Uncertainty in Mechanics Problems—Interval–Based Approach
Publication: Journal of Engineering Mechanics
Volume 127, Issue 6
Abstract
This paper presents a nontraditional uncertainty treatment for mechanics problems. Uncertainties are introduced as bounded possible values (intervals). Interval finite-element methods, developed by the authors, are used in the present formulation. To account for different types of uncertainties in linear static problems an interval linear system of equations is developed. A guaranteed enclosure for the solution of interval linear system of equations is achievable and usually is not sharp and very conservative; however, an exact enclosure is not known to be obtained in the general case of such systems. In this work, a very sharp enclosure for the solution set, due to loading, material and geometric uncertainty in solid mechanics problems, is obtained. The new formulation is based on an element-by-element technique. Element matrices are formulated, based on the physics of materials, and the Lagrange multiplier method is applied to impose the necessary constraints for compatibility and equilibrium. Most sources of overestimation were eliminated, and a very sharp solution is obtained. A number of numerical examples are introduced.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abdel-Tawab, K., and Noor, A. K. ( 1999). “A fuzzy-set analysis for a dynamic thermoelasto-viscoplastic damage response.” Comp. and Struct., 70, 91–107.
2.
Alefeld, G., and Herzberger, J. ( 1983). Introduction to interval computations, Academic, New York.
3.
Apostolatos, N., and Kulisch, U. ( 1968). “Grundzüge einer Intervallrechtung für Matrizen und einige Anwwendungen, Elektron. Rechenanlagen, 10, 73–83 (in German).
4.
Bathe, K. ( 1996). Finite element procedures, Prentice-Hall, Upper Saddle River, N.J.
5.
Dwyer, P. S., ed. ( 1951). Computation with approximate numbers, linear computations, Wiley, New York, 11–34.
6.
Gallagher, R. H. ( 1975). Finite element analysis fundamentals, Prentice Hall, Englewood Cliffs, N.J.
7.
Gay, D. M. ( 1982). “Solving interval linear equations.” SIAM J. Numer. Anal., 19(4), 858–870.
8.
Hansen, E. ( 1965). “Interval arithmetic in matrix computation.” SIAM J., Numer. Anal., I(2), 308–320.
9.
Hansen, E. ( 1992). Global optimization using interval analysis, Marcel Dekker, New York.
10.
Jansson, C. ( 1991). “Interval linear system with symmetric matrices, skew-symmetric matrices, and dependencies in the right hand side.” Computing, 46, 265–274.
11.
Köylüoglu, H. U., and Elishakoff, I. ( 1998). “A comparison of stochastic and interval finite elements applied to shear frames with uncertain stiffness properties.” Comp. and Struct., 67(1–3), 91–98.
12.
Köylüoglu, H. U., Cakmak, A. S., and Nielsen, S. R. K. (1995). “Interval algebra to deal with pattern loading and structural uncertainty.”J. Engrg. Mech., ASCE, 121(11), 1149–1157.
13.
Mayer, O. ( 1970). “Algebraische und metrische Strukturen in der Intervallrechung und eingine Anwendungen.” Computing, 5, 144–162 (in German).
14.
Moore, R. E. ( 1966). Interval analysis, Prentice-Hall, Englewood Cliffs, N.J.
15.
Moore, R. E. ( 1979). Methods and applicaitons of interval analysis, SIAM, Philadelphia.
16.
Muhanna, R. L., and Mullen, R. L. ( 1995). “Development of interval based methods for fuzziness in continuum mechanics.” Proc., ISUMA-NAFIPS '95, 145–150.
17.
Muhanna, R. L., and Mullen, R. L. ( 1999). “Formulation of fuzzy finite element methods for mechanics problems.” Comp.-Aided Civ. and Infrastructure Engrg., 14, 107–117.
18.
Mullen, R. L., and Muhanna, R. L. ( 1996). “Structural analysis with fuzzy-based load uncertainty.” Proc., 7th ASCE EMD/STD Joint Spec. Conf. on Probabilistic Mech. and Struct. Reliability, Mass., 310–313.
19.
Mullen, R. L., and Muhanna, R. L. (1999). “Bounds of structural response for all possible loadings.”J. Struct. Engrg., ASCE, 125(1), 98–106.
20.
Nakagiri, S., and Suzuki, K. ( 1999). “Finite element interval analysis of external loads identified by displacement input uncertainty.” Comput. Methods Appl. Mech. Engrg., 168, 63–72.
21.
Nakagiri, S., and Yoshikawa, N. ( 1996). “Finite element interval estimation by convex model.” Proc., 7th ASCE EMD/STD Joint Spec. Conf. on Probabilistic Mech. and Struct. Reliability, WPI, Mass., 278–281.
22.
Neumaier, A. ( 1987). “Overestimation in linear interval equations.” SIAM J. Num. Anal., 24(1), 207–214.
23.
Neumaier, A. ( 1989). “Rigorous sensitivity analysis for parameter-dependent systems of equations.” J. Math. Anal. and Applications, 144, 16–25.
24.
Neumaier, A. ( 1990). Interval methods for systems of equations, Cambridge University Press, New York.
25.
Oettl, W. ( 1965). “On the solution set of a linear system with inaccurate coefficients,” SIAM J. Num. Anal., 2(1), 115–118.
26.
Rao, S. S., and Berke, L. ( 1997). “Analysis of uncertain structural systems using interval analysis.” AIAA J., 35(4), 727–735.
27.
Rao, S. S., and Chen, Li. ( 1998). “Numerical solution of fuzzy linear equations in engineering analysis.” Int. J. Numer. Methods in Engrg., 43, 391–408.
28.
Rao, S. S., and Sawyer, P. ( 1995). “Fuzzy finite element approach for analysis of imprecisely defined systems.” AIAA J., 33(12), 2364–2370.
29.
Rump, S. M. ( 1990). “Rigorous sensitivity analysis for systems of linear and nonlinear equations.” Math. of Computations, 54(190), 721–736.
30.
Sunaga, T. ( 1958). “Theory of interval algebra and its application to numerical analysis.” RAAG Memoirs 3, 29–46.
31.
Tonon, F., and Bernardini, A. ( 1999). “Multiobjective optimization of uncertain structures through fuzzy set and random set theory.” Comp.-Aided Civ. and Infrastructure Engrg., 14,
32.
Zadeh, L. A. ( 1965). “Fuzzy sets.” Information and Control, 8, 338–353.
33.
Zadeh, L. A. ( 1978). “Fuzzy sets as a basis for a theory of possibility.” Fuzzy Sets and Systems, 1, 3–28.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 127 • Issue 6 • June 2001
Pages: 557 - 566
History
Received: May 8, 2000
Published online: Jun 1, 2001
Published in print: Jun 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.