Scale-Model Studies of Mixing in Drinking Water Storage Tanks
Publication: Journal of Environmental Engineering
Volume 125, Issue 8
Abstract
Storage tanks and reservoirs are commonly used in drinking water distribution systems to equalize pumping requirements and operating pressures, and to provide emergency water for fire-fighting and pumping outages. Poor mixing in these structures can create pockets of older water that could have negative aesthetic and public health impacts. Experiments were conducted on cylindrical scale-model tanks to determine the effect of various factors on mixing. The time taken to mix the contents of a tank with new water introduced during the fill period was found to be proportional to the initial volume to the two-thirds power divided by the square root of the inflow momentum flux (the product of flow rate and velocity). This time is insensitive to whether the inlet is vertically or horizontally oriented. Whether or not complete mixing occurs depends on the ratio of the momentum to buoyancy fluxes of the inlet jet, similar to past findings for jet discharges to unconfined bodies of water. However, the confined geometry of the tank results in a narrower range of conditions that produce stratification. Finally, a formula is derived to estimate the minimum volume exchange required for a fill-and-draw cycle to ensure complete mixing before the end of the filling period.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Boulos, P. F., et al. (1996). “Hydraulic mixing and free chlorine residual in reservoirs.” J. AWWA, 88(7), 48–59.
2.
Fischer, H. B., List, E. J., Koh, R. C. Y., Imberger, J., and Brooks, N. H. (1979). Mixing in inland and coastal waters. Academic, New York.
3.
Fosset, H. ( 1973). “Some observations on the time factor in mixing processes.” Fluid mechanics of mixing. Uram and Goldschmidt, eds., Am. Soc. of Mech. Engrs. (ASME), New York.
4.
Grayman, W. M., and Clark, R. M. (1993). “Using computer models to determine the effect of storage on water quality.” J. AWWA, 85(7), 67–77.
5.
Hyman, D. ( 1962). “Mixing and agitation.” Advances in chemical engineering, T. B. Drew, J. W. Hoopes, Jr., and T. Vermeulen, eds., Vol. 3, Academic, New York.
6.
Kennedy, M. S., Moegling, S., Sarikelle, S., and Suravallop, K. (1993). “Assessing the effects of storage tank design on water quality.” J. AWWA, 85(7), 78–88.
7.
Lee, J. H., and Jirka, G. H. (1981). “Vertical round buoyant jet in shallow water.”J. Hydr. Engrg., ASCE, 107(12), 1651–1675.
8.
McNaughton, K. J., and Sinclair, C. G. (1966). “Submerged jets in short cylindrical flow vessels.” J. Fluid Mech., Cambridge, U.K., 25(2), 367–375.
9.
Okita, N., and Oyama, Y. (1963). “Mixing characteristics in jet mixing.” Japanese Chemical Engrg., 1(1), 94, 101.
10.
Simpson, L. L. ( 1975). “Industrial turbulent mixing.” Turbulence in mixing operations, R. S. Brodkey, ed., Academic, New York.
Information & Authors
Information
Published In
History
Received: Oct 23, 1998
Published online: Aug 1, 1999
Published in print: Aug 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.