Reliability of Fatigue Strength Curves for Riveted Connections Using Normal and Weibull Distribution Functions
This article has been corrected.
VIEW CORRECTIONPublication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 6, Issue 3
Abstract
In North America and Europe, there is a significant number of centenary metallic bridges that require maintenance and strengthening operations. These structures need to be adapted to increasing traffic intensities, and their structural integrity should be constantly evaluated. Fatigue damages were not considered in the original design of old metallic bridges, and riveted connections are one of the most frequent sources of fatigue damages on these structures. This paper intends to be a contribution for the reliable assessment of the fatigue behavior of riveted connections by proposing S-N curves for these structural details. Experimental fatigue data is analyzed from multiple bridges across Europe, and different statistical methods were implemented. A normal distribution function was implemented following the ISO 12107 standard, and the results were compared with the implementation of the two-parameter Weibull distribution function. Different estimation methodologies were implemented to determine the parameters of the Weibull distribution. S-N curves obtained by the statistical analysis were then compared with design recommendations from North American and European standards.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would like to acknowledge the Fundação para a Ciência e Tecnologia (FCT) for funding the scholarships SFRH/BPD/107825/2015 and SFRH/BD/145037/2019. This work was also financed by the following: FEDER funds through the Competitivity Factors Operational Programme–COMPETE, by national funds through FCT within the scope of the project POCI-01-0145-FEDER-007633, and through the Regional Operational Programme CENTRO2020 within the scope of the project CENTRO-01-0145-FEDER-000006; Base Funding–UIDB/04708/2020 and Programmatic Funding–UIDP/04708/2020 of the CONSTRUCT–Instituto de I&D em Estruturas e Construções, funded by national funds through the FCT/MCTES (PIDDAC); and FiberBridge–Fatigue strengthening and assessment of railway metallic bridges using fiber-reinforced polymers (POCI-01-0145-FEDER-030103) by FEDER funds through COMPETE2020 (POCI) and by national funds (PIDDAC) through the Portuguese Science Foundation (FCT/MCTES).
References
AASHTO. 2012. AASHTO LRFD: Bridge design specification. Washington, DC: AASHTO.
Akesson, B. 2010. Fatigue life of riveted steel bridges. Boca Raton, FL: CRC Press.
Barbosa, J. F., R. C. S. F. Júnior, J. A. F. O. Correia, A. M. P. De Jesus, and R. A. B. Calçada. 2018. “Analysis of the fatigue life estimators of the materials using small samples.” J. Strain Anal. Eng. Des. 53 (8): 699–710. https://doi.org/10.1177/0309324718782245.
Ben-Israel, A. 1966. “A Newton-Raphson method for the solution of systems of equations.” J. Math. Anal. Appl. 15 (2): 243–252. https://doi.org/10.1016/0022-247X(66)90115-6.
Bolfarine, H., and M. Sandoval. 2001. Introduction to the statistical inference. [In Portuguese.] São Paulo, Brasil: Sociedade Brasileira de Matemática.
Castillo, E., and A. Fernández-Canteli. 2009. A unified statistical methodology for modeling fatigue damage. New York: Springer.
Castillo, E., M. López-Aenlle, A. Ramos, A. Fernández-Canteli, R. Kieselbach, and V. Esslinger. 2006. “Specimen length effect on parameter estimation in modelling fatigue strength by Weibull distribution.” Int. J. Fatigue 28 (9): 1047–1058. https://doi.org/10.1016/j.ijfatigue.2005.11.006.
CEN (European Committee for Standardization). 2005. Eurocode 3: Design of steel structures. Part 1-9: Fatigue. EN 1993-1-9. Brussels, Belgium: CEN.
Correia, J., A. De Jesus, A. L. L. Silva, and J. N. Silva. 2010. “A procedure to derive probabilistic fatigue strength data for riveted joints.” In Proc., 5th Int. Conf. on Bridge Maintenance, Safety and Management (IABMAS 2010). Boca Raton, FL: CRC Press.
De Jesus, A., A. Da Silva, and J. Correia. 2015. “Fatigue of riveted and bolted joints made of puddle iron—An experimental approach.” J. Constr. Steel Res. 104 (Jan): 81–90. https://doi.org/10.1016/j.jcsr.2014.10.012.
De Jesus, A. M. P., A. L. L. Da Silva, M. V. Figueiredo, J. A. F. O. Correia, A. S. Ribeiro, and A. A. Fernandes. 2011. “Strain-life and crack propagation fatigue data from several Portuguese old metallic riveted bridges.” Eng. Fail. Anal. 18 (1): 148–163. https://doi.org/10.1016/j.engfailanal.2010.08.016.
Di Battista, J., D. Adamson, and G. Kulak. 1998. “Fatigue strength of riveted connections.” J. Struct. Eng. 124 (7): 792–797. https://doi.org/10.1061/%28ASCE%290733-9445%281998%29124%3A7%28792%29.
Fisher, J. 1981. Bridge fatigue guide—Design and details. Chicago: American Institute of Steel Construction.
Fothergill, J. C. 1990. “Estimating the cumulative probability of failure data points to be plotted on Weibull and other probability paper.” IEEE Trans. Electr. Insul. 25 (3): 489–492. https://doi.org/10.1109/14.55721.
Goglio, L., and M. Rossetto. 2004. “Comparison of fatigue data using the maximum likelihood method.” Eng. Fract. Mech. 71 (4): 725–736. https://doi.org/10.1016/S0013-7944(03)00009-2.
ISO. 2012. Metallic materials—Fatigue testing—Statistical planning and analysis of data. BS ISO 12107. Geneva: ISO.
Júnior, R., and A. Belísio. 2014. “Probabilistic S–N curves using exponential and power laws equations.” Composites Part B 56 (Jan): 582–590. https://doi.org/10.1016/j.compositesb.2013.08.036.
Kulak, G. 2000. “Fatigue strength of riveted shear splices.” Prog. Struct. Mater. Eng. 2 (1): 110–119. https://doi.org/10.1002/(SICI)1528-2716(200001/03)2:1%3C110::AID-PSE13%3E3.0.CO;2-6.
Lesiuk, G., S. Sire, M. Ragueneau, J. A. F. O. Correia, B. A. S. Pedrosa, and A. M. P. De Jesus. 2019. “Mean stress effect and fatigue crack closure in material from old bridge erected in the late 19th century.” Procedia Struct. Integr. 17 (Jan): 198–205. https://doi.org/10.1016/j.prostr.2019.08.027.
Mayorga, L. G., S. Sire, J. A. F. D. O. Correia, A. M. P. De Jesus, I. Valente, C. Rebelo, A. Fernández-Canteli, M. Ragueneau, and B. Plu. 2016. “Design S-N curves for old Portuguese and French riveted bridges connections based on statistical analyses.” Procedia Eng. 160 (Jan): 77–84. https://doi.org/10.1016/j.proeng.2016.08.865.
Mohammad, A. 2002. “Fatigue in riveted railway bridges.” Ph.D. thesis, Dept. of Structural Engineering, Steel and Timber Structures, Chalmers Univ. of Technology.
Pedrosa, B., J. Correia, C. Rebelo, G. Lesiuk, A. De Jesus, A. Fernandes, M. Duda, R. Calçada, and M. Veljkovic. 2019. “Fatigue resistance curves for single and double shear riveted joints from old Portuguese metallic bridges.” Eng. Fail. Anal. 96 (Feb): 255–273. https://doi.org/10.1016/j.engfailanal.2018.10.009.
Sakin, R., and İ. Ay. 2008. “Statistical analysis of bending fatigue life data using Weibull distribution in glass-fiber reinforced polyester composites.” Mater. Des. 29 (6): 1170–1181. https://doi.org/10.1016/j.matdes.2007.05.005.
Sanches, R., A. De Jesus, J. Correia, A. Da Silva, and A. Fernandes. 2015. “A probabilistic fatigue approach for riveted joints using Monte Carlo simulation.” J. Constr. Steel Res. 110 (Jul): 149–162. https://doi.org/10.1016/j.jcsr.2015.02.019.
Schijve, J. 2004. Fatigue of structures and materials. New York: Springer.
Schijve, J. 2005. “Statistical distribution functions and fatigue of structures.” Int. J. Fatigue 27 (9): 1031–1039. https://doi.org/10.1016/j.ijfatigue.2005.03.001.
Taras, A., and G. Greiner. 2010a. Statistical background to the proposed fatigue class catalogue for riveted components. Graz, Austria: Graz Univ. of Technology.
Taras, A., and R. Greiner. 2010b. “Development and application of a fatigue class catalogue for riveted bridge components.” Struct. Eng. Int. 20 (1): 91–103. https://doi.org/10.2749/101686610791555810.
Weibull, W. 1951. “A statistical distribution function of wide applicability.” J. Appl. Mech. 18 293–297.
Zhang, L., M. Xie, and L. Tang. 2008. “On weighted least squares estimation for the parameters of Weibull distribution.” In Recent advances in reliability and quality in design: Springer series in reliability engineering, edited by H. Pham. London: Springer.
Zhao, Y. X., B. Yang, M. F. Feng, and H. Wang. 2009. “Probabilistic fatigue S–N curves including the super-long life regime of a railway axle steel.” Int. J. Fatigue 31 (10): 1550–1558. https://doi.org/10.1016/j.ijfatigue.2009.04.016.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Mar 24, 2020
Accepted: Apr 28, 2020
Published online: Jun 30, 2020
Published in print: Sep 1, 2020
Discussion open until: Nov 30, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.