Measurement of Particle Dynamics in Rapid Granular Shear Flows
Publication: Journal of Engineering Mechanics
Volume 135, Issue 4
Abstract
Micromechanics of rapid granular flows is studied in a two-dimensional planar granular Couette flow apparatus. The device is capable of generating particulate flows at different shearing rates and solid fractions. Monosize plastic disks are sheared across an annular test section for several shear rates. The motion of particles is recorded through a high speed digital camera and analyzed by image processing techniques. The average and fluctuation velocity profiles are obtained and granular temperature relations with shear rate are investigated. Average streaming velocity across the shear cell decays slightly faster than exponential, and is rather Gaussian when not too close to the wall. Fluctuation velocities and granular temperature across the shear cell are related to effective shear rate. Interparticle collisions are estimated from the particle trajectories and probability distribution of collision angles obtained from particle collision data. In dense flows, three peaks of collision angles are observed, which signal the onset of triangular structure formulation and cause crystallization. It is found that the distribution of collision angles is anisotropic.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was performed at the Dept. of Civil and Environmental Engineering, Saitama University, Saitama, Japan. The writers appreciate great help from their colleagues in the experimental work. This research was partially supported by the Japan Society for the Promotion of Science (JSPS), Grant-in-Aid for Scientific Research, Grant No. UNSPECIFIED18560482. Financial support to the first writer provided by the Asian Development Bank (ADB) is also greatly acknowledged. The writers are also grateful to Prof. M. Oda and Prof. K. Tanimoto for their invaluable comments and suggestions on the work.
References
Alam, M., and Luding, S. (2003). “First stress difference and crystallization in a dense sheared granular fluid.” Phys. Fluids, 15(8), 2298–2312.
Bagnold, R. A. (1954). “Experiments on a gravity-free dispersion of large solid spheres in a Newtonian fluid under shear.” Proc. R. Soc. London, Ser. A, 225, 49–63.
Bocquet, L., Losert, W., Schalk, D., Lubensky, T. C., and Gollub, J. P. (2002). “Granular shear flow dynamics and forces: Experiment and continuum theory.” Phys. Rev. E, 65(1), 011307.
Campbell, C. S. (1990). “Rapid granular flows.” Annu. Rev. Fluid Mech., 22, 57–92.
Drake, T. G. (1991). “Granular flow: Physical experiment and their implications for microstructural theories.” J. Fluid Mech., 225, 121–152.
Elliot, K. E., Ahmadi, G., and Kvasnak, W. (1998). “Couette flows of a granular monolayer—An experimental study.” J. Non-Newtonian Fluid Mech., 74(1–3), 89–111.
Haff, P. K. (1986). “A physical picture of kinetic granular fluids.” J. Rheol., 30(5), 931–948.
Hanes, D. M., and Inman, D. L. (1985). “Observations of rapidly flowing granular fluid flow.” J. Fluid Mech., 150, 357–380.
Hsiau, S. S., and Jang, H. W. (1998). “Measurements of velocity fluctuations of granular materials in a shear cell.” Exp. Therm. Fluid Sci., 17(3), 202–209.
Hsiau, S. S., and Shieh, Y. H. (1999). “Fluctuations and self-diffusion of sheared granular material flows.” J. Rheol., 43(5), 1049–1066.
Hsiau, S. S., Wang, P. C., and Tai, C. H. (2002). “Convection cells and segregation in a vibrated granular bed.” AIChE J., 48(7), 1430–1438.
Hsiau, S.-S., and Yang, W.-L. (2005). “Transport property measurements in sheared granular flows.” Chem. Eng. Sci., 60(1), 187–199.
Hunt, M. L., Zenit, R., Campbell, C. S., and Brennen, C. E. (2002). “Revisiting the 1954 suspension experiments of R. A. Bagnold.” J. Fluid Mech., 452, 1–24.
Iwashita, K., Ichiba, K., and Oda, M. (2004). “Observations of rapidly sheared granular materials.” J. JSCE, 764/III-67, 147–156.
Jenkins, J. T., and Richman, M. W. (1985). “Kinetic theory for plane flows of a dense gas of identical, rough, inelastic, circular disks.” Phys. Fluids, 28(12), 3485–3494.
Jenkins, J. T., and Savage, S. B. (1983). “A theory for rapid flow of identical, smooth, nearly elastic spherical particles.” J. Fluid Mech., 130, 187–202.
Johnson, P. C., and Jackson, R. (1987). “Frictional-collisional constitutive relations for granular materials, with application to plane shearing.” J. Fluid Mech., 176, 67–93.
Lun, C. K. K., Savage, S. B., Jeffrey, D. J., and Chepurnity, N. (1984). “Kinetic theories for granular flow: Inelastic particles in Couette flow and slightly inelastic particles in a flow field.” J. Fluid Mech., 140, 233–256.
Midi, G. D. R. (2004). “On dense granular flows.” Eur. Phys. J. E, 14(4), 341–365.
Mueth, D. M. (2003). “Measurements of particle dynamics in slow, dense granular Couette flow.” Phys. Rev. E, 67(1), 011304.
Natarajan, V. V. R., Hunt, M. L., and Taylor, E. D. (1995). “Local measurements of velocity fluctuations and diffusion coefficients for a granular material flow.” J. Fluid Mech., 304, 1–25.
Oda, M., and Iwashita, K., eds. (1999). Mechanics of granular materials, Balkema, Rotterdam, The Netherlands.
Ogawa, S. (1978). “Multi-temperature theory of granular materials.” Proc., US-Japan Seminar on Continuum-Mechanical and Statistical Approaches in the Mechanics of Granular Materials, 208–217.
Savage, S. B., and Jeffrey, D. J. (1981). “The stress tensor in a granular flow at high shear rates.” J. Fluid Mech., 110, 255–272.
Savage, S. B., and Sayed, M. (1984). “Stresses developed by dry cohesionless granular materials in a annular shear cell.” J. Fluid Mech., 142, 391–430.
Veje, C., Howell, D., and Behringer, R. P. (1999). “Kinematics of a two-dimensional granular Couette experiment at the transition to shearing.” Phys. Rev. E, 59(1), 739–745.
Wang, D. G., and Campbell, C. S. (1992). “Reynolds analogy for a shearing granular materials.” J. Fluid Mech., 244, 527–546.
Warr, S., Jacques, G. T. H., and Huntley, J. M. (1994). “Tracking the translational and rotational motion of granular particles: Use of high-speed photography and image processing.” Powder Technol., 81(1), 41–56.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Aug 15, 2007
Accepted: Sep 26, 2008
Published online: Apr 1, 2009
Published in print: Apr 2009
Notes
Note. Associate Editor: Anil Misra
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.