Flow Resistance in Large Test Channel
Publication: Journal of Hydraulic Engineering
Volume 109, Issue 12
Abstract
Experiments in a large test channel defined friction factors for equilibrium flows up to 150 cfs over a sand bed. Although the friction factors were generally higher than those predicted by either of the three most cited published procedures, they were consistent with published data from smaller flumes with similar sand as the bed material. The Froude number seemed to unify the data into a single average trend. Correlations between the friction factor for flat bed flows and the Reynolds number and relative sand‐grain roughness were also shown to embody a strong Froude number dependency with only minor Reynolds number effect. Division of the total friction factors into components associated with the channel walls, sand grain resistance, and bed form resistance did not improve correlations with the Froude number. The apparent absence of Reynolds number effect in correlation of the friction factor with Froude number may not be general for finer sediments and an extended range of Reynolds numbers. A transformation of the Alam/Kennedy friction diagram for bed forms suggests a decrease in friction factor for finer sands or larger Reynolds numbers or both.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alam, A. M. Z., and Kennedy, J. F., “Friction Factors for Flow in Sand‐Bed Channels,” Journal of the Hydraulics Division, ASCE, Vol. 95, No. HY6, Proc. Paper 6900, 1969, pp. 1973–1992.
2.
Einstein, H. A., “The Bed‐Load Function for Sediment Transportation in Open Channel Flows,” SCS Technical Bulletin 1026, 1950.
3.
Einstein, H. A., and Barbarossa, N. L., “River‐Channel Roughness,” Transactions, ASCE, Vol. 117, 1952, pp. 1121–1132.
4.
Engelund, F., Closure to “Hydraulic Resistance of Alluvial Streams,” Journal of the Hydraulics Division, ASCE, Vol. 93, No. HY4, Proc. Paper 4739, July, 1967, pp. 287–296.
5.
Guy, H. P., Simons, D. B., and Richardson, E. V., “Summary of Alluvial Channel Data from Flume Experiments,” USGS Professional Paper 462‐I, 1966.
6.
Johnson, J. W., “The Importance of Considering Side‐Wall Friction in Bed‐Load Investigations,” Civil Engineering, Vol. 12, 1942, pp. 329–331.
7.
Kennedy, J. F., “Stationary Waves and Antidunes in Alluvial Channels,” W. M. Keck Laboratory Report No. KH‐R‐2, California Institute of Technology, Pasadena, Calif., Jan., 1961, p. 110.
8.
Lovera, F., and Kennedy, J. F., “Friction Factors for Flat‐Bed Flows in Sand Channels,” Journal of the Hydraulics Division, ASCE, Vol. 95, No. HY4, Proc. Paper 6678, July, 1969, pp. 1227–1234.
9.
Schlichting, H., Boundary Layer Theory, 6th ed., McGraw‐Hill Book Co., New York, N.Y., 1968, pp. 560–595.
10.
“Sediment Transportation Mechanics: F. Hydraulic Relations for Alluvial Streams,” Task Committee for Preparation of the Sedimentation Manual, Journal of the Hydraulics Division, ASCE, Vol. 97, No. HY1, Proc. Paper 7786, Jan., 1971, pp. 101–141.
11.
Vanoni, V. A., and Brooks, N. H., “Laboratory Studies of the Roughness and Suspended Load of Alluvial Streams,” Sedimentation Laboratory Report No. E‐68, California Institute of Technology, Pasadena, Calif., Dec., 1957.
12.
Willis, J. C., “Migrating Sedimentary Waves in a Large Test Channel,” Computational Methods and Experimental Measurements, Proceedings of the International Conference, Washington, D.C., July, 1982, pp. 609–622.
13.
Willis, J. C., and Coleman, N. L., “Unification of Data on Sediment Transport in Flumes by Similitude Principles,” Water Resources Research, Vol. 5, No. 6, 1969, pp. 1330–1336.
14.
Willis, J. C., and Kennedy, J. F., “Sediment Discharge of Alluvial Streams Calculated from Bed Form Statistics,” Iowa Institute of Hydraulic Research Report No. 202, Iowa City, Iowa, June, 1977, 200 p.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Dec 1, 1983
Published in print: Dec 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.