Performance-Based Seismic Design of Steel Buildings Using Rigidities of Connections
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 4, Issue 1
Abstract
This paper develops a performance-based seismic design (PBSD) procedure specifically for steel structures. Several improved steel connections were proposed to eliminate brittle fractures in welds following the Northridge earthquake of 1994. Making connections more flexible was considered to be an attractive option. One type of flexible connection considered in this study is expected to be economical and improve the behavior of steel structures, making them more seismic load–tolerant. However, the partial rigidities of connections need to be considered appropriately. To consider major sources of nonlinearity and rigidities of connections, structures are represented by finite elements. Steel structures are excited by seismic loading applied in the time domain, as required for the most sophisticated analysis. The algorithm incorporates major sources of uncertainty. To implement the PBSD concept, a novel reliability evaluation technique is proposed by integrating the first-order reliability method, the response surface method, and the advanced factorial design concept, producing compounding beneficial effects. The accuracy and efficiency of the procedure are verified with three informative examples. The study confirms the benefits of multiple deterministic analyses, as suggested in recent design guidelines. The behavior of the post-Northridge design is demonstrated to be superior to that of the pre-Northridge design, as expected. The PBSD procedure is appropriately documented for practicing engineers working on structural steel design and construction for everyday use.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank to several agencies of the government of Mexico that supported this research: CONACYT, Universidad Autónoma de Sinaloa (UAS), and Dirección General de Relaciones Internacionales de la Secretaria de Educación Pública (DGRI-SEP). The work is also partially supported by the National Science Foundation under Grant No. CMMI-1403844. Any opinions, findings, conclusions, or recommendations expressed in this paper are those of the authors and do not necessarily reflect the views of the sponsors.
References
AISC. (2011). Steel construction manual, Chicago.
ASCE. (2010). “Minimum design loads for buildings and other structures.” ASCE/SEI 7–10, Reston, VA.
Au, S. K., and Beck, J. L. (1999). “A new adaptive importance sampling scheme for reliability calculations.” Struct. Saf., 21(2), 135–158.
Au, S. K., and Beck, J. L. (2001). “First excursion probabilities for linear systems by very efficient importance sampling.” Probab. Eng. Mech., 16(3), 193–207.
Box, G. E., Hunter, W. G., and Hunter, J. S. (1978). Statistics for experimenters: An introduction to design, data analysis, and model building, Wiley, New York.
Brunesi, E., Nascimbene, R., and Rassati, G. A. (2015). “Seismic response of MRFs with partially-restrained bolted beam-to-column connections through FE analyses.” J. Constr. Steel Res., 107, 37–49.
Clough, R. W., and Penzien, J. (1993). Dynamics of structures, McGraw-Hill, New York.
Colson, A. (1991). “Theoretical modeling of semirigid connections behavior.” J. Constr. Steel Res., 19(3), 213–224.
Cornell, C. A., Jalayer, F., Hamburger, R. O., and Foutch, D. A. (2002). “Probabilistic basis for 2000 SAC Federal Emergency Management Agency steel moment frame guidelines.” J. Struct. Eng., 526–533.
Der Kiureghian, A., Haukaas, T., and Fujimura, K. (2006). “Structural reliability software at the University of California, Berkeley.” Struct. Saf., 28(1), 44–67.
Elsati, M. K., and Richard, R. M. (1996). “Derived moment rotation curves for partially restrained connections.” Struct. Eng. Rev., 2(8), 151–158.
Engelhardt, M. D., and Sabol, T. A. (1998). “Reinforcing of steel moment connections with cover plates: Benefits and limitations.” Eng. Struct., 20(4–6), 510–520.
Faravelli, L. (1989). “Response-surface approach for reliability analysis.” J. Eng. Mech., 2763–2781.
FEMA. (1997). “NEHRP Guidelines for the seismic rehabilitation of buildings.” FEMA-273, Washington, DC.
FEMA. (2000a). “Recommended seismic design criteria for new steel moment-frame buildings.” FEMA-350, Washington, DC.
FEMA. (2000b). “State of the art report on performance prediction and evaluation of steel moment-frame buildings.” FEMA-355F, Washington, DC.
FEMA. (2000c). “State of the art report on systems performance of steel moment frames subject to earthquake ground shaking.” FEMA-355C, Washington, DC.
FEMA. (2009). “Quantification of building seismic performance factors.” FEMA P695, Washington, DC.
Gao, L., and Haldar, A. (1995). “Nonlinear seismic analysis of space structures with partially restrained connections.” Comput.-Aided Civ. Infrastruct. Eng., 10(1), 27–37.
Haldar, A., and Mahadevan, S. (2000a). Probability, reliability, and statistical methods in engineering design, Wiley, New York.
Haldar, A., and Mahadevan, S. (2000b). Reliability assessment using stochastic finite element analysis, Wiley, New York.
Haldar, A., and Nee, K. M. (1989). “Elasto-plastic large deformation analysis of PR steel frames for LRFD.” Comput. Struct., 31(5), 811–823.
Hamburger, R. O., Foutch, D. A., and Cornell, C. A. (2003). “Translating research to practice: FEMA/SAC performance-based design procedures.” Earthquake Spectra, 19(2), 255–267.
Hinton, E., and Owen, D. R. J. (1986). Finite elements in plasticity: Theory and practice, Pineridge Press, Swansea, U.K.
Khuri, A. I., and Cornell, J. A. (1996). Response surfaces: Designs and analyses, Marcel Dekker, New York.
Kondoh, K., and Atluri, S. N. (1987). “Large-deformation, elasto-plastic analysis of frames under nonconservative loading, using explicitly derived tangent stiffnesses based on assumed stresses.” Comput. Mech., 2(1), 1–25.
Koo, H., Der Kiureghian, A., and Fujimura, K. (2005). “Design-point excitation for non-linear random vibrations.” Probab. Eng. Mech., 20(2), 136–147.
Lee, S. Y., and Haldar, A. (2003). “Reliability of frame and shear wall structural systems. II: Dynamic loading.” J. Struct. Eng., 233–240.
Mehrabian, A., Ali, T., and Haldar, A. (2009). “Nonlinear analysis of a steel frame.” Nonlinear Anal. Theor. Methods Appl., 71(12), e616–e623.
Mehrabian, A., Haldar, A., and Reyes-Salazar, A. (2005). “Seismic response analysis of steel frames with post-Northridge connection.” Steel Compos. Struct., 5(4), 271–287.
Nguyen, P. C., and Kim, S. E. (2015). “Second-order spread-of-plasticity approach for nonlinear time-history analysis of space semi-rigid steel frames.” Finite Elem. Anal. Des., 105, 1–15.
Pecce, M., and Rossi, F. (2015). “The experimental behavior and simple modeling of joints in composite MRFs.” Eng. Struct., 105, 249–263.
Pirmoz, A., and Liu, M. M. (2017). “Direct displacement-based seismic design of semi-rigid steel frames.” J. Constr. Steel Res., 128, 201–209.
Popov, E. P., Yang, T. S., and Chang, S. P. (1998). “Design of steel MRF connections before and after 1994 Northridge earthquake.” Eng. Struct., 20(12), 1030–1038.
Razavi, M., and Abolmaali, A. (2014). “Earthquake resistance frames with combination of rigid and semi-rigid connections.” J. Constr. Steel Res., 98, 1–11.
Reyes-Salazar, A. (2002). “Ductility and ductility reduction factor for MDOF systems.” Struct. Eng. Mech., 13(4), 369–385.
Reyes-Salazar, A., and Haldar, A. (1999). “Nonlinear seismic response of steel structures with semi-rigid and composite connections.” J. Constr. Steel Res., 51(1), 37–59.
Reyes-Salazar, A., and Haldar, A. (2000). “Dissipation of energy in steel frames with PR connections.” Struct. Eng. Mech., 9(3), 241–256.
Reyes-Salazar, A., and Haldar, A. (2001). “Seismic response and energy dissipation in partially restrained and fully restrained steel frames: An analytical study.” Steel Composite Struct., 1(4), 459–480.
Richard, R. M., Allen, C. J., and Partridge, J. E. (1997). “Proprietary slotted beam connection designs.” Modern steel construction, Chicago, 28–33.
Somerville, P. G. (1997). Development of ground motion time histories for phase 2 of the FEMA/SAC steel project, SAC Joint Venture, Federal Emergency Management Agency, Washington, DC.
Tangaramvong, S., Tin-Loi, F., Yang, C., and Gao, W. (2016). “Interval analysis of nonlinear frames with uncertain connection properties.” Int. J. Non Linear Mech., 86, 83–95.
Wen, Y. K. (2001). “Reliability and performance-based design.” Structural Safety, 23(4), 407–428.
Yun, S. Y., Hamburger, R. O., Cornell, C. A., and Foutch, D. A. (2002). “Seismic performance evaluation for steel moment frames.” J. Struct. Eng., 534–545.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 12, 2017
Accepted: Jul 24, 2017
Published online: Nov 27, 2017
Published in print: Mar 1, 2018
Discussion open until: Apr 27, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.