Scale Transition in Steel-Concrete Interaction. II: Applications
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Engineering Mechanics
Volume 129, Issue 4
Abstract
The proposed mode of consideration of the steel-concrete interaction (Part I) is applied to real-life engineering structures. Two structures recently investigated numerically at Vienna University of Technology are considered: (1) the reinforced concrete (RC) cooling tower III Ptolemas SES (Greece) and (2) a part of the shotcrete tunnel lining installed at the Lainzer tunnel (Austria). In both examples, the uniaxial fracture criterion used in Part I is replaced by the maximum stress (Rankine) criterion. Together with the Drucker-Prager criterion, which is used for the simulation of compressive failure of concrete/shotcrete, it defines the space of admissible stress states in the framework of multisurface plasticity. For the simulation of early-age fracture of shotcrete, consideration of the steel-concrete interaction presented in Part I of this paper is extended towards young shotcrete. Similar to the benchmark problem investigated in Part I of this paper, several analyses with different degrees of consideration of the steel-concrete interaction are performed. The obtained results give insight into the influence of the steel-concrete interaction on the load-carrying behavior of the investigated structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
Baant, Z.(1979). “Thermodynamics of solidifying or melting viscoelastic material.” J. Eng. Mech. Div., ASCE, 105(6), 933–952.
Cedolin, L., and Poli, S. Dei(1977). “Finite element studies of shear-critical R/C beams.” J. Eng. Mech. Div., ASCE 103(3), 395–410.
Chapman, R., and Shah, S. (1987). “Early-age bond strength in reinforced concrete.” ACI Mater. J., November–December, 501–510.
Comité Euro-International du Béton-edération International de la Précontrainte (CEB-FIP). (1990). Model code 1990, bulletin d’information. CEB, Lausanne, Switzerland.
De Schutter, G., and Taerwe, L.(1997). “Fracture energy of concrete at early ages.” Mater. Struct., 30, 67–71.
Floegl, H., and Mang, H.(1982). “Tension stiffening concept based on bond slip.” J. Struct. Div. ASCE, 108(12), 2681–2701.
Hellmich, C., Mang, H., and Ulm, F.-J.(1999a). “Hybrid method for quantification of stress states in shotcrete tunnel shells: Combination of 3D in-situ displacement measurements and thermochemoplastic material law.” CD-ROM Proc., 1st European Conf. of Computational Mechanics, W. Wunderlich, ed., Munich, Germany;
also published in Comput. Struct., 79, 2103–2115 (2001).
Hellmich, C., Ulm, F.-J., and Mang, H. A.(1999b). “Multisurface chemoplasticity. I: Material model for shotcrete.” J. Eng. Mech., 125(6), 692–701.
Lackner, R., Hellmich, C., and Mang, H.(2002). “Constitutive modeling of cementitious materials in the framework of chemoplasticity.” Int. J. Numer. Methods Eng., 53(10), 2357–2388.
Lackner, R., and Mang, H.(2001a). “Adaptive FE analysis of RC shells. II: Applications.” J. Eng. Mech., 127(12), 1213–1222.
Lackner, R., and Mang, H. (2001b). “Chemoplastic material model for the simulation of early-age cracking: From experiments to the constitutive law.” Proc., RILEM Int. Conf. on Early Age Cracking of Cementitious Systems, K. Kovler and A. Bentur, eds., Haifa, Israel, 19–29.
Lackner, R., and Mang, H.(2001c). “Cracking in shotcrete tunnel shells.” Fracture Mechanics of Concrete Structures, Proc., 4th Int. Conf., R. de Borst, J. Mazars, G. Pijaudier-Cabor, and J. van Mier, eds., Cachan, France, 857–870;
also published in Eng. Frac. Mech. 70(7–8), 1047–1068 (2003).
Lackner, R., and Mang, H.(2002a). “A posteriori error estimation in nonlinear FE analyses of shell structures.” Int. J. Numer. Methods Eng., 53(10), 2329–2355.
Lackner, R., and Mang, H. (2002b). “Modeling of early-age fracture of shotcrete: Application to tunneling.” Proc., IUTAM Symposium on Analytical and Computational Fracture Mechanics of Non-homogeneous Materials, B. Karihaloo, ed., Cardiff, Wales, Kluwer Academic, Dordrecht, 197–210.
Lackner, R., and Mang, H. A.(2003). “Scale transition in steel-concrete interaction. I: Model.” J. Eng. Mech., 129(4), 393–402.
MARC (1996). MARC reference manual-Volume B, element library. MARC Analysis Research Corporation, Palo Alto, Calif. 94306. Multi-Purpose Finite Element Package.
Meschke, G.(1996). “Consideration of aging of shotcrete in the context of a 3D viscoplastic material model.” Int. J. Numer. Methods Eng., 39, 3123–3143.
Meschke, G., Huemer, Th., and Mang, H.(1999). “Computer-aided retrofitting of damaged RC cooling tower shell.” J. Struct. Eng., 125(3), 328–337.
Rokahr, R., and Zachow, R.(1997). “Ein neues Verfahren zur täglichen Kontrolle der Auslastung einer Spritzbetonschale (A new method for the daily monitoring of the stress intensity of a sprayed concrete lining).” Felsbau, 15(6), 430–434 (in German).
Ruetz, W. (1966). “Das Kriechen des Zementsteins im Beton und seine Beeinflussung durch gleichzeitiges Schwinden (Creep of cement in concrete as influenced by simultaneous shrinkage.)” Deutscher Ausschuß für Stahlbeton, Heft 183 (in German).
Sercombe, J., Hellmich, C., Ulm, F.-J., and Mang, H. A.(2000). “Modeling of early-age creep of shotcrete. I: Model and model parameters.” J. Eng. Mech., 126(3), 284–291.
Ulm, F.-J. (1998). “Couplages thermochémomécaniques dans les bétons: Un premier bilan. (Thermochemomechanical couplings in concretes: A first review).” Technical Rep., Laboratoires des Ponts et Chaussées, Paris (in French).
Wittmann, F. (1982). Creep and shrinkage mechanisms, Wiley, Chichester, England, Chap. 6, 129–161.
Zachow, R. (1995). “Dimensionierung zweischaliger Tunnel in Fels auf der Grundlage von in-situ Messungen (Dimensioning of bicoque tunnels in rock masses based on in situ measurements).” Technical Rep. 16, Univ. of Hannover, Hannover, Germany (in German).
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Dec 17, 2001
Accepted: Jul 24, 2002
Published online: Mar 14, 2003
Published in print: Apr 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.