Effects of Size and Slenderness on Ductility of Fracturing Structures
Publication: Journal of Engineering Mechanics
Volume 125, Issue 3
Abstract
The ductility of an elastic structure with a growing crack may be defined as the ratio of the additional load-point displacement that is caused by the crack at the moment of loss of stability under displacement control to the elastic displacement at no crack at the moment of peak load. The stability loss at displacement control is known to occur when the load-deflection curve of the whole structural system with the loading device (characterized by a spring) reaches a snapback point. Based on the known stress intensity factor as a function of crack length, the well-known method of linear elastic fracture mechanics is used to calculate the load-deflection curve and determine the states of snapback and maximum loads. An example of a notched three-point bend beam with a growing crack is analyzed numerically. The ductility is determined and its dependence of the structure size, slenderness, and stiffness of the loading device is clarified. The family of the curves of ductility versus structure size at various loading device stiffnesses is found to exhibit at a certain critical stiffness a transition from bounded single-valued functions of D to unbounded two-valued functions of D. The method of solution is general and is applicable to cracked structures of any shape. The flexibility (force) method can be adapted to extend the ductility analysis to structural assemblages provided that the stress intensity factor of the cracked structural part considered alone is known. This study leads to an improved understanding of ductility, which should be useful mainly for design against dynamic loads.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P. (1976). “Instability, ductility, and size effect in strain-softening concrete.”J. Engrg. Mech. Div., ASCE, 102(2), 331–344.
2.
Bažant, Z. P. ( 1987). “Snapback instability at crack ligament tearing and its implication for fracture micromechanics.” Cement and Concrete Res., 17, 951–967.
3.
Bažant, Z. P. (1988). “Stable states and paths of structures with plasticity or damage.”J. Engrg. Mech., ASCE, 114(12), 2013–2034.
4.
Bažant, Z. P., and Cedolin, L. ( 1991). Stability of structures: elastic, inelastic, fracture and damage theories. Oxford University Press, New York.
5.
Bažant, Z. P., Gettu, R., and Kazemi, M. T. ( 1991). “Identification of nonlinear fracture properties from size effect tests and structural analysis based on geometry-dependent R-curves.” Int. J. Rock Mech. Mat. Sci. & Geomech. Abstr., 28(1), 43–51.
6.
Bažant, Z. P., and Kazemi, M. T. ( 1990). “Determination of fracture energy, process zone length and brittleness number from size effect, with application to rock and concrete.” Int. J. Fracture, 44, 111–131.
7.
Bažant, Z. P., Kim, J. K., and Pfeiffer, P. A. (1986). “Nonlinear fracture properties from size effect tests.”J. Struct. Engrg., ASCE, 112, 289– 307.
8.
Bažant, Z. P., and Li, Y.-N. ( 1995a). “Stability of cohesive crack model: Part I—Energy principles.” J. Appl. Mech., 62(Dec.), 959–964.
9.
Bažant, Z. P., and Li, Y.-N. ( 1995b). “Stability of cohesive crack model: Part II—Eigenvalue analysis of size effect on strength and ductility of structures.” J. Appl. Mech., 62(Dec.), 965–969.
10.
Bažant, Z. P., and Pfeiffer, P. A. ( 1987). “Determination of fracture energy from size effect and brittleness number.” ACI Mat. J., 84, 463–480.
11.
Bažant, Z. P., Pijaudier-Cabot, G., and Pan, J.-Y. (1987). “Ductility, snapback, size effect and redistribution in softening beams and frames.”J. Struct. Engrg., ASCE, 113(12), 2348–2364.
12.
Bažant, Z. P., and Planas, J. ( 1998). Fracture and size effect in concrete and other quasibrittle materials. CRC, Boca Raton, Fla., and London.
13.
Darvall, P. LeP. ( 1983). “Critical softening of hinges in indeterminate beams and portal frames.” Civ. Engrg. Trans., 25(3), I. E. Australia, Clayton, Australia, 199–210.
14.
Darvall, P. LeP. (1984). “Critical softening of hinges in portal frames.”J. Struct. Engrg., ASCE, 110(1), 157–162.
15.
Darvall, P. LeP. (1985). “Elastic-plastic-softening analysis of plane frame.”J. Struct. Engrg., ASCE, 114(4), 871–888.
16.
Hand, F. R., Pecknold, D. A., and Schnobrich, W. C. (1973). “Nonlinear layered analysis of RC plates and shells.”J. Struct. Div., ASCE, 99(7), 1491–1505.
17.
Lin, C. S., and Scordelis, A. (1975). “Nonlinear analysis of RC shells of general form.”J. Struct. Div., ASCE, 101(3), 523–538.
18.
Maier, G. ( 1967a). “On elastic-plastic structures with associated stress-strain relations allowing for work softening.” Meccanica, 2(1), 55–64.
19.
Maier, G. ( 1967b). “Extremum theorems for the analysis of elastic plastic structures containing unstable elements.” Meccanica, 2(1), 55–64.
20.
Maier, G. ( 1971a). “On structural stability due to strain-softening.” Proc., IUTAM Symp. on Instability of Continuous Sys., Springer, Berlin, 411–417.
21.
Maier, G. ( 1971b). “Incremental plastic analysis in the presence of large displacements and physical instabilizing effects.” Int. J. of Solids and Struct., 7, 345–372.
22.
Maier, G., Zavelani, A., and Dotreppe, J. C. (1973). “Equilibrium branching due to flexural softening.”J. Engrg. Mech. Div., ASCE, 99(4), 897–901.
23.
Mróz, Z. ( 1985). “Current problems and new directions in mechanics of geomaterials.” Mechanics of geomaterials: Rocks, concretes, soils, Z. P. Bažant, ed., Chapter 24, Wiley, Chichester, England, and New York, 534–566.
24.
Murakami, Y. ( 1987). Stress intensity factors handbook. Pergamon, London.
25.
Schnobrich, W. C. ( 1982). “Concrete cracking.” Finite element analysis of reinforced concrete (state-of-the-art report), Chapter 4, ASCE, New York, 204–233.
26.
Tada, H., Paris, P. C., and Irwin, G. R. ( 1985). The stress analysis of cracks handbook, 2nd Ed., Paris Productions, Inc., St. Louis.
27.
Warner, R. F. ( 1984). “Computer simulation of the collapse behavior of concrete structures with limited ductility.” Proc., Int. Conf. Comp.-Aided Analysis and Des. of Concrete Struct., F. Damjanic, E. Hinton, et al., eds., Pineridge, Swansea, U.K., 1257–1270.
28.
Wood, R. H. ( 1968). “Some controversial and curious developments in the plastic theory of structures.” Engineering plasticity, J. Heyman and F. A. Leckie, eds., Cambridge University Press, Cambridge, England, 665–691.
Information & Authors
Information
Published In
History
Received: Apr 1, 1998
Published online: Mar 1, 1999
Published in print: Mar 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.