Energy Expenditure in Curved Open Channels
Publication: Journal of Hydraulic Engineering
Volume 109, Issue 7
Abstract
This paper describes linear partitioning of energy expenditure in curved open channels. An analytical method which predicts energy losses due to longitudinal resistance and transverse circulation is presented; predicted results are compared with measurements. The transverse energy loss is evaluated using the velocity field of transverse circulation which is implicitly dependent on the internal turbulent shear and boundary roughness; thus, direct evaluations of the shear and boundary losses are avoided. Transverse circulation is often referred to as secondary circulation as its velocity component is generally substantially lower than the longitudinal or primary velocity. Such is not the case for the energy expenditure. The loss due to transverse circulation may be of the same order of magnitude as the longitudinal loss at a higher depth to radius ratio or lower channel roughness, or both.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al‐Shaikh Ali, K. S., “Flow Dynamics in Trapezoidal Open Channel Bends,” thesis presented to Colorado State University, at Ft. Collins, Colo., in 1964, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
2.
Bakhmeteff, B. A., and Allen, W., “The Mechanism of Energy Loss in Fluid Friction,” Proceedings, ASCE, Vol. 71, No. 2, Feb., 1945, pp. 129–166.
3.
Bagnold, R. A., “Some Aspects of the Shape of River Meanders,” U.S. Geological Survey Professional Paper 282‐E, U.S. Geological Survey, Washington, D.C., 1960.
4.
Chow, V. T., Open Channel Hydraulics, McGraw‐Hill, New York, N.Y., 1959.
5.
Engelund, F., “Flow and Bed Topography in Channel Bends,” Journal of the Hydraulics Division, ASCE, Vol. 100, No. HY11, Nov., 1974, pp. 1631–48.
6.
Hayat, S., “The Variation of Loss Coefficient with Froude Number in an Open Channel Bend,” thesis presented to the University of Iowa, at Iowa City, Iowa, in 1965, in partial fulfillment of the requirements for the degree of Master of Science.
7.
Ippen, A. T., and Drinker, P. A., “Boundary Shear Stresses in Curved Trapezoidal Channels,” Journal of the Hydraulics Division, ASCE, Vol. 88, No. HY5, Sept., 1962, pp. 143–179.
8.
Kikkawa, H., Ikeda, S., and Kitagawa, A., “Flow and Bed Topography in Curved Open Channels,” Journal of the Hydraulics Division, ASCE, Vol. 102, No. HY9, Sept., 1976, pp. 1327–42.
9.
Leopold, L. B., Bagnold, R. A., Wolman, M. G., and Brush, L. M., Jr., “Flow Resistance in Sinuous or Irregular Channels,” U.S. Geological Survey Professional Paper 282‐D, U.S. Geological Survey, Washington, D.C., 1960.
10.
Leopold, L. B., Wolman, M. G., and Miller, J. P., Fluvial Processes in Geomorphology, W. H. Freeman & Co., San Francisco, Calif., 1964.
11.
Odgaard, A. J., “Transverse Bed Slope in Alluvial Channel Bends,” Journal of the Hydraulics Division, ASCE, Vol. 107, No. HY12, Dec., 1981, pp. 1677–94.
12.
Rozovskii, I. L., “Flow of Water in Bends of Open Channels,” Israel Program for Scientific Translations, Jerusalem, Israel, 1961 (available from Office of Technical Services, U.S. Department of Commerce, Washington, D.C., PST Catalog No. 363, OTS 60‐51133).
13.
System Scientific 360 Subroutine Package, 5th ed., International Business Machines Corp., Armonk, N.Y., Aug., 1970.
14.
Soliman, M. M., and Tinney, E. R., “Flow Around 180° Bends in Open Rectangular Channels,” Journal of the Hydraulics Division, ASCE, Vol. 94, No. HY4, Proc. Paper 6027, July, 1968, pp. 893–908.
15.
Toebes, G. H., and Sooky, A. A., “Hydraulics of Meandering Rivers with Flood Plains,” presented at the May 16–20, 1966, ASCE Water Resources Engineering Conference, held at Denver, Colo. (Preprint 351).
16.
Yen, B. C., “Characteristics of Subcritical Flow in a Meandering Channel,” Institute of Hydraulic Research, the University of Iowa, Iowa City, Iowa, 1965.
17.
Yen, B. C., “Spiral Motion of Developed Flow in Wide Curved Open Channels,” Sedimentation (Einstein), H. W. Shen, ed., P.O. Box 606, Ft. Collins, Colo., 1972.
18.
Zimmermann, C., and Kennedy, J. F., “Transverse Bed Slopes in Curved Alluvial Streams,” Journal of the Hydraulics Division, ASCE, Vol. 104, No. HY1, Proc. Paper 13482, Jan., 1978, pp. 33–48.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Jul 1, 1983
Published in print: Jul 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.