Analysis of Shear Banding in True Triaxial Tests on Sand
This article has a reply.
VIEW THE REPLYPublication: Journal of Engineering Mechanics
Volume 127, Issue 8
Abstract
A series of true triaxial tests have been performed on rectangular prismatic specimens of Santa Monica Beach sand at three different relative densities to study the occurrence of failure, mechanisms that create failure, and soil behavior in the vicinity of failure. One mechanism is smooth peak failure, in which the soil continues to behave as a continuum with uniform strains, and smooth peak failure is followed by strain softening. Another mechanism is shear banding, whose occurrence in the plastic hardening regime limits the strength of the soil. Presented here are analyses based on theoretical conditions for localization and subsequent shear banding and on the results of the true triaxial tests. Thus, the strength increases as b [=(σ2 − σ3)/(σ1 − σ3)] increases from 0 to about 0.18, remains almost constant until b reaches 0.85, and then decreases slightly at b = 1.0. Shear banding initiates in the hardening regime for b-values of 0.18–0.85. Thus, peak failure is caused by shear banding in this middle range of b-values, and a smooth, continuous 3D failure surface is therefore not generally obtained for soils. The experimental results agree with the theoretical conditions for the occurrence of shear banding and its consequent effect on the 3D failure stress states for soil.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arthur, J. R. F., and Dunstan, T. ( 1982). “Rupture layers in granular media.” Proc., IUTAM Symp. on Deformation and Failure of Granular Mat., P. A. Vermeer and H. J. Luger, eds., Balkema, Rotterdam, The Netherlands, 453–459.
2.
Arthur, J. R. F., Dunstan, T., Al-Ani, Q. A. J. L., and Assadi, A. ( 1977). “Plastic deformation and failure in granular media.” Géotechnique, London, 27(1), 53–74.
3.
Desrues, J., Chambon, R., Mokni, M., and Mazerolle, F. ( 1996). “Void ratio evolution inside shear bands in triaxial sand specimens studied by computed tomography.” Géotechnique, London, 46(3), 529–546.
4.
Desrues, J., Lanier, J., and Stutz, P. ( 1985). “Localization of the deformation in tests on sand sample.” Engrg. Fracture Mech., 21(4), 909–921.
5.
Ergun, M. U. ( 1981). “Evaluation of three-dimensional shear testing.” Proc., 10th Int. Conf. on Soil Mech. and Found. Engrg., Vol. 4, 593–596.
6.
Finno, R. J., Harris, W. W., Mooney, M. A., and Viggiani, G. (1996). “Strain localization and undrained steady state of sand.”J. Geotech. Engrg., ASCE, 122(6), 462–473.
7.
Finno, R. J., Harris, W. W., Mooney, M. A., and Viggiani, G. ( 1997). “Shear bands in plane strain compression of loose sand.” Géotechnique, London, 47(1), 149–165.
8.
Green, G. E., and Bishop, A. W. ( 1969). “A note on the drained strength of sand under generalized strain conditions.” Géotechnique, London, 19, 144–149.
9.
Hansen, B. ( 1958). “Line ruptures regarded as narrow rupture zones—Basic equations based on kinematic considerations.” Proc., Brussels Conf. on Earth Pressure Problems, Vol. 1, 39–48.
10.
Lade, P. V. ( 1977). “Elasto-plastic stress-strain theory for cohesionless soil with curved yield surfaces.” Int. J. Solids and Struct., 13, 1019–1035.
11.
Lade, P. V., and Duncan, J. M. (1973). “Cubical triaxial tests on cohesionless soils.”J. Soil Mech. and Found. Div., ASCE, 99(10), 793–812.
12.
Lade, P. V., and Kim, M. K. ( 1988). “Single hardening constitutive model for frictional materials II. Yield criterion and plastic work contours.” Comp. and Geotechnics, 6, 13–29.
13.
Lade, P. V., and Kim, M. K. ( 1995). “Single hardening constitutive model for soil, rock and concrete.” Int. J. Solids and Struct., 32(14), 1963–1978.
14.
Lade, P. V., and Nelson, R. B. ( 1987). “Modeling the elastic behavior of granular materials.” Int. J. Numer. and Analytical Methods in Geomechanics, 11, 521–542.
15.
Molenkamp, F. ( 1985). “Comparison of frictional material models with respect to shear band initiation.” Géotechnique, London, 35(2), 127–143.
16.
Peric, D., Runesson, K., and Sture, S. (1992). “Evaluation of plastic bifurcation for plane strain versus axisymmetry.”J. Engrg. Mech., ASCE, 118(3), 512–524.
17.
Peters, J. F., Lade, P. V., and Bro, A. ( 1988). “Shear band formation in triaxial and plane strain tests.” Advanced triaxial testing of soil and rock, ASTM STP No. 977, R. T. Donaghe, R. C. Chaney, and M. L. Silver, eds., ASTM, West Conshohocken, Pa., 604–627.
18.
Procter, D. C., and Barden, L. ( 1969). “Correspondence on `A note on the drained strength of sand under generalized strain conditions,' by Green and Bishop.” Géotechnique, London, 19(3), 424–426.
19.
Reades, D. W., and Green, G. E. ( 1976). “Independent stress control and triaxial extension tests on sand.” Géotechnique, London, 26(4), 551–576.
20.
Rice, J. R. ( 1976). “The localization of plastic deformation.” Proc., 4th Conf. on Theoretical and Appl. Mech., W. T. Koiter, ed., North-Holland, Amsterdam, 207–229.
21.
Roscoe, K. H. ( 1970). “The influence of strains in soil mechanics.” Géotechnique, London, 20(2), 129–170.
22.
Rudnicki, J. W., and Rice, J. R. ( 1975). “Conditions for the localization of deformation in pressure-sensitive dilatant materials.” J. Mech. Phys. Solids, 23, 371–394.
23.
Scarpelli, G., and Wood, D. M. ( 1982). “Experimental observations of shear band patterns in direct shear tests.” Proc., IUTAM Symp. on Deformation and Failure of Granular Mat., P. A. Vermeer and H. J. Luger, eds., Balkema, Rotterdam, The Netherlands, 473–484.
24.
Vardoulakis, I. ( 1980). “Shear band inclination and shear modulus of sand in biaxial tests.” Int. J. Numer. and Analytical Methods in Geomechanics, 4, 103–119.
25.
Vermeer, P. A. ( 1982). “A simple shear-band analysis using compliances.” Proc., IUTAM Symp. on Deformation and Failure of Granular Mat., P. A. Vermeer and H. J. Luger, eds., Balkema, Rotterdam, The Netherlands, 493–499.
26.
Vermeer, P. A. ( 1990). “The orientation of shear bands in biaxial tests.” Géotechnique, London, 40(2), 223–236.
27.
Wang, Q., and Lade, P. V. (2001). “Shear banding in true triaxial tests and its effect on failure in sand.”J. Engrg. Mech., ASCE, 127(8), 754–761.
28.
Yoshida, T., Tatsuoka, F., Siddiquee, M. S. A., Kamegai, Y., and Park, C.-S. ( 1993). “Shear banding in sands observed in plane strain compression.” Proc., 3rd Int. Workshop Localisation and Bifurcation Theory for Soils and Rocks, Balkema, Rotterdam, The Netherlands, 165–179.
Information & Authors
Information
Published In
History
Received: Nov 15, 2000
Published online: Aug 1, 2001
Published in print: Aug 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.