Statistical Investigation of Effective Prestress in Prestressed Concrete Bridges
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 3, Issue 4
Abstract
The effective pretress of a strand is very important for prestressed concrete (PC) bridges because it can influence cracking and deflections. At present, the effective prestress is obtained by means of calculating the theoretical prestress loss, which is a theoretical value. However, because of uncertainty in estimating prestress losses and tensioning prestress tendons, the actual effective prestress can be very different from the theoretical values. In this paper, the transverse-tensile-incremental method (TTIM) is applied to investigate the effective prestress of prestressing tendons for PC bridges. First, a -type strand was tensioned with a fixed force on a machine, and the strand tensile force was tested by a specific instrument manufactured according to the TTIM. An error analysis between the fixed force and tested force was conducted to certify the instrument’s accuracy. The results showed that the error range was from 0.03 to 3.71% when the prestressing tendons tension was between 60 and 200 kN (for the -type strand, the tensile stress mean was from 428.6 to 1,428.6 MPa). Therefore, it can be accepted that the TTIM could be used in actual testing. Second, a total of 141 on-site measurements were collected and analyzed. A statistical parameter was introduced to be the statistical objective for the effective prestress of a strand. This parameter was defined as the ratio of mean effective prestress from the testing value to that from theoretical calculation. A statistical analysis was carried out to determine an appropriate probability distribution for the using commercially available software. Based on the collected specimens, a normal distribution was found to be an appropriate probability distribution, and the distribution parameter is . Finally, an example of a reliability assessment was demonstrated using a simply supported T-beam. The anticrack reliability index for the section bottom of the midspan is when the uncertainty of effective prestress was considered, whereas if the uncertainty is neglected. Therefore the anticrack reliability would be overestimated if the uncertainty of effective prestress is not included. The method proposed in this paper can provide a way to properly consider the uncertainty of effective prestress and subsequently be used in anticrack reliability assessments for PC bridges.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was supported, in part, by the Open Foundation from the National Engineering Laboratory of Bridge Structure Safety Technology at Chang’an University (No. 310821151103). The support is gratefully acknowledged.
References
ABAQUS [Computer software]. Dassault Systèmes, Waltham, MA.
Abraham, M. A., Sooyong, P., and Norris, S. (1995). “Loss of prestress prediction based on nondestructive damage location algorithms.” Smart Structures and Materials’ 95, International Society for Optics and Photonics, Bellingham, WA, 60–67.
Ang, A. H.-S., and Tang, W. H. (2007). Probability concepts in engineering: Emphasis on applications to civil & environmental engineering, Wiley, New York.
Burns, N. H., Helwig, T., and Tsujimoto, T. (1991). “Effective prestress force in continuous post-tensioned beams with unbonded tendons.” ACI Struct. J., 88(1), 84–90.
Caro, L. A., Martí-Vargas, J. R., and Serna, P. (2013). “Prestress losses evaluation in prestressed concrete prismatic specimens.” Eng. Struct., 48(3), 704–715.
Chang’an University. (2008a). “Report for effective prestress inspection of bridge of Xin-Cun bridge.” Xi’an, China.
Chang’an University. (2008b). “Report for effective prestress inspection of bridge of Za-Yi-Bu bridge.” Xi’an, China.
Chang’an University. (2008c). Report for the research of inspection on prestress for mid-span and long-span concrete bridges, Xi’an, China.
Chang’an University. (2009a). “Report for research and application of temperature difference effect, eternal prestress and health monitoring technology for long-span continuous rigid frame bridge box girder.” Xi’an, China.
Chang’an University. (2009b). “Report for strand corrosion and effective prestress inspection of auxiliary shipping channel bridge of Hu-Men bridge.” Xi’an, China.
Chang’an University. (2012a). “Report for bridge inspection and load test about Shi-Suo Expressway in Yun Nan province.” Xi’an, China.
Chang’an University. (2012b). “Report for effective prestress inspection of bridge of Mao-Cao-Tang bridge.” Xi’an, China.
Chang’an University. (2012c). “Report for effective prestress inspection of bridge of Qian-Jiang Channel South Connection Viaduct.” Xi’an, China.
Chang’an University. (2012d). “Report for effective prestress inspection of bridge of Yi-Wan-Shui bridge.” Xi’an, China.
Chang’an University. (2012e). “Report for effective prestress inspection of bridge of Zu-She bridge.” Xi’an, China.
Chang’an University. (2014). “Report for research and application of effective prestress about PC bridges.” Xi’an, China.
Chen, H.-L., and Wissawapaisal, K. (2001). “Measurement of tensile forces in a seven-wire prestressing strand using stress waves.” J. Eng. Mech., 599–606.
Chen, H.-L., Yidong, H. E., and GangaRao, H. V. (1998). “Measurement of prestress force in the rods of stressed timber bridges using stress waves.” Mater. Eval., 56(8), 977–981.
China Ministry of Transportation. (2004). “Code for design of highway reinforced concrete and prestressed concrete bridges and culverts.” JTG D62-2004, Beijing.
Guo, Q., and Shuanhai, H. (2011). “Study on monitoring and evaluation model of decaying behavior of effective prestress for long-span PC bridges.” J. Highway Transp. Res. Dev., 28(5), 61–67.
Hamed, E., and Frostig, Y. (2006). “Natural frequencies of bonded and unbonded prestressed beams—Prestress force effects.” J. Sound Vib., 295(1), 28–39.
Ho, D.-D., Kim, J. T., Stubbs, N., and Park, W. S. (2012). “Prestress-force estimation in PSC girder using modal parameters and system identification.” Adv. Struct. Eng., 15(6), 997–1012.
Jang, J. B., Hwang, K. M., Lee, H. P., and Kim, B. H. (2013). “An assessment of the prestress force on the bonded tendon by SI and impact signal analysis techniques.” Nucl. Eng. Des., 255(2), 9–15.
Kim, B. H., Jang, J. B., Lee, H. P., and Lee, D. H. (2010). “Effect of prestress force on longitudinal vibration of bonded tendons embedded in a nuclear containment.” Nucl. Eng. Des., 240(6), 1281–1289.
Kim, B. H., Kim, S. J., Yeo, K. S., Jang, J. B., and Lee, H. P. (2011). “Estimating effective prestress force on grouted tendon by impact responses.” Dyn. Civil Struct., 4(4), 15–24.
Lee, H.-P., Jang, J. B., Hwang, K. M., and Song, Y. C. (2011). “Assessment of effective prestress force of PCCV using SI technique.” Eng. Appl. Residual Stress, 8(8), 131–138.
Lu, Z. R., and Law, S. S. (2006). “Identification of prestress force from measured structural responses.” Mech. Syst. Sig. Process., 20(8), 2186–2199.
MATLAB [Computer software]. MathWorks, Natick, MA.
Pessiki, S., Kaczinski, M., and Herbert, H. (1996). “Evaluation of effective prestress force in 28-year-old prestressed concrete bridge beams.” PCI J., 41(6), 78–89.
Shenoy, C. V., and Frantz, G. C. (1991). “Structural tests of 27-year-old prestressed concrete bridge beams.” PCI J., 36(5), 80–90.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Sep 7, 2016
Accepted: May 18, 2017
Published online: Sep 13, 2017
Published in print: Dec 1, 2017
Discussion open until: Feb 13, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.