Nonuniform Torsion of Composite Bars by Boundary Element Method
Publication: Journal of Engineering Mechanics
Volume 127, Issue 9
Abstract
In this paper a boundary element method is developed for the nonuniform torsion of composite bars of arbitrary constant cross section. The composite bar consists of a matrix surrounding a finite number of inclusions. The materials have different elasticity and shear moduli and are firmly bonded together. The bar is subjected to an arbitrarily concentrated or distributed twisting moment while its edges are restrained by the most general linear torsional boundary conditions. Because warping is prevented, besides the Saint-Venant torsional shear stresses, the warping normal stresses are also computed. Two boundary-value problems with respect to the variable along the beam angle of twist and to the warping function at the shear center are formulated and solved employing a boundary element method approach. Both the warping and the torsion constants are computed by employing an effective Gaussian integration over domains of arbitrary shape. Numerical results are presented to illustrate the method and demonstrate its efficiency and accuracy. The contribution of the normal stresses caused by restrained warping is investigated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Booker, J. R., and Kitipornchai, S. (1971). “Torsion of multilayered rectangular section.”J. Engrg. Mech. Div., ASCE, 97, 1451–1467.
2.
Bornscheuer, F. W. ( 1952). “Beispiel und Formelsammlung zur Spannungsberechnung Dünnwandiger Stäbe mit Wölbbehindertem Querschnitt.” Der Stahlbau, 21(12), 225–232 (in German).
3.
Bornscheuer, F. W. ( 1953). “Beispiel und Formelsammlung zur Spannungsberechnung Dünnwandiger Stäbe mit Wölbbehindertem Querschnitt.” Der Stahlbau, 22(2), 32–44 (in German).
4.
Chou, S. I., and Mohr, J. A. ( 1990). “Boundary integral method for torsion of composite shafts.” Int. J. Struct. Mech. and Mat. Sci., 29, 41–56.
5.
Cornelius, W. ( 1951). “Über den Einfluss der Torsionssteifigkeit auf die Verdrehung von Tragwerken.” MAN—Forschungsheft, 39–65 (in German).
6.
Ely, J. F., and Zienkiewicz, O. C. ( 1960). “Torsion of compound bars—A relaxation solution.” Int. J. Mech. Sci., 1(4), 356–365.
7.
Friemann, H. ( 1993). Schub und Torsion in gerade Stäben, Werner—Verlag, Düsseldorf, Germany (in German).
8.
Gruttmann, F., Wagner, W., and Sauer, R. ( 1998). “Zur Berechnung von Wölbfunktion und Torsionskennwerten beliebiger Stabquerschnitte mit der Methode der Finiten Elemente.” Bauingenieur, 73(3), 138–143 (in German).
9.
Kappus, R. ( 1937). “Drillknicken zentrisch gedrückter Stäbe mit offenem Profil im elastischen Bereich.” Luftfahrtforschung, 14, 444–457 (in German).
10.
Katsikadelis, J. T., and Sapountzakis, E. J. (1985). “Torsion of composite bars by boundary element method.”J. Engrg. Mech., ASCE, 111(9), 1197–1210.
11.
Kollbrunner, C. F., and Basler, K. ( 1966). Torsion, Springer, Berlin (in German).
12.
Kuo, Y. M., and Conway, H. D. ( 1973). “The torsion of composite tubes and cylinders.” Int. J. Solids and Struct., 9, 1553–1565.
13.
Kuo, Y. M., and Conway, H. D. ( 1974a). “Torsion of a composite cylinder.” J. Appl. Mech. Div., 31, 302–303.
14.
Kuo, Y. M., and Conway, H. D. (1974b). “Torsion of cylinders with multiple reinforcement.”J. Engrg. Mech. Div., ASCE, 100(2), 221–234.
15.
Kuo, Y. M., and Conway, H. D. (1980). “Torsion of reinforced square cylinder.”J. Engrg. Mech. Div., ASCE, 106(6), 1341–1347.
16.
Marguerre, K. ( 1940). “Torsion von Voll—und Hohlquerschnitten.” Der Bauingenieur, 21, 317–322 (in German).
17.
Mehlhorn, G. ( 1970). Ein Beitrag zum Kipp—Problem von Stahlbeton—und Spannbetonträgern, Diss. TH Darmstadt (in German).
18.
Muskhelishvily, N. I. ( 1963). “Chapter 23.” Some basic problems of the mathematical theory of elasticity, P. Noordhoff Ltd., Groningen, The Netherlands.
19.
Packham, B. A., and Shail, R. ( 1978). “St. Venant torsion of composite cylinders.” J. Elasticity, 8, 393–407.
20.
Ramm, E., and Hofmann, T. J. ( 1995). Der Ingenieurbau: Grundwissen—Baustatik/Baudynamik, Ernst & Sohn, Berlin (in German).
21.
Roik, K. H. ( 1978). Vorlesungen über Stahlbau (Grundlagen), Verlag Wilhelm Ernst & Sohn, Berlin (in German).
22.
Roik, K. H., Carl, J., and Linder, J. ( 1972). Biegetorsionsprobleme gerade Dünnwandiger Stäbe, Verlag Wilhelm Ernst & Sohn, Berlin (in German).
23.
Saint-Venant, B. ( 1855). “Memoire sur la torsion des prismes.” Memoires des Savants Etrangers, 14, 233–560 (in French).
24.
Sapountzakis, E. J. ( 2000). “Solution of nonuniform torsion of bars by an integral equation method.” Int. J. Comp. Struct., 77, 659–667.
25.
Sapountzakis, E. J., and Katsikadelis, J. T. (1991). “Boundary element solution for plates of variable thickness.”J. Engrg. Mech., ASCE, 117(6), 1241–1256.
26.
Shams-Ahmadi, M., and Chou, S. I. ( 1997). “Complex variable boundary element method for torsion of composite shafts.” Int. J. Numer. Methods in Engrg., 40, 1165–1179.
Information & Authors
Information
Published In
History
Received: Apr 30, 1999
Published online: Sep 1, 2001
Published in print: Sep 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.