Synchronous Control Theory and First Test of Time-Varying Upper Operation and Chassis Attitude Maintenance for Truck Cranes
Publication: Journal of Construction Engineering and Management
Volume 149, Issue 1
Abstract
Although truck cranes commonly employ outriggers for the horizontal attitude adjustment prior to operation, the time-varying operation of the upper-structure, e.g., telescoping, pitching, rotating, loading and unloading, constantly influences the attitude stability of the chassis. In extreme operating conditions, a tiny attitude change can have disastrous consequences, resulting tip-over accidents. Although there are monitoring and warning systems of the chassis attitude in practice, the research on its active control is rarely seen. In response to this, a synchronous control theory of the upper operation and the chassis attitude maintenance were proposed. First, the expression of the center of mass of a typical truck crane was built according to its mechanism and motion parameters. Then, the quasi-static load bearing model of the outrigger system was built in combination with the deformation compatibility condition, by which the mathematical relationship between the upper operation and chassis attitude disturbance, i.e., the compensatory length of each outrigger that is required to maintain the attitude stationary of the chassis, can be determined. Based on the above models, the tip-over early warning model of truck cranes was deduced, and a synchronous control strategy of time-varying upper operation and chassis attitude maintenance was proposed and preliminarily verified by tests based on an electromechanical experimental platform. Results showed that the attitude stability of the chassis is improved by about 80% after control, which is beneficial to improve the safety of the truck crane, the operating efficiency, and reduce the operating burden of the driver.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
We acknowledge the support received from the National Natural Science Foundation of China (No. 51705298).
References
Abo-Shanab, R., and N. Sepehri. 2006. “Tip-over responses of hydraulic mobile cranes.” Trans. Can. Soc. Mech. Eng. 30 (3): 391–412. https://doi.org/10.1139/tcsme-2006-0025.
Ali, G. M., J. Kosa, A. Bouferguene, and M. Al-Hussein. 2021. “Competitive assessment of ice and frozen silt mat for crane ground support using finite-element analysis.” J. Constr. Eng. Manage. 147 (6): 04021038. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002046.
An, J., M. Wu, J. She, and T. Terano. 2018. “Re-optimization strategy for truck cranes lift-path planning.” Autom. Constr. 90 (1): 146–155. https://doi.org/10.1016/j.autcon.2018.02.029.
Cao, L., C. Li, H. Chen, and C. Zhao. 2008. “Backstepping control of position synchronization system in crane lifter.” In Proc., 2008 IEEE Int. Conf. on Automation and Logistics, 2282–2285. New York: IEEE.
Cheng, X., X. Jiang, and Z. Cheng. 2013. “Design and exploration on automobile crane mobile counterweight balance.” Appl. Mech. Mater. 457 (4): 1503–1506. https://doi.org/10.4028/www.scientific.net/AMM.457-458.1503.
Fang, Y., and Y. K. Cho. 2016. “Effectiveness analysis from a cognitive perspective for a real-time safety assistance system for mobile crane lifting operations.” J. Constr. Eng. Manage. 143 (4): 05016025. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001258.
Feng, J. T., Q. H. Gao, X. Huang, and W. L. Guan. 2017. “Mathematical modeling and fuzzy control of a leveling and erecting mechanism.” Automatika 57 (3): 680–690. https://doi.org/10.7305/automatika.2017.02.1490.
Gao, Q., and H. X. Pan. 2010. “Leveling control technology of hydraulic system based on fuzzy decoupling algorithm.” In Proc., Int. Conf. on Networking and Information Tech. ICNIT 2010, 314–318. New York: IEEE.
Geranmehr, B., K. Vafaee, and A. Sadeqi. 2014 “High precision electro-hydraulic self leveling platform system.” In Proc., 2nd RSI/ISM Int. Conf. on Robotics and Mechatronics, ICRoM 2014, 29–34. New York: IEEE.
Hasan, S., M. AI-Hussein, U. H. Hermann, and S. Hassan. 2010. “Interactive and dynamic integrated module for mobile cranes supporting system design.” J. Constr. Eng. Manage. 136 (2): 179–186. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000121.
Huang, C., and J. Li. 2021. “Research on automatic leveling control based on improved PID neural network.” In Proc., 3rd Int. Conf. on Advanced Information Science and System (AISS 2021), 1–10. Sanya, China: Association for Computing Machinery.
Jeng, S. L., C. F. Yang, and W. H. Chieng. 2010. “Outrigger force measure for mobile crane safety based on linear programming optimization.” Mech. Based Des. Struct. 38 (2): 145–170. https://doi.org/10.1080/15397730903482702.
Kacalak, W., Z. Budniak, and M. Majewski. 2017. “Crane stability assessment method in the operating cycle.” Transp. Probl. 12 (4): 141–151. https://doi.org/10.20858/tp.2017.12.4.14.
Kalairassan, G., M. Boopathi, and R. M. Mohan. 2017. “Analysis of load monitoring system in hydraulic mobile cranes.” IOP Conf. Ser.: Mater. Sci. Eng. 263 (6): 062045. https://doi.org/10.1088/1757-899X/263/6/062045.
Kan, C. W., C. J. Anumba, Y. H. Fang, and J. Messner. 2018. “Use of analytical tools to mitigate mobile crane-related failures.” In Proc., Construction Research Congress (CRC 2018). Reston, VA: ASCE.
Li, D. Z. 2016. Crane with excellent working stability. Daejeon, South Korea: Korean Intellectual Property Office.
Li, H., X. Shi, and B. Wang. 2017. “Design and study of leg automatic leveling control system of military bridge.” In Proc., 16th Int. Conf. on Computer and Information Science (ICIS 2017), 311–314. New York: IEEE.
Mousaei, A., H. Taghaddos, B. S. Marzieh, and U. Hermann. 2021. “Optimizing heavy lift plans for industrial construction sites using Dijkstra’s algorithm.” J. Constr. Eng. Manage. 147 (11): 04021160. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002157.
Qian, J. B., L. P. Bao, R. B. Yuan, and X. J. Yang. 2017. “Modeling and analysis of outrigger reaction forces of hydraulic mobile crane.” Int. J. Eng. 30 (8): 1246–1252. https://doi.org/10.5829/ije.2017.30.08b.18.
Ramli, L., Z. Mohamed, M. A. Abdullahi, H. I. Jaafar, and I. M. Lazim. 2017. “Control strategies for crane systems: A comprehensive review.” Mech. Syst. Sig. Process. 95 (5): 1–23. https://doi.org/10.1016/j.ymssp.2017.03.015.
Rauch, A., W. Singhose, D. Fujioka, and T. Jones. 2013. “Tip-over stability analysis of mobile boom cranes with swinging payloads.” ASME J. Dyn. Syst. Meas. Control. 135 (3): 031008. https://doi.org/10.1115/1.4023276.
Richard, L. N., S. S. Noah, and K. R. Kyle. 2001. “A review of crane safety in the construction industry.” Appl. Occup. Environ. Hyg. 16 (12): 1106–1117. https://doi.org/10.1080/10473220127411.
Romanello, G. 2018. “Stability analysis of mobile cranes and determination of outriggers loading.” J. Eng. Design Technol. 16 (6): 938–958. https://doi.org/10.1108/JEDT-05-2018-0084.
Romanello, G. 2020. “A graphical approach for the determination of outrigger loads in mobile cranes.” Mech. Based Des. Struct. 2020 (1): 1–14. https://doi.org/10.1080/15397734.2020.1726184.
Shaikh, A. A., and D. D. Kumar. 2016. “Lifting capacity enhancement of a crawler crane by improving stability.” J. Theor. App. Mech. 54 (1): 219–227. https://doi.org/10.15632/jtam-pl.54.1.219.
Tan, M. 2020. Luffing self balancing device of crane. Beijing: Intellectual Property Publishing House.
Wang, W., H. Wei, and Y. Zhen. 2012. “Rollover protection method of track cranes based on variable amplitude oil pressure detection.” Chin. J. Mech. Eng. 48 (3): 159–164. https://doi.org/10.3901/JME.2012.03.159.
Xiao, J., Y. C. Wang, X. Y. Li, and J. Zheng. 2021. “Design of high precision mechatronic-hydraulic leveling system for vehicle-mounted radar.” In Proc., 4th Int. Conf. on Mechatronics and Computer Technology Engineering (MCTE 2021). Bristol, UK: IOPscience.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 12, 2022
Accepted: Aug 10, 2022
Published online: Nov 10, 2022
Published in print: Jan 1, 2023
Discussion open until: Apr 10, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Zhenqi Nie, Huiheng Wang, Bin Lu, Fan Zhang, Mingbo Wang, Zhenhua Wu, Xianyue Gang, Lijun Li, Development and first test of an attitude and load coupling adjustment chassis for aerial working platforms, Mechanics Based Design of Structures and Machines, 10.1080/15397734.2023.2168693, (1-19), (2023).
- Wojciech Kacalak, Zbigniew Budniak, Maciej Majewski, Modelling and Analysis of the Positioning Accuracy in the Loading Systems of Mobile Cranes, Materials, 10.3390/ma15238426, 15, 23, (8426), (2022).