrosion and corrosion control: An introduction to corrosion science and engineering, 4th ed., Wiley-Interscience, Hoboken, NJ.
Rodriguez, J. J. S., Hernández, F. J. S., and González, J. E. G. (2003). “The effect of environmental and meteorological variables on atmospheric corrosion of carbon steel, copper, zinc and aluminium in a limited geographic zone with different types of environment.” Corros. Sci., 45(4), 799–815.
Saha, J. K. (2013). Corrosion of constructional steels in marine and industrial environment: Frontier work in atmospheric corrosion, Springer India, New Delhi, India.
Sloane, M. J. D., Betti, R., Marconi, G., Hong, A. L., and Khazem, D. (2012). “Experimental analysis of a nondestructive corrosion monitoring system for main cables of suspension bridges.” J. Bridge Eng., 653–662.
Stahl, F. L. (1996). Cable corrosion in bridges and other structures: Causes and solutions, ASCE, New York.
Suzumura, K., and Nakamura, S.-i. (2004). “Environmental factors affecting corrosion of galvanized steel wires.” J. Mater. Civ. Eng., 1–7.
Varma, S., and Simon, R. (2006). “Bias in error estimation when using cross-validation for model selection.” BMC Bioinf., 7.
Wang, J. H., Wei, F. I., Chang, Y. S., and Shih, H. C. (1997). “The corrosion mechanisms of carbon steel and weathering steel in SO2 polluted atmospheres.” Mater. Chem. Phys., 47(1), 1–8.
Witten, I., Frank, E., and Hall, M. A. (2011). Data mining: Practical machine learning tools and techniques, 3rd ed., Morgan Kaufman, San Francisco.
Zhang, X. G. (2000). “Galvanic corrosion.” Uhlig’s corrosion handbook, R. W. Revie, ed., John Wiley & Sons, New York, 137–164.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Jun 7, 2017
Accepted: Nov 22, 2017
Published online: Mar 16, 2018
Published in print: Jun 1, 2018
Discussion open until: Aug 16, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.