Feasible Range for Midtower Lateral Stiffness in Three-Tower Suspension Bridges
Publication: Journal of Bridge Engineering
Volume 23, Issue 3
Abstract
This study investigates the structural characteristics of midtowers in three-tower suspension bridges and proposes a direct approach to determining feasible midtower stiffness for preliminary designs. The lateral stiffness analysis of bridges demonstrates the feasible midtower stiffness is located in a range that can be obtained using a simplified multispan suspension bridge model. This study also defines dimensionless midtower stiffness, and a parametric analysis is carried out in it to examine the effects of different parameters, including the sag-to-span ratio, side-to-main span ratio, dead-to-live load ratio, span length, and traffic load, on the range of dimensionless midtower stiffness. The results illustrate that the range of dimensionless midtower stiffness relies mainly on the dead-to-live load ratio and the sag-to-span ratio. The dimensionless stiffness chart derived from the study is generic and provides an estimate of the feasible midtower stiffness of three-tower suspension bridges with different design parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the financial support of the Fundamental Research Funds for the Central Universities-China (WUT: 2015IVA015) and the National Natural Science Foundation of China (Grants 51708436, 51408249, and 51608408).
References
Cao, H., Chen, Z., Wu, Q., Zhu, H., and Kang, J. (2016). “A simplified model for multi-span suspension bridges based on single cable theory.” China J. Highway Transp., 29(4), 77–84. (In Chinese)
Cao, H., Zhou, Y.-L., Chen, Z., and Abdel Wahab, M. (2017). “Form-finding analysis of suspension bridges using an explicit iterative approach.” Struct. Eng. Mech., 62(1), 85–95.
CCCC Highway Consultants Co., Ltd. (2015a). “General specifications for the design of highway bridges and culverts.” JTG-D60-2015, China Communications Press, Beijing.
CCCC Highway Consultants Co., Ltd. (2015b). “Specifications for the design of highway suspension bridges.” JTG/T-D65-05-2015, China Communications Press, Beijing.
Chai, S.-B., Xiao, R.-C., Zhang, X.-Y., and Xie, Y.-Z. (2012). “Study of longitudinal stiffness of middle pylon in multi-span suspension bridge.” China J. Highway Transp., 25(2), 67–71 (in Chinese).
Chai, S., Xiao, R., and Wang, X. (2016). “Approximate calculation for deformation of multi-tower suspension bridges.” Struct. Eng. Int., 26(1), 45–51.
Chen, Z., Cao, H., Ye, K., Zhu, H., and Li, S. (2015). “Improved particle swarm optimization-based form-finding method for suspension bridge installation analysis.” J. Comput. Civil Eng., 04014047.
Chen, Z., Cao, H., Zhu, H., Hu, J., and Li, S. (2014). “A simplified structural mechanics model for cable-truss footbridges and its implications for preliminary design.” Eng. Struct., 68, 121–133.
Choi, D.-H., Gwon, S.-G., and Na, H.-S. (2014). “Simplified analysis for preliminary design of towers in suspension bridges.” J. Bridge Eng., 04013007.
Choi, D.-H., Gwon, S.-G., Yoo, H., and Na, H.-S. (2013). “Nonlinear static analysis of continuous multi-span suspension bridges.” Int. J. Steel Struct., 13(1), 103–115.
Collings, D. (2016). “Multiple-span suspension bridges: State of the art.” Proc., Institution of Civil Engineers-Bridge Engineering, 169, Thomas Telford, 215–231.
Forsberg, T. (2001). “Multi-span suspension bridges.” Int. J. Steel Struct., 1(1), 63–73.
Gimsing, N. J., and Georgakis, C. T. (2012). Cable supported bridges: Concept and design, 3rd Ed., John Wiley & Sons, Hoboken, NJ.
Gwon, S.-G., Yoo, H., and Choi, D.-H. (2014). “Effects of flexural rigidity of center tower in four-span suspension bridges.” J. Korean Soc. Civ. Eng., 34(1), 49–60.
Jung, J., Kim, J., Baek, J., and Choi, H. (2010). “Practical design of continuous two main-span suspension bridge in Korea.” Proc., IABSE Symp. Rep., International Association for Bridge and Structural Engineering, Zurich, Switzerland.
Kim, H. S., Sohn, Y. K. and Yoo, D. H. (2012). “Parametric study on safety factor for cable slip in four-span suspension bridges.” IABSE Congress Rep., Int. Assoc. for Bridge and Structural Engineering, Zurich, Switzerland, 1560–1567.
Liang, P., Wu, X. N., and Xu, Y. (2010). “Static and dynamic behaviours of three-tower suspension bridges and the structure selection of the mid-tower.” Adv. Mater. Res., Trans. Tech. Publ., 163–167, 2343–2349.
Ma, X., Nie, J., and Fan, J. (2016). “Longitudinal stiffness of multispan suspension bridges.” J. Bridge Eng., 06015010.
Qiang, Z., He-qiang, T., and Guang-wu, Y. (2012). “Selection of a structural system for a three-tower suspension bridge of Maanshan Yangtze River Highway Bridge.” Struct. Eng. Int., 22(1), 139–143.
Ruan, X., Zhou, J., and Caprani, C. C. (2016). “Safety assessment of the antisliding between the main cable and middle saddle of a three-pylon suspension bridge considering traffic load modeling.” J. Bridge Eng., 04016069.
Shen, R., Zhang, X., and Peng, D. (2016). “Practical calculation method for structural deformation of multi-span suspension bridge.” China J. Highway Transp., 29(6), 207–213 (in Chinese).
Takena, K., Sasaki, M., Hata, K., and Hasegawa, K. (1992). “Slip behavior of cable against saddle in suspension bridges.” J. Struct. Eng., 377–391.
Wang, X., Chai, S., and Xu, Y. (2016). “Deformation characteristics of double-cable multispan suspension bridges.” J. Bridge Eng., 06015007.
Wang, X., Chai, S., and Xu, Y. (2017). “Sliding resistance of main cables in double-cable multispan suspension bridges.” J. Bridge Eng., 06016011.
Yoshida, O., Okuda, M., and Moriya, T. (2004). “Structural characteristics and applicability of four-span suspension bridge.” J. Bridge Eng., 453–463.
Zhang, Q., Cheng, Z., Cui, C., Bao, Y., He, J., and Li, Q. (2017). “Analytical model for frictional resistance between cable and saddle of suspension bridges equipped with vertical friction plates.” J. Bridge Eng., 04016103.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Apr 28, 2017
Accepted: Sep 11, 2017
Published online: Dec 18, 2017
Published in print: Mar 1, 2018
Discussion open until: May 18, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.