Reliability Assessment of Steel Lattice Tower Subjected to Random Wind Load by the Stochastic Finite-Element Method
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 6, Issue 1
Abstract
This work concerns the stochastic finite-element method (SFEM) reliability analysis of a skeletal, very slender steel telecommunication tower calibrated with a full-scale pushover experiment carried out for the same tower. The basic SFEM implementation is completed with common application of the generalized stochastic perturbation technique (SPT) and of the response function method with polynomial basis of the statistically optimized order. Verification of the proposed stochastic technique is carried out for the first four probabilistic moments by a comparison with traditional crude Monte Carlo simulation and, alternatively, with semianalytical methodology using the same polynomial structural responses as SPT and the well-known probabilistic integral definitions. Characteristic mean wind speed is introduced here as the input random Gaussian variable, while the computational model is subjected to the wind profile linearly dependent upon this mean speed consistent with applicable European design codes. The SFEM analysis is carried out here including large deformations of the tower elements and dynamic excitations in each node induced by the given trial wind spectrum. Finally, second-order reliability method (SORM) analysis is provided on the basis of the resulting extreme normal forces in the tower legs and their counterparts taken directly from the full-scale pushover experiments. The obtained results show that reliability indices for these towers according to the engineering codes have larger magnitudes than these corresponding to the experimental statistics and SFEM.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The first author would like to express his deepest gratitude to T-Mobile Poland S.A., whose financial support made full-scale experimental testing of the steel lattice towers project possible. He would also like to express his personal gratefulness to Mr. Michał Wójcicki.
References
Albermani, F., S. Kitipornchai, and R. W. K. Chan. 2009. “Failure analysis of transmission towers.” Eng. Failure Anal. 16 (6): 1922–1928.
Au, S., and J. Beck. 2001. “First excursion probabilities for linear systems by very efficient important sampling.” Probab. Eng. Mech. 16 (3): 193–207. https://doi.org/10.1016/S0266-8920(01)00002-9.
Bathe, K. J. 1996. Finite element procedures. New York: Prentice Hall.
Belloli, M., Z. Rosa, and A. Zasso. 2014. “Wind loads on high slender tower: Numerical and experimental comparison.” Eng. Struct. 68 (Jun): 24–32. https://doi.org/10.1016/j.engstruct.2014.02.030.
Benítez, M. J., and F. J. Montánas. 2013. “The value of numerical amplification matrices in time integration methods.” Comput. Struct. 128 (Nov): 243–250. https://doi.org/10.1016/j.compstruc.2013.07.001.
Breitung, K. 1984. “Asymptotic approximation for multi-normal integrals.” J. Eng. Mech. 110 (3): 357–366. https://doi.org/10.1061/(ASCE)0733-9399(1984)110:3(357).
Carassale, L., and G. Solari. 2006. “Monte Carlo simulations of wind velocity fields on complex structures.” J. Wind Eng. Ind. Aerodyn. 94 (5): 323–339. https://doi.org/10.1016/j.jweia.2006.01.004.
Carril, C. F., Jr., N. Isyumov, and M. L. R. F. Reyolando. 2003. “Experimental study of the wind forces rectangular latticed communication towers with antennas.” J. Wind Eng. Ind. Aerodyn. 91 (8): 1007–1022.
CEN (European Committee for Standardization). 2005. Eurocode 0: Basis of structural design. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2008. Eurocode 3: Design of steel structures. Towers, masts and chimneys. Tower and masts. Brussels, Belgium: CEN.
Cornell, C. A. 1968. “Engineering seismic risk analysis.” Bull. Seismol. Soc. Am. 58 (5): 1583–1606.
Deoliya, R., and T. K. Datta. 2000. “Reliability analysis of a microwave tower for fluctuating mean wind with directional effect.” Reliab. Eng. Syst. Saf. 67 (3): 257–267. https://doi.org/10.1016/S0951-8320(99)00053-8.
Elishakoff, I., S. van Manen, P. G. Vermeulen, and J. Arbocz. 1987. “First-order second-moment analysis of the buckling of shells with random imperfections.” AIAA J. 25 (8): 1113–1117. https://doi.org/10.2514/3.9751.
Flaga, A. 2008. Wind engineering. Base and applications. [In Polish.] Warsaw, Poland: Arkady.
Goller, B., H. J. Pradlwarter, and G. I. Schuëller. 2013. “Reliability assessment in structural dynamics.” J. Sound Vib. 332 (10): 2488–2499. https://doi.org/10.1016/j.jsv.2012.11.021.
He, J. 2009. “Numerical calculation for first excursion probabilities.” Probab. Eng. Mech. 24 (3): 418–425. https://doi.org/10.1016/j.probengmech.2008.12.003.
Holmes, J. D. 1996a. “Along-wind response of lattice towers—II. Aerodynamic damping and deflections.” Eng. Struct. 18 (7): 483–488. https://doi.org/10.1016/0141-0296(95)00131-X.
Holmes, J. D. 1996b. “Along-wind response of lattice towers—III. Effective load distributions.” Eng. Struct. 18 (7): 489–494. https://doi.org/10.1016/0141-0296(95)00166-2.
Holmes, J. D. 2015. Wind loading of structures. 3rded. Boca Raton, FL: CRC Press.
Hughes, T. J. R. 2000. The finite element method—Linear static and dynamic finite element analysis. New York: Dover Publications.
Jiang, W. Q., Z. Q. Wang, G. McClure, G. L. Wang, and J. D. Geng. 2011. “Accurate modelling of joint effects in lattice transmission towers.” Eng. Struct. 33 (5): 1817–1827. https://doi.org/10.1016/j.engstruct.2011.02.022.
Kamiński, M. 2013. The stochastic perturbation method for computational mechanics. Chichester, UK: Wiley.
Kamiński, M., and M. Solecka. 2013. “Optimization of the truss-type structures using the generalized perturbation-based stochastic finite element method.” Finite Elem. Anal. Des. 63 (Jan): 69–79. https://doi.org/10.1016/j.finel.2012.08.002.
Kamiński, M., and J. Szafran. 2009. “Random eigenvibrations of elastic structures by the response function method and the generalized stochastic perturbation technique.” Arch. Civ. Mech. Eng. 9 (4): 5–32. https://doi.org/10.1016/S1644-9665(12)60066-1.
Katafygiotis, L., and S. Cheung. 2006. “Domain decomposition method for calculating the failure probability of linear dynamic systems subjected to Gaussian stochastic loads.” J. Eng. Mech. 132 (5): 475–486. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:5(475).
Kitipornchai, S., and F. Albermani. 1993. “Nonlinear finite element analysis of latticed transmission towers.” Eng. Struct. 15 (4): 259–269. https://doi.org/10.1016/0141-0296(93)90029-4.
Lacoma, L. M., and I. Romero. 2017. “Error estimations for HHT method in non-linear solid dynamics.” Comput. Struct. 85 (3–4): 158–169. https://doi.org/10.1016/j.compstruc.2006.08.072.
Lee, P. S., and G. McClure. 2007. “Elastoplastic large deformation analysis of a lattice steel tower structure and comparison with full-scale tests.” J. Constr. Steel Res. 63 (5): 709–717. https://doi.org/10.1016/j.jcsr.2006.06.041.
Madsen, H. O., S. Krenk, and N. C. Lind. 1986. Methods of structural safety. Englewood Cliffs, NJ: Prentice Hall.
Martín, P., V. B. Elena, A. M. Loredo-Souza, and E. B. Camaño. 2016. “Experimental study of the effects of dish antennas on the wind loading of telecommunication towers.” J. Wind Eng. Ind. Aerodyn. 149 (Feb): 40–47. https://doi.org/10.1016/j.jweia.2015.11.010.
Melchers, R. E., and A. T. Beck. 2018. Structural reliability analysis and prediction, 497. Hoboken, NJ: Wiley.
Mignolet, M. P., and C. Soize. 2008. “Nonparametric stochastic modeling of linear system with prescribed variance of several natural frequencies.” Probab. Eng. Mech. 23 (2–3): 267–278. https://doi.org/10.1016/j.probengmech.2007.12.027.
Muscolino, G., G. Ricciardi, and M. Vasta. 1997. “Stationary and non-stationary probability density function of non-linear oscillators.” Int. J. Non Linear Mech. 32 (6): 1051–1064. https://doi.org/10.1016/S0020-7462(96)00134-5.
Newmark, N. M. 1959. “A method of computational for structural dynamics.” J. Eng. Mech. Div. 85 (3): 67–94.
Nguyen, C. H., A. Freda, G. Solari, and F. Tubino. 2015. “Aeroelastic instability and wind-excited response of complex lighting poles and antenna masts.” Eng. Struct. 85 (Feb): 264–276. https://doi.org/10.1016/j.engstruct.2014.12.015.
Pradlwarter, H. J., and G. I. Schuëller. 2009. “Uncertain linear systems in dynamics: retrospective and recent developments by stochastic approaches.” Eng. Struct. 31 (11): 2507–2517. https://doi.org/10.1016/j.engstruct.2009.07.005.
Pradlwarter, H. J., and G. I. Schuëller. 2010. “Uncertain linear systems in dynamics: Efficient stochastic reliability assessment.” Comput. Struct. 88 (1–2): 74–86. https://doi.org/10.1016/j.compstruc.2009.06.010.
Prasad R. N., G. M. Samuel Knight, S. J. Mohan, and N. Lakshmanan. 2012. “Studies on failure of transmission line towers in testing.” Eng. Struct. 35 (Feb): 55–70. https://doi.org/10.1016/j.engstruct.2011.10.017.
Repetto, M. P., and G. Solari. 2001. “Dynamic along wind fatigue of slender and vertical structures.” Eng. Struct. 23 (2): 1622–1633. https://doi.org/10.1016/S0141-0296(01)00021-9.
Repetto, M. P., and G. Solari. 2010. “Wind-induced fatigue collapse of real slender structures.” Eng. Struct. 32 (12): 3888–3898. https://doi.org/10.1016/j.engstruct.2010.09.002.
Roberts, J. B., and P. D. Spanos. 1986. “Stochastic averaging: An approximation method of solving random vibration problems.” Int. J. Non Linear Mech. 21 (2): 111–134. https://doi.org/10.1016/0020-7462(86)90025-9.
Roberts, J. B., and P. D. Spanos. 1990. Random vibration and statistical linearization. Chichester, UK: Wiley.
Smith, B. W. 2007. Communication structures. London: Thomas Telford Publishing.
Sobczyk, K., S. Wedrychowicz, and B. F. Spencer. 1996. “Dynamics of structural systems with spatial randomness.” Int. J. Solids Struct. 33 (11): 1651–1669. https://doi.org/10.1016/0020-7683(95)00113-1.
Soize, C. 2013. “Stochastic modeling of uncertainties in computational structural dynamics—Recent theoretical advances.” J. Sound Vibr. 332 (10): 2379–2395. https://doi.org/10.1016/j.jsv.2011.10.010.
Spanos, P. D. 1981. “Stochastic linearization in structural dynamics.” ASME Appl. Mech. Rev. 34 (1): 1–8.
Szafran, J., K. Juszczyk, and M. Kamiński. 2016. “Dynamic response of the steel chimney by the stochastic perturbation based finite element method.” In Advances in mechanics: Theoretical, computational and interdisciplinary issues, 559–562. Boca Raton, FL: CRC Press.
Szafran, J., and M. Kamiński. 2013. “On application of the least square stochastic finite element method in structural dynamics.” In Proc., Computer Methods in Mechanics Conf., 245–246. Poznań, Poland.
Szafran, J., and K. Rykaluk. 2016. “A full-scale experiment of a lattice telecommunication tower under breaking load.” J. Constr. Steel Res. 120 (Apr): 160–175. https://doi.org/10.1016/j.jcsr.2016.01.006.
Travanca, R., H. Varum, and P. V. Real. 2013. “The past 20 years of telecommunication structures in Portugal.” Eng. Struct. 48 (Mar): 472–485.
Valdebenito, M. A., H. A. Jensen, G. I. Schuëller, and F. E. Caro. 2012. “Reliability sensitivity estimation of linear systems under stochastic excitation.” Comput. Struct. 92–93 (Feb): 257–268. https://doi.org/10.1016/j.compstruc.2011.10.020.
Wittmann, F. H., and F. X. Schneider. 1974. Wind and vibrations measurements at the Munich television tower. Montreal: Superior Fashion School of Montreal.
Information & Authors
Information
Published In
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 6 • Issue 1 • March 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jul 13, 2018
Accepted: Jul 9, 2019
Published online: Jan 8, 2020
Published in print: Mar 1, 2020
Discussion open until: Jun 8, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.